Recently active
It would be highly beneficial to instead of only having the option to Save a Copy, but to also open that new copy at the same time. Very often I would like to make a new part that is a modification of a released part. To do that I Save a Copy, then I have to make sure I capture the new part number that was generated. Then I have to go into my workspace and find that part, and finally open the part so I can start my modifications. If I forget to grab that generated part number before I go off and do something else, then I have no hope of finding that part again later and I just make a new copy. But if there was an option to Save a Copy and Open, I can get to work faster and don't have to worry about getting distracted and missing the generated part number.
With no fanfare or warning (or even a note on the help page), exporting a design sheet will save your design. If you erase parts that you do not want exported, this will erase them from your design PERMANENTLY. At a minimum, the program should warn you and let you stop the process before it destroys design information. A better solution should be to give the user a choice to save or not to save.
The Layer control screen shows the options selected for each layer and allows the visibility to be set by clicking on the Visibility cell for the layer and allows the Name to be set by double clicking on the Name cell for the layer.It would improve the ease of use if the Unselectable, Protected, and Format settings could be set by clicking on their cells instead of selecting a layer, selecting Properties, and changing the setting. The Color settings could be double clicked in the same manner as the name to bring up the color selection menu.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Using Creo Schematics creating wiring diagrams, block diagrams and circuit diagrams. Electrical industry. I am a Electrical Designer maintaining our Schematics library and datatables. 2. What product and version are you currently running?Creo Schematics 4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When importing geometries from supplier DXF, DWG, etc. Schematics will not import if larger than the sheet size. instead provides an error and does nothing. We need a way to import geometries directly with an option for "resize to fit the sheet" same way creo parametric currently works.4. What is the use case for your organization?We use geometries from suppliers in which case it may be larger than the sheet size and will not import if larger than my sheet size.5. What business value would your
Our standard drawing units in most of our designs are still in Imperial Units (Inches). We have started to use metric for our Creo Schematics designs. To transfer a symbol or schematic over without having to recreate it we export a DXF and import to Creo Schematics. If we were previously using inches we get an error message stating: "The sheet Model cannot be imported because it is too large or the units are incorrect" While it's simple enough to change the units and re-export. This assumes we have a native file. If we only had a DXF we'd have to open it in another program, convert it, and then try to import it into Schematics.You can also create formats in the imported units. It would just save time if it was able to do the conversions on the fly. I would like to see a dialog box that pops up saying "The sheet Model is too large or the units are incorrect. Do you wish to attempt to convert the units or cancel import", or even better to check to see if the units are equivalent f
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Marine industry: end user 2. What version of Creo Parametric are you currently running?5.0 with Creo Schematics 7.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Electrical engineers build a schematic in Creo Schematics and send that design to the Creo users. Sometimes they change the text labels when they drop the blocks/ fibers , removing the parameter functionality. I would like a simple option to highlight parameter driven labels a different color, temporarily until a repaint is made. Then the Creo user can see when the labels are not using/pushing the parameters thru the XML data. they can then correct the labels and sync them with the parameters. The difficult part would be to separate a string such a as <AMP> AMPS to show&nbs
Solidworks and Catia have had this for over 10 years. Get with it PTC, you presented this prior to Creo 4 release. 1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. Medical manufacturing, Product Engineer 2. What product & version are you currently running? Creo 8 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Sweep an end mill along a 3d curve and properly represent the resultant geometry. I can program it in CNC, but I cannot show it in CAD, nor cad I render or simulate the proper geometry. 4. What is the use case for your organization? we do this all the time. 5. What business value would your suggestion represent for your organization? It should be obvious, we cannot show the proper part geometry across the platform. We cannot simulate it, render it, or describe in cad mod
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 9.0.6.0 2. What is the problem?When editing hatching in a drawing, for areas (like an ECAD Keep-Out), it uses the old menu manager system and not the newer ribbon in Creo 9 method that is used for section hatches. This is confusing our users who are expecting a consistent process for managing hatches.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The hatching mechanism and process would be consistent for all use-cases within Creo5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)This is causing slow down, confusion and some users are not even attempting to edit the hatching for areas as it is difficult. All of our produc
1. Are you using a workaround?Yes, we have to go into GD&T advisor to make the updates2. What is the use case for your organization?Here is what the help documentation used to say: The semantic references that are associated with a general profile tolerance are automatically updated with every model change. This is what I want.3. What impact does this problem currently have on your organization?This is not "automatic" which means I need to train users on how to use it and make it work. Training is not fool proof. I want fool proof. Its confusing to users that sematic references automatically get updated when they create geometry but not when they add annotations.Describe the Problem In Creo 10 a new fantastic feature was introduced that has an overall surface profile collect up all of the sematic references that are not currently tied to another annotation and makes them a sematic reference of a overall surface profile note. https://support.ptc.com/help/creo/creo_pma/r10.0/u
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Elements Direct Modeling 20.7.0.02. What is the problem?Automatic bolt hole circle creation does not work in Annotation if the bolt hole circle was created with a 2D profile Automatic bolt hole circle creation does not work with 2D punched patterns in Annotation Automatic bolt hole circle creation only works when using 3d feature as Machining or Custom Feature 3. Are you using a workaround? If yes, please describe it.After automatically creating holes with SolidPower or by working with 2D patterns and then punching, the holes must be defined again as a form element4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The automatic hole circle detection should work with any radially arranged holes on the same axis5. What impact does this problem curren
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I work in collaboration with a design for manufacturing group. My task is to list some rules established in order to avoid some manufacturing problem when we design particularly in sheet metal. 2. What version of Creo Parametric are you currently running?I am currently running creo parametric 7.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.My goal was to automate sheet metal rules in creo parametric in order to have some errors or warnings displayed automatically when we don't respect rules established. I have already searched some sheet metal rules in model properties in the sheet metal module but the verification is manual through the window "model information" where we have design rule-violation check. I have also found the tool "check rule" in files>prepare after previousl
I am using WF5/Creo. The number of files/drawings to be opened at one time is 15. Is there a reason that you can't have more than this?Thanks,Also, when editing a weld symbol - it treats the window as a 16th window. I recieved an error message that I had to many windows open. Try closing a few. I had 15 windows of files open and when I closed one, I was able to edit the weld symbol. Make the weld symbol editing box not the same type of feature/structure so that you if you have the drawing open currently, you would not get an error and the window would open normally for editing.April 11, 2013: Beside the window for welding, I just found that if I wanted to add a symbol, that window counts for one of you 15 windows too. I wasn't paying attention to the text line and clicked on the symbol icon, and it wasn't doing anything but silently screaming at me that I have to many windows already open.Sept 11, 2013: Wanting to add a symbol with 15 windows open bit me again - couldn't figure out why
Please include detailed documentation such as screenshots, images or video.Related to Article - CS257786 this behaviour is not part of the Creo View Adapter1. What product and version are you running?Creo View Adapter 10.12. What is the problem?We need the option to publish assemblies with supressed components and the option to not publish assemblies with missing components.3. Are you using a workaround? If yes, please describe it.Not really - we are using for now a 3rd party solution where all this works.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Missing components result in wrong drawings and this can result in faulty production5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)The entire production process
1. Are you using a workaround?Unavailable2. What is the use case for your organization?Multiple table cells can be selected and copied to different table cells.3. What impact does this problem currently have on your organization?The more contents you want to copy in a table and the more paste destinations you have, the more man hours it takes. Since it is possible to copy paste more than 3 pieces of the same content into more than 20 DRWs in a single operation, copy pasting one by one takes a lot of man hours. The corresponding effort for each subassembly is 0.5 hours more than previously used CAD. Since there are approximately 265 subassembly drawings for a product and the number of drawing sheets needs to be matched, 0.5h x 2 (average number of sheets in the subassembly) x 265 drawings =265h increase.Describe the Problem The contents of a single table cell can be copy pasted, but it cannot be copy pasted when multiple selections are made.The contents of a table are often used in colu
1. Are you using a workaround?no, I don't use any workarounds2. What is the use case for your organization?With our licenses we cannot use the "copy geometry" commands so we sometimes create external references and dependencies. Creo Parametric does not allow you to duplicate an assembly if dependencies are defined within it, so in this case we use the "Reference viewer" command only to view the dependencies of the children.3. What impact does this problem currently have on your organization?a few minutes, but repeating the command would be very appreciableDescribe the ProblemCurrently when I run the "Reference viewer" command, the program starts doing all its calculations and then displays all the references and dependencies, and if the assembly is complicated it takes a long time.What I suggest is to create a further command that gives the user the possibility to preset what he needs and then start the calculation.For example: I call this new command, the program opens the "Reference
1. Are you using a workaround?Yes - manual text entry / update (error prone!)2. What is the use case for your organization?Creation of "smart" documentation that updates automatically and elimination of out-of-date notes. 3. What impact does this problem currently have on your organization?Unknown; anecdotally, probably quite significant. Describe the Problem The software provides in the UI the capability to search the model database and return the list of results. However, this information is not available to be used for programmatically documenting or driving the design intent. For example, a user recently asked for a way to report how many parts are contained in an assembly (ref. thread - PARAMETER FOR NUMBER OF COMPONENTS PRESENT IN AN ASSEMBLY) The information can be obtained using the search tool. However, only a static annotation note can be manually generated with this. The proposal is a conceptual idea of a general feature that stores the search results in an accessible
1. Are you using a workaround?Currently, there is no direct PTC Toolkit API to get the tessellation of TAPE/MARKER Feature attached in Cable Harness2. What is the use case for your organization?We are using application to convert Creo data file to JT file format . Due to unavailability of any toolkit API to fetch the TAPE/MARKER tessellation , the conversion is not completed properly.3. What impact does this problem currently have on your organization?Not able to get the complete feature of Cable harness in JT File.Describe the ProblemProCableTessellationGet() does not give the tessellation for the TAPE/MARKER contain in the cable
1. about meWe are producing articles for shop equipment. I'm a developer for metal and plastic components, assemblies and part lists. Responsible for all communication with peripheral departments like production, sales, purchase and marketing. 2. softwarePTC Creo Elements Direct Modeling 20.0 including sheet metal and Phoenix PDM 11Additional Solidworks and Blender. 3. ideaPerspective 3D view in Annotation. 4. use caseNot a daily task. Some 3D views of very long or big parts look funny in this straight 3D view nowadays. 5. valueWe often make pictures for manuals or customers (pdf). Then a more realistic view could be helpful for "CAD-Foreigners".
1. Are you using a workaround?As for the pattern feature, if it is deleted once, then the feature parameter is created/changed, and then patterned again, it is reflected in the pattern all at once. However, repatterning often takes longer.2. What is the use case for your organization?Improved input efficiency for feature parameters. In particular, it is desirable that feature parameters such as patterned parts can be input and changed together. Please consider the following three improvement plans. *Methods other than the proposed three may be used. -improvement plans- (1) Apply to all by input/change to one model in the pattern. (2) Apply to all in the pattern by inputting and changing to the pattern feature itself. (3) Select multiple models to apply feature parameters to all of those selected in the batch input/change. 3. What impact does this problem currently have on your organization?The more components and the more pattern features, the more man hours it takes. For large
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?20.6 2. What is the problem?In Annotation, drawings can greated with the multi-language drawings module, in several languages.With the multi-language drawings module, the production data (PDF) is created with the set language by the user. So it can NOT be guaranteed in which language the production documents are available.3. Are you using a workaround? If yes, please describe it.We use a language module from MAIT, which was programmed for us. The language change takes place in the TaskAgent with the Drafting.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.- The use of the language module makes sense if there are several development and production sites.- One development site can create the document in its local language.- Other development sites can switch to their
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?creo 8- 2. What is the problem?in the flexibility dialog of a Part or Assy, offer pre-defined states which change DIMS, FEATURES, PARAMETERS.. ETC similar to the VIEW MANAGER's ALL tab. 3. Are you using a workaround? If yes, please describe it.setting each component's flexibility in an assy by hand..4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Components or assys in an assembly which are flexed could easily have STATES or an ALL tab with pre-defined states we can use which set parameter, dims and features all at one time.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)not much currently, but could easily replace family tabled items in the future where you do not want the extra ins
1. Are you using a workaround?Yes, you can currently change the default orientation and then click on the saved orientations and then click on the default orientation.2. What is the use case for your organization?This idea would save some training and make it easier for users to use the product out of the box.3. What impact does this problem currently have on your organization?Users get confused because they don't see the part geometry that they are expecting. Saves some clicks.Describe the Problem If you have a CSYS way off in left field then when you open a part Creo opens centered on the default CSYS which may not be where the part geometry is. By allowing the part to be opened in the default orientation it would allow users to zoom in on the geometry for the part and then always open to that orientation.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.CAD business owner for SOMFY group2. What version of Creo Parametric are you currently running?Currently CREO7 and CREO9.0.2.0 in April3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.ISO 1302 roughness symbol is native in CREO9 ... but ISO1302 is canceled and replace by ISO219204. What is the use case for your organization?Roughness symbol is used in drawing and 3D5. What business value would your suggestion represent for your organization?The new symbol of ISO21920 precise if it's linear or surface roughness.and is going to replace old symbol(ISO1302) à (ISO21920) The new line is for linear roughness ; For surface roughness, il is a losange.We create the symbol in CREO7 ; The point is unwished ; there are some options below Ra1.6, but I don't found how insert a blank as optionCould
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 10.0.0.02. What is the problem?Unable to Tie Orientations of multiple windows together in order to rotate and zoom in unison. This should be similar to Creo simulate results windows ability to Synchronize Simulation results.3. Are you using a workaround? If yes, please describe it.Most similar feature is View state compare but it has to be set up which orientation to use for each state and if you want to move at all from the chosen orientation its very difficult to make the same orientation change in the other window.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Any sort of Review between two similar parts/assemblies. Creo View Compare only works in one window and the overlap can be hard to understand more basic changes.5. What impact does this problem cur
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? CREO Parametric 9.0.6.02. What is the problem? when changing model tree width or adding columsn this is done for ALL active models. this is not helpful as I don't want these model tree changes to be reflected in all model, only in the active model.3. Are you using a workaround? If yes, please describe it. no, not possible, unless keep changing model tree settings4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.e.g. in part models you may sometime need to see Feature # and Feature ID, but not for all models. sometime you may want to see windchill information for all componants in a specific assembly, but not in all assemblies in session. in CREO 9 this differentiation is not possible anymore (in CREO 4 this was)5.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.