Recently active
I am having issues trying to open a UDF from a folder in our Windchill library.I get this error:'wtpub://PDM-PD/Libraries/COMMON CAD/CAD Documents/user defined features/90-4118-795-000' does not exist in the database.Caught exception: com.ptc.wfc.Implementation.pfcExceptions$XToolkitGeneralError When I dig into the log, it looks like it is failing here:Exception of type com.ptc.wfc.Implementation.pfcExceptions$XToolkitNotFoundXPFC Message: pfcExceptions::XToolkitNotFound...at com.ptc.wfc.Implementation.WFCRemoteCommImpl.makeObject line: 5453 If I put the UDF "90-4118-795-000" into my working directory, it executes fine and places the UDF as expected. I have tried to retrieve the UDF in a sandbox code and get the same error, so it seems it is related to .gph files?I can retrieve .prt files fine, so I am looking for any ideas on how to resolve this issue.
I'm working with my IT dept to try and install Creo View en masse and they are asking for a .msi file. Is there a way too get one? The default download on PTC Support is just the .exe in a ZIP. Has anyone done a mass install of Creo View? Any recommendations for tackling this? Trying to install V11.1
An issue was brought up last week by 2 of our users wanting to work with skeleton models. Users were reporting "Assembly license is required to use this functionality.", this was showing when trying to populate their assembly without existing skeletons. After further investigation I noticed all features of the AAX module are missing. We're not sure when this started, but has anyone noticed similar behavior? Creo+ V12.2.0.0-020Windchill+ V12.1.2.12
What is the best way to find a dimension within a family table? Is there some sort of search function that can filter through the family table? For example, if I just have a dimension 'd160', what is the fastest way to find it in a large family table.
Hello!I am trying to add a M7 ISO thread to my 3D piece but it has the wrong size. It's way tinier as what it schould be. The sizes are wrong for every ISO thread, and doesn't disappear after restarting Creo, or by creating new pieces.Im am Using Creo 8.0.4.0, and I believe the problem came once I changed the language.Thank you for your help and your time.
Hi everyone, I'm working on automating a process using a batch file that will be triggered as a scheduled task. The steps I'm trying to automate are as follows: 1- Launch Creo Parametric (version 10.0.7.0)2- Start a tool that interacts with Creo to run it automatically in the background.3- Shut down the configurator.4- Shut down Creo itself. Parts 2 and 3 are not a problem: this tool was developed by our consultants using the Creo toolkit. It's simply a matter of invoking one batch file to start it and another to stop it. The issue is with the shutdown of Creo. I don't want to use a brute-force taskkill command to close Creo, as I'd prefer a more graceful and proper way to do it. I considered simulating keyboard shortcuts (such as Alt+F+X) to close the program, using either VBScript or AutoHotkey, but here's the catch: since this task will be running as a scheduled task, with no user logged in, none of these solutions will work because they require the UI to be accessibl
I am using Creo 11.0 I have multiple Simp Rep in assembly for example S1, S2, S3 and S5. Now I am assemble one more part and create one more sim rep S6. So, S6's part automatically added in all existing representation. Now my problem is that how can I exclude S6's part from all existing easily. Thanks in advance.
Hi Folks,Using Creo 7.0.8.0In the 'Shape' sub-tab of the 'hole' modeling feature ribbon, I recall the graphic used to show the tap-drill depth. I don't see this anymore. Nonetheless, is there a way to add drill depth to the note callout properly? This is omitted and only tap-depth is shown. Thank you.
how creo 7 works in thermal analisys in a steady state ? I mean as input for thermal load i've to consider Heat Flux (W/m^2). This means that load is time dependent. I use a load of 5000W/m^ 2 on a steel structure with 30mm thicknes and i get more than 170°c of temperature. Teoric calculation give me 21 °c after 20 seconds.Does creo consider Fourier time to get Steady State: t= Thickness^2/(Thermal Diffusivity) ? and if it consider that how does it calculate that. Because in material specification ther is not thermal diffusivity value.thanks for answering
We run numerous versions of Creo (7, 10, & 11) to support various clients. The whole mapkey.pro change that PTC has made in Creo 11 has wrecked our config.pro system setup. We have a somewhat complicated setup, so without getting into that I will just explain exactly what I want to try to accomplish. I need to take the users config.pro files and separate them into 2 files; a config.pro with no mapkeys in it, and a mapkey.pro file. I need prior Creo 11 versions (specifically 7 & 10) to load the users mapkeys.pro file from the startin dir. Does anyone know a way I can achieve this? My goal is to keep all of the config.pro files neutral across all versions. I do not want to manage separate user config files for every version, this creates a admi file management nightmare for the way we have our system settings in place.
My company has been using family tables for fasteners for quite a while and we want to try to use intelligent fastener. All the family tables are stored in Windchill. Is there a way we can use those pre-existing models/family tables with IFX without causing issues across our assemblies?
Hi, Facing the same issue with Creo Illustrate 11.0 Not able to predict the output in video. Please help asap. Thanks in advance. Regards, Aditya Gupta
I would like to suggest an improvement in the Style module and have the Merge, Trim, Extend, Thicken Without a doubt, this would make things easier for users who use this feature.
Hello,I want to remove hidden lines in my half section (circled red in attached picture) but still have hidden lines activated in the remaning part of the view (circled blue in attached picture) - how can I make this happen? I'm currently on Creo 11Thankful for all the help I can get./ Andreas
How would I add this design to the curved surface of a cylinder? (Creo 8.0)
I have large assembly drawings that we show the sequence of assembly with various exploded views. We have the full BOM which is usually set to the master simple rep, this has all parts, hardware in the assembly. we also have many assembly steps which I have been making by an saved exploded view with corresponding simple rep (to hide everything not needed for that particular assembly step). Normally in the drawing I show the master rep for the view and use component display to turn off the unwanted parts. This allows me to create associated balloons to the BOM. What I want to do is find a way to create a BOM for each simple rep (exploded assembly step view) and have the item numbers the same as the full BOM (master rep). I don't know if this is possible by writing some sort of relation that looks at the part number in the master and then assigns that item number in the other BOM's of different rep's. I've done a bit of relations writing but this is outside my comfort zone. I can't help
I'm upgrading from Creo 2 to Creo 8. We use Notes in the model to make string parameters from multiple parameters and have them on different lines. And do I really need to make and place a note in the model then erase it to have this function.As I'm working through it it seems like I do but I'm open to suggestions. Thanks in advance.
Hello everyone. I am opening CEDM models in Creo Parametric. When calculating the mass properties of a mixed assembly (composed of CEDM and Creo Parametric files) I noticed that the Modeling files have the mass at 0 (PRO_MP_MASS). Is there a way to calculate it? All this without modifying the original Modeling file.Thanks to all.Bye Marco
I have added IEAC (Exclude elements autogem control) to my fixed constraint areas. Autogem mesh also reflects the IEAC control. However, in the solver output file, i still see a warning" Excluded elements may be needed near constrain". Is this normal ?
Hi, Can we import CATIA v6 files in Creo illustrate directly? If so what is the version of illustrate? Kindly help. ThanksNaresh
I am using Creo 6.0 and often have issues with these 4 sided tangent boundary blends. The error says it fails to create tangency in the corner. Is there a reason for this? I understand the bounding curves have to be tangent to neighboring surfaces, and I even experimented with making the curves tangent to the whole neighboring surface and not just the neighboring surface parting line. I have tried 3 sided boundary blends but it often got tight in 1 corner and failed.
I am using Creo Parametric Release 10.0 and Datecode10.0.5.0For hole making manufacturing sequences, for whatever reason ours defaults to all models instead of reference model. To be more clear, I'm referring to when you click on the Mill tab>Holemaking Cycles>Standard (or whatever floats your boat)>References>Details>Options...the dropdown here defaults to All Models, and I am wanting it to default to reference models, since i am setting my reference model. As you can imagine, when we go to make a new program based off of an existing one, and we remove a fixture component, it causes manufacturing sequences to fail because they are being tied to these random models instead of just to the reference model.I have searched config.pro options and the knowledge database and I'm finding nothing that can point me in the right direction on whether the default to this can be set when creating new sequences. If this does not already exist, can this be added as a config.pro option?
I am trying to run a Kinematic type analysis. I could not see the option to enable Termination Condition for the analysis in Kinematic type of analysis. How can I terminate the run after meeting a certain specified condition? Thanks!
I have a family table with a bunch of holes that cannot be patterned because they are in a family table and due to other geometry constrains, the chamfer cant be associated with each hole. Is there a way at the end of the model tree to just chamfer all holes on a surface without specifically picking edge geometry?
Hi Guys, I would like to apply a chamfer to the highlighted edge. But every time I apply the chamfer it runs along the entire circumference. How do I apply it only to one edge.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.