Recently active
Hi, is there a possibility to install Flexnet license server silently on Windows Server Core 2022?or even install it on Windows Server Core 2022? br Bernhard
I would like to create a drawing template that pulls in notes that have been created in the Combined State model file, much the same way we can automatically pull in drawing views from the model file into the drawing. All my attempts to do this have failed. It seems like I can only pre-load pre-typed notes, rather than have the drawing pull in notes from the Combined State model file. Does anyone know of a way to accomplish this?Thanks.
1. Describe the ProblemModelCHECK is used to check for spelling errors in 2D drawings in Creo Parametric. However, the settings for ModelCHECK are controlled by administrative rights. Creo Parametric drawing mode needs to have a bult-in spell checker other than ModelCHECK or allow the end user to configure ModelCHECK for spelling without admin rights. 2. Are you using a workaround?No. There is no workaround to the admin rights.3. What is the use case for your organization?Giving the end user control over the spell checker will greatly enhance the overall quality of 2D drawings.4. What impact does this problem currently have on your organization?Cannot spell check drawings. IT department is understaffed to resolve the problem.
Hi everyone, I'm trying to run a custom Creo parametric C++ plugin by creating a Process in C# and calling "parametric.exe". I'm using Creo Parametric 7.0.9.0 with C# .NET Framework 4.8. This is the C# code to create the process and run parametric.exe: process.StartInfo.FileName = "\"C:\Program Files\PTC\Creo 7.0.9.0\Parametric\bin\parametric.exe\""; process.StartInfo.Arguments = $"+Assypath=\"{_settings.WorkingDirectory}\\{assemblyName}\" "; process.StartInfo.Arguments += $"+Output_Dir=\"{_settings.WorkingDirectory}\" "; ... // Some other arg setting... ... process.StartInfo.UseShellExecute = false; process.EnableRaisingEvents = true; process.StartInfo.RedirectStandardError = true; process.StartInfo.RedirectStandardOutput = true; process.Exited += (sender, args) => { int exitCode = process.ExitCode; if (exitCode == 0) { Logger.LogMessage("Ran successfully"); } else { Logger.LogMessage($"Exited with error code: {exitCode}"); } }; var errorData = new String
Hallo Community,ich stehe derzeit vor einem Problem und ich komme wirklich nicht mehr weiter. Ich möchte einen ergonomischen Fahrradgriff für ein studentisches Projekt konstruieren, der am Ende mittels 3D-Druck gefertigt werden soll. Ich habe ein Teil der Auflagefläche herausextrudiert, um später ein weicheres Material (evtl. TPU) entweder über 2 Komponentendruck oder durch mechanisches Fügen in einem extra Schritt auf die Fläche aufzubringen. Die Schritte dafür waren Versatz --> Profil --> Zusammenführen --> Verbundvolumen (Bem.: Das Modell besitzt Freiformflächen). Für die Auflagefläche benötige ich wiederum das zuvor herausextrudierte Volumen, das ich dann ggf. auch anpassen kann. Ich bin zunächst gleich vorgegangen und am Ende wollte ich mit beim Verbundvolumen Material auffüllen, was zu einer Fehlermeldung führte. Dann habe ich jeweils die untere und obere Skizzengeometrie auf die Fläche durch Zusammenführen erstellt. Wie bekomme ich jetzt ein Volumen aus diesen Flächen?
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Design systems / assemblies to address client challenges - from initial concept to delivering final product. 2. What version of Creo Parametric are you currently running?83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Unused models in drawings can only be deleted one-at-a-time from within the drawing and are only accessible from an old antiquated DOS-like menu. Unused models can accumulate from drawing revisions and if a drawing is copied and views are edited. You may not even know you have unused models that are taking up memory. And if you do know there are unused models in your drawing, it takes an inefficient use of effort and time to remove them. Modelcheck can be used to strip unused models from a drawing, but that's another step that shouldn't be necessary
Hi Community, Creo version in use 11.0.2.0 connected to Windchill 12.1.2.10 Does anyone here know a way to define a reference designator for a component used in a subassembly in the upper Assembly?Our use case:A - Top Assembly, B - Subassembly (Gathering Part) C - Component with an electrical designation e.g. R101 B - Subassembly (Gathering Part) C - Component with an electrical designation e.g. R102 Subassembly B is used several times within A, but it's actually just a "dummy" assembly which only exists in MCAD. When we now assign a reference designator for C, it is defined in B, hence it's always the same, but it should differ. Is there anything foreseen in Creo / Windchill to cover this? Follow up question would be if it's somehow possible that component C immediately appears in the WT-Part structure of A without generating a Part for B? Thanks and BR
I learned a little bit, but I haven't mastered it at all.It should be cold at one end and hot at the other, but I didn't expect that one end is hot and the other end is even hotter.Is there expert tell me where I am wrong?
I’m have a CFD project with an oil/water heat exchanger in a hydraulic tank. I would be studying how effective the cooler is at lowering the temperature of the oil over a given time so, it would be a transient analysis. The cooler has two cores with water looping through them in series. Each core has 182 copper tubes that are 0.4 mm thick and 170 aluminum fins that are 0.25 mm thick with a spacing of about 1.73 mm. I want to do cunjugate heat transfer across the solid geometry, but with so many components that are thin walled, the number of cells in the mesh woul be astronomical. I'm looking for suggestions on a basic approach to this analysis. Can the tubes and fins be compressed to mid-surfaces and run in CFA? That would require fewer cells in the solid domains. I see that there is something buried in the mesher about two fluid heat exchangers, but I haven't been able to find information on how to utilize that. Some direction there would be helpful too. &n
Hello everyone, I am currently working on a Creo Flow Analysis for a vacuum system. I was able to successfully set up an internal flow simulation, but I am facing errors when trying to include the ambient airflow around the nozzle.What I have set up successfully:Internal flow only:Inlet (nozzle entry): Set as 101325 Pa (atmospheric pressure).Outlet (nozzle exit, connected to the vacuum system): Defined as Volumetric Flux 400 m³/h (0.111 m³/s).This setup runs without issues.What I am trying to add:I want to simulate how air is being drawn from the surroundings into the nozzle.To do this, I added a large surrounding box to represent the air environment.The walls of the box are defined as inlet and outlet pressures (atmospheric pressure, 101325 Pa).The issue:When I include the ambient air domain, I get errors on the inlet and outlet boundaries of the nozzle.It seems like Creo does not handle both the internal flow and external airflow together properly.My goal is to see where the noz
can you tell me how to use this function. where is the Creat linked volume?
Hello, I am trying to render a simple fluid flow simulation in Simulation Live for Creo 9.0.1.0. When I add particles to the display it runs at about 2 FPS, this is with the Performance options set all the way to the left for "Speed". At this time, Creo is using 0-2% of my GPU.However, what is interesting, is when I rotate the model, the GPU usage jumps up to 60-70% and the FPS is smooth (closer to 30 FPS or more). I want to be able to have this speed and quality of animation without having to continuously rotate the model. Is this possible?
So, I joined a company that uses CREO 10. When I got here, I found out they also have SW Pro with SIM Pro with ECAD thermal analysis. I asked why and they stated that CREO Sim doesn't provide ECAD thermal analysis. So, I personally would rather use SW for our CAD - especially since we do the ECAD sim in SW already. Otherwise, it would be great to find a solution for CREO and move away from SW Sim. Now I know Ansys runs within CREO - but does CREO have a basic ECAD thermal simulation that is acceptable? Keep in mind money is the driving factor here - so spending 10's of thousands of dollars is not an option. So, the process of going from CREO to SW is just painful. If CREO has a decent solution it would solve a ton of issues. Is CREO simulation - especially for ECAD that bad? So, what does SW ECAD Sim offer - it allows for PCB board simplification allowing to input the PCB layers with copper weights - it allows for 2-R definition of electrical components - it allows for CFD an
I have been performing mechanism analysis for some time but I usually use align two entities and mate two entities option when creating initial point snapshots, either method gives me same results. I wonder what's the main difference between two options , I would like a very good use case to differentiate between them both.
I'm looking for some advice. It seems that ProDrawingFromTemplateCreate() does not allow for the use of a simplified representation to be utilized to create a new drawing (resulting in the drawing being created with 'master'). I want to avoid loading 'master' into a newly created drawing. How are others working around this limitation? I'm considering this approach:- Supply ProDrawingFromTemplateCreate() with a temporary empty assembly model to create drawing- Use ProDrawingAsmsimprepAdd() to add a preselected simp rep to the drawing- Delete the temporary assembly from the drawing. Thoughts?
No meu software versão 5.0, ao mudar uma peça do 3D para desenho 2D os elementos como parafusos e molas mesmo com esboço oculto e apenas extrudado está aparecendo automaticamente a linha de esboço dos elementos, que só fica oculta se selecionar cada componente e ocultar o esboço dentro da folha de desenho 2D, coisa que antes não ocorria.
Hello,I'm currently trying out the new Ansys Simulation Module. By doing so I wanted to run a couple of simulations but the Buttons "run" and "Generate Mesh" are greyed out. I've checked with a couple of different models and I've also created one just for checking the behavior. Even with just a cube, I can reproduce this behavior (Screenshots attached). Has anyone come across this problem and knows how to solve it? I'm starting to think it must have something to do with some settings? Any help is appreciated!
Hi, I am fairly new to CREO Schematics. So far I have been creating parts that come in 1 piece. The next challenge is to define a part with related accessories. Examples are:- A power switch mounted on a DIN rail with terminal covers and the shaft to connect to the rotator on the door (see image below)- A relay holder on a Din rail and the relay to plug into it (see image below)- A terminal block with a jumper to make a connection between the jumpers The goal is to have all these parts in Creo Schematics to allow outputting a complete BOM of parts with their related accessories. I am using Creo schematics 10.
Family table, "Copy instance to Generic" behavior is wrong. It prompts for "delete" action on feature If in a generic model i have a suppressed feature, in instance it is necessary to use * because creo will delete the feature in the family table and directly in the generic model tree. And if i have an active feature in the generic, using N on instance will delete features in the family table and directly in the generic model tree.Is it possible to activate boolean operation feature with family table when you want to use the feature copy instance to generic.If you want reproduce it : Open Part > Family tableSelect a feature as columnInsert Row > select "N" for feature Select instance row > Edit > Copy to genericThis fonctionnality is not working well and it is necessary to improve it.
Hi, I am trying to add BOM index and other part parameters in 3D MBD in creo. As Creo does not provide parametric tables, I am creating some parameters inside parts and want to show in the symbol attached to part. When I tried to use note with parameter, &description:att_mdl, it showed part level information. But if I add it in symbol, this does not work. If I add &description:mdl using variable text, it shows the assembly description, not part description where it is attached. Please let me know if anyone have any other workaround or solution.
Currently it is not possible to copy and paste special entire annotation features (with multiple elements) between different models, if there are surface references (for semantic relationship). Deleting the surface references enables the paste special functionality. It is possible to copy and paste annotation features with surface references within the same model. Proposal is to 1) Add a notification or prompt to user that CREO will automatically delete surface references upon pasting into a different model, or 2) Provide functionality to redefine references to surfaces (all solid surfaces for parts, discrete surfaces or quilts, discerete part surfaces etc).
It is necessary to provide the possibility of placing datum feature symbols on dimensional auxiliary lines of angular dimensions.This placement is already possible for linear dimensions. This is important for a reasonable use of the MDB and a fast and error-free generation of a drawing.
Currently you can not use a parameter in the additional text fields of a GTOL. If you try you will just get the text as you typed it and not the parameter value. See attached image for an example. This should work like notes, and virtually every other place within Creo. My main focus for this request if for model annotations but the same could apply to drawing annotations. This does not work in Creo 3 or 4.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric (7.0.9.0, applies to all versions)2. What is the problem?I can open this model in an empty simp rep, open the simp rep manager, and create or edit a simp rep--all without loading any 3D CAD. But if I want to get past this screen, my only choices are to Open (saves the simp rep definition and opens it to the graphics window), Cancel (undos any changes I made), or Apply (opens it to the graphics window but does not save the edited simp rep definition). This feels like what was most likely an oversight in the original UI design and was just never properly addressed, I should be able to just press something like "OK" and return to the previous screen without being forced to load all those models.3. Are you using a workaround? If yes, please describe it.A full workaround is not possible. While you can modify simp reps from the model tree to avoid the dialog
Currently, the only way to edit a simp rep, and then save those edits, is to make the simp rep active. When a simp rep contains a large number of items in a large assembly, the entire model must be loaded into memory before the simp rep can be edited. Enabling users to edit a simp rep without activating it would save time and resources in cases where 1 item needs to be added to the simp rep of a large assembly. Then next time the assy file is opened to that simp rep the edits will become evident.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.