Recently active
Reference from topicI've been fighting with this issue for years now, in my case it was win32_gdi -- once I replace it with opengl it worked like a charm!!May I ask how does one start this Information Window, and where is this file support.inf.1 located?Thank you again Remy, you made my day!!!
Hello there,i am using creo 9.0 and vs professional 2022I want to create a full asynchronous creo toolkit application on VS professional, but i dnt know how to start in a proper way. using some online materials i have managed to create something ,1) any guide or start point to async creo application2) How to pass RPC commands and where to find it ?3) when i try to unlock using protk_unlock , i get toolkit for drawing license isnt available , but i dnt use any api regarding drawings ?4) how to generate a pfc file and use that to get all the data of the cad part from the session?sorry if all these are basic as i am new to it . i have learnt creo toolkit synchronous mode but not this
1. Describe the ProblemHello, We are currently deploying MBD methodologies. Regarding these methodologies, in some case we use the feature "move to plan" on 3D annotations displayed from skectches.When we use this feature Z-extension line are created to locate the original position of the dimension.But these lines are kept when we create a 3D PDF from the 3D model. (see attachment)It would be great to add an option to hide these lines.Thanks2. Are you using a workaround?There is no workaround for this issue.3. What is the use case for your organization?For all our MDB 3D models we can use this feature for a better understanding of the 3D PDF.4. What impact does this problem currently have on your organization?The MBD definition and the generated 3D PDF are not correctly defined and some incomprehensions could be done with the 3D PDFStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total num
Hi, you may find this question stupid.. i find out that in creo assembly, lets say i have 10 components .. when i wanted to edit the mate (say distance mate) of the 5th component, then the components 6, 7, 8, 9 and 10 hides... the problem here is when i edit the distance, i am not sure whether is it going to hit/interfere with any of components that was added after 5th .. after coming out of edit definition .. i find that it is interfering , then i have to change again .. the case is not just with editing mates, but changing mates / position and so on .. is there a way to avoid hiding of rest of components... or is it too much to ask from creo... thanks in advance ..
1. Describe the ProblemThe idea here is to give to the user the ability to turn off the active section while being active in another feature2. Are you using a workaround?very often3. What is the use case for your organization?medium4. What impact does this problem currently have on your organization?not big but frustrating...
Hi there, is there a way to declare a template for process plan assemblies? When I try to create one, "use template" is grayed out: The main problem is, that there are no pre-defined orientations, which makes it unnecessary inconvenient to create drawing from that later. I am using Creo 10.0.7.0
Hello, just wondering how the default tolerance value works at new created dimension in drawing. Since i use mostly the +- symetric - would it be possible to set the default tolerance (maybe in drawing setup file) value this way? Thanks in advance T.
Hi,we have this scenario: a notebook HP ZBOOK STUDIO 16 G10 (Microsoft Windows 11 Ent 24H2), a HP THUNDERBOLT DOCK 280W G4 and a monitor PHILIPS 273V5L. We use PTC CREO 20.6.1. The problem is this: when we open Drawing on the Philips monitor, the program crashes and closes all open programs. I attach the error that the event viewer reports. If we open Drawing on the laptop monitor, the program starts correctly. If I update the Nvidia video card driver, then the problem is solved for a while... Should I reinstall Drawing from scratch? Or should I reinstall Windows entirely? Thank you.Best regards,
1. Describe the Problem I've been mentioning this since 2001 when AI the movie came out. I want to be able to train sketcher for automatic dimensioning. Makes sense esp as engineers make specific habits or dimensioning habits 2. Are you using a workaround?Of course.3. What is the use case for your organization?Speed efficiency is the main use case.4. What impact does this problem currently have on your organization?Zero.
1. Describe the ProblemIm extremely passionate about Creo and how incredible the tool is. The development is aggressive and exciting. With that said like all of us we do have ideas for further enhancements. One of the design engine precision laptops has the RTX5000 card. Never skimp on graphics cards says one Dell industrial designer. When comparing a machine w/ RTX2000 vs RTX5000 one will notice the sketcher lines or curves are so extremally faint. It would be my suggestion to allow a UI to adjust the weight of the line type *PTC calls font incorrectly. It's great we can change the color or the line type. We need to be able to change the weight. SolidWorks lets users do preform all three. I can provide a video if necessary. Bart Brejcha designengine.com2. Are you using a workaround?Use my glasses.3. What is the use case for your organization?in surface modeling I teach participants in c
Having some trouble with flattening a small harness with 2 wires. It's a very simple harness with a connector on one end and then 2 eyelets on the other. Ideally for the drawing Id like to have each wire coming out relative to where it would on the real connector. The picture shows about as good as I can get it. Anything I try seems to screw it up in some form. Using the move segment tool works in some cases but if for example I want to move the red wire to the correct position I can move it but as soon as I confirm it it disappears from the window and in the model tree that part of the flatten harness turns red. So I delete it and have to re-flatten that section. If I try and auto fan it it makes a big mess where the cables are twisted together. I have tried using the twist command but I can't seem to get that working either. There are times where I can get the connector to look right with the wires but then there is a twist going towards the eyelets and I still
I have some large scan files from a router with many small line segments. Creo error "you are attempting to import too many entities" Suggested turning of "intent manager". I can not find intent manager and it sketcher will not import the .dxf file. If I hit Proceed, it does not import anything. Is there a work flow work around for this to get the data into sketcher?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Schematic Version 112. What is the problem?In the "Catalog Explorer, there is no option to Search The Catalog Symbols3. Are you using a workaround? If yes, please describe it.No, Workaround is not available4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We have several symbols in our Catalog, it is very difficult to expand the folder and search to find the right symbol..5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)30 users, Per day around 5 users
Creo Modelcheck has no simple functionality to check the 3D model and say if it's a solid or not. I can't believe that this check criteria is not a product specification for Creo Parametrics (see CS336589). The existing SLA_INFO checking is not working. Here the explanation from PTC: "although the model obviously has mass properties (so to say Solid YES) at the same time it sometimes cannot be fully triangulated like an ordinary solid (SLA_INFO NO)." Please vote to make the Creo Modelchecker better!👍 Thx😉
We created symbols of tables (i.e. torque table) in an mbd in Creo 8 but when we export them into a pvz file the justification of the symbol text changes from center justified to right justified so the text violates the table lines. These same files exported correctly with my old computer, but i had to get a new one and have a new config.pro. Is there a setting that controls this?
We have a requirement to highlight areas of a casting model as zoned areas, where the zoned area has specil requirements, ie cannot be repaired with welds etc. We usually do this by highlighing the areas by drawing sketches on the drawing views. We thought it might be a good idea to show these surfaces as different coloured surfaces in the 3D model so found a way on youtube, where a guy showed how to change a particular surface to transparent, then copy and paste a new surface over the transparent surface, which could then be split into 2 surfaces, with one being the colour of the original part and the other surface being coloured to a new colour to highlight a special attention area. Our current policy for casting to machined, is to take this casting model, create a new part for the machined and then merge the casting into the machined model (using Get Data > Merge/Inheritance). Unfortunately, when we then apply machined cuts to the machined part, these newl
1. Describe the ProblemWhen a hole file has been updated by the admin. The user should be notified when the edit a hole that some thing has changed. Currently, the parameters are updated without notifying the user of the change. Case 1: We want to update the Fasterner_ID to a decimal format.1) User gets a change order to change hole depth of an existing hole. Hole was 1/4-20 using the old hole file.2) User opens part, edits the definition of the hole to modify the hole depth.3) User OK's the edit4) The hole fastener ID has been updated to .073-64 hole without alerting the user. (First hole in the detail file)5) Hole information is incorrectly shown on design documents Case 2: Administrator remove a legacy hole detail file from the load Point.1) User gets a change order to change hole depth of an existing hole. Hole was 1/4-20 using the old hole file.2) User opens part, edits the definition of the hole to modify the hole depth.3) User OK's t
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 82. What is the problem?Sheetmetal part with overlapping geometry is a big problem because it can not be manufactured in one piece of sheetmetal: ModelCHECK should just run internally the "Flat Pattern Preview"3. Are you using a workaround? If yes, please describe it.Flat Pattern preview of all the parts4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.If modelcheck could give a warning about overlapping, this problem will disappear.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)I think this problem is usual in all the companies, so this will benefit everybody. (All the organizations with Creo Parametric and ModelCHECK)
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.A product design company that uses the different design stages s.a. concept/prototype/production/...2. What version of Creo Parametric are you currently running?7/83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When moving to production state , often the automatic update state get's forgotten. If parts are then not released or locked, they will be updated. In order to help detect these kind of parts, it would be helpful to let ModelCheck indicate the parts that still have copy geometry features on that state.Even better would be a tool that enables an engineer to set the status of multiple parts/features at once.4. What is the use case for your organization?Do a check on an entire assembly to see which parts would still automatically update.5. What business value would your suggestion represe
1. Describe the Problem It would be helpful if there was a way to use asterisks in ModelCHECK's configuration files, e.g. in the condition.mcc file, to call a special check profile if the model contains one or more parameters that begin with "USR_", for example. If "MODE_UPDATE" is set to "Yes" in config_init.mc and the "EXTRA_PARAMS" option in the *.mch file is also set to "Yes", all parameters that are not present in the template defined under "PRT_TEMPLATE" in the *.mcs file will be deleted. This means that all parameters added by the user will be deleted. This is dangerous because not all parameters are used by a relation and these are therefore deleted by ModelCHECK. By using an asterisk in the condition.mcc file, it could be detected whether there are multiple user-defined parameters that begin with "USR_", for example. This condition in the condition.mcc file could look like this: IF (USR_*) config=(check/mat.mch)(check/usr.mch)(start/mat_mm.mcs)(start/usr_mm.mcs)(constant/mm.mc
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 10.0.12. What is the problem?after running MC you get the detailed report. in the report it would be very beneficial to have the abilityto Redefine / Delete / Suppress or any other relevant action per result, from the report itself rather than going to the model tree search for relevant and apply the action3. Are you using a workaround? If yes, please describe it.to search for the feature in the model tree, select it and apply the command.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)~200 users. lost of productivity having the added action buttons or at least changing the behavior so selecting the warning/error willselect the feature i
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 8.0.5.02. What is the problem?We were able to extract the X , Y and Z from the OVERALL_SIZE parameter values using relations. However, the extracted parameters are String Type, but we need them as Real Number data Type. The requirement is to extract the X , Y and Z Parameters as Real Number Type.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The X,Y, Z parameter values will be transferred to Windchill CAD document Attribute and further to ERP. For Windchill and Oracle only Real Number data is acceptable for these parameters.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It is blocking the production deployment. (500+ users)
With DIR_REPORT defined in the Modelcheck settings, if the directory specified does not exist, an error is logged in mc_err.log stating that it did not have write permission to the location, and it instead dumps all the html and png files into the working directory. Idea: If the specified location does not exist, create it automatically I had to recreate this after PTC archived it since I did not provide the following critical information: 1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Space. MCAD Administrator. Engineers.2. What version of Creo Parametric are you currently running?In production, Creo 5.040. In development, Creo 7.070.3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.It's written up on top where it's easier to see.4. What is the use case for your organization?Well... when someone uses C
1. Describe the Problem given a symbol definition which has grouping and variable text. There is no functionality which allows to specify an intended symbol group name to be used in a 2D or 3D note via "&sym(SYMBOL_NAME) note text" syntax PRIOR the note placement. The specification of the grouping and variable text is achieved, after the note location is picked and the note is placed, via old Pro/Engineer 21 side menus. The idea: allow the specification of a SYMBOL_NAME to be similar to filesystem directory path. given a symbol with the name "MY_SYMBOL", with two groups "GROUP1" and "GROUP2" and variable texts VARTEXT1 and VARTEXT2 please consider this syntax: &sym(/MY_SYMBOL/GROUP1?VARTEXT1:TEXT 1?VARTEXT2:text 2) some note text which would make a note showing geometry defined by MY_SYMBOL/GROUP1, with VARTEXT1 to be set to "TEXT 1" and VARTEXT2 to be set to "text 2" and the actual note text being "some note text" 2. Are you usi
1. Describe the Problem With ModelCHECK it is possible to assign a material if no material is assigned to the part.If more than one material is available in the part, ModelCHECK will skip the test because everything is OK.For testing reasons (FEM simulation), it is sometimes normal for more than one material to be available in the part. However, if you want to release the part for production, only one material should be set “as master” and the others should be deleted. It should be possible for ModelCHECK to be able to delete all unassigned materials with a setting. 2. Are you using a workaround?There is no workaround3. What is the use case for your organization?increase data quality and avoid errors4. What impact does this problem currently have on your organization?The impact is not that big
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.