Recently active
1. Describe the ProblemCurrently it is not possible to add additional components to already patterned groups in assemblies. This limitation leads to additional effort or not proper model trees which in the end impacts the performance in Creo.2. Are you using a workaround?Either deleting the existing pattern and re-do it --> which especially when you already assigned References for MBD is a no go Or create an additional pattern --> which clutters the modeltree with features for something which could have been added to the inital pattern.3. What is the use case for your organization?During assembly of prototypes additional parts may be found to be added to existing groups4. What impact does this problem currently have on your organization?Efficiency loss, performance drop, cluttered model treesStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this
Hello PTC Community, I'm experiencing an issue on some computers where the Creo 11 embedded browser is not functioning correctly. For certain web pages (stored in the hard drive), the browser displays a completely blank white page. When I reload these pages, the correct content appears only briefly—as a quick blink—and then the page goes blank again.Here are some details about the affected systems:Operating System: Windows 11 Enterprise 23H2Creo Version: 11.0.3.0Creo Platform Agent: 1.7.395Creo 11 Platform Services: 1.3.51I have already tried clearing the cache and browsing history within the embedded browser, but the issue persists.Has anyone encountered this problem or can suggest any solutions or troubleshooting steps?I attach a screenshot of the correct rendering of the page, and the blanked one. Thank you in advance for your help!
Dear @KenFarley and @BryantMorgan, With reference to this topic! Is there a way to use Gpost to split an nc file in couple .tap-files?So that Gpost looks for time or length? I would like to use this information to export an "SET", and then let GPOST split it into different TAP-parts (every tool has then his own NCL-File). That would make the explort of CL-Files easier.. because now we have to calculate every Step one by one becuase the NC-Machines/Worker prefer it that way.
"If these anchor points are cut off by a section, the dimension won't be visible." Reference topic: Hole annotations not showing - PTC Community Is there a way to shift those anchor points to visible section?I have thread hole where one annotation (MAX) is "anchored" to axis of the hole and is visible in any cross section, but the other dimension (MIN) is visible only in correctly oriented cross section, which is not cutting off the anchor points. Is there a way how to swap the anchor points to other side of the design or is it dead end in MBD?
How can i change this values by default, i dont want chanfer and i want this value to be 180 by default and not 120. How can i do it?Creo Elements/Direct 20.2.1.0
1. Describe the Problemduring creating a curve as a copy from existing geometry user can change ends and way for measurement similar as in point on curve definition: 2. Are you using a workaround?create point before the curve copy and pick this point3. What is the use case for your organization?it speed up the creation processes4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the ProblemNot able to retrieve the information of the annotation plane & it's normal vector of a dimension which is from a feature (e.g, dimension from an extrude, revolve, etc).2. Are you using a workaround?No workaround3. What is the use case for your organization?I have part with set of features & a drawing with few 2D views of the part. I need to show the model annotation in the drawing. For example, I need to show the dimensions of a hole feature. I would like to show the dimensions with best shown 2D view. If a hole is normal to FRONT view - I need to show the diameter & location from top side surfaces in FRONT view of drawing. And hole depth dimension in TOP view. In order to do this, I need to retrieve the normal vector of the feature dimension, so that I can do some math to find the best 2D view to show the dimension. If there's any alternate workaround, then please let me know how to approach this,4. What impact does this problem currently have on you
1. Describe the Problem I dream about new functionality (similar as in UDF with reference part), when user will be able to choose a reference part during creation a new version of previous part. I mean in my mind, that user will be able to pick a reference part which will be on fly open in other window and fly in parallel after a new restored part history where user will be changing a lot and in old reference part if history will be not equal due to in new part some features can be deleted or added, so in this new functionality from time to time user will be able to adjust both histories, by set point of alignment (can be more than one). 2. Are you using a workaround?Currently I open a reference part in separate window or even on second Creo in general on second screen.3. What is the use case for your organization?only on designers during R&D normal life4. What impact does this problem currently have on your organization?only more time consumingStatus changed to: Archived 2026-07-
1. Describe the ProblemRequirement: We're currently facing a critical limitation in our sheet metal design workflow: Creo lacks native functionality to create square-to-round transitions, which are essential for hopper designs. While we've developed a workaround, it's both time-consuming and compromises accuracy. This gap is especially frustrating given our deep investment in Model Based Definition (MBD). We've spent significant time and effort building a robust MBD workflow that allows us to represent both formed and flat states within a single sheet metal model—streamlining communication between design and manufacturing.Unfortunately, because Creo doesn't support this transition geometry, we're forced to rely on Autodesk Inventor for its lofted flange feature. This dependency disrupts our goal of a unified, model-driven process and introduces inefficiencies and data fragmentation. It’s a roadblock in our journey toward full MBD adoption across the enterprise. For a company committed
1. Describe the ProblemCurrently, thickness analysis feature is, sadly, inferior to the solution provided in the tools from other vendors - and also to another tool of PTC portfolio. In most modern 3D design tools we have a full rolling ball analysis with color gradient flow indicating how thickness varies on the external surface of a part – making it easy to identify manufacturing defects: In Creo, you can only specify some limits and that’s it. The results, according to our engineers, are not good enough to assess the potential issues: As I made my research, to my surprise, I noticed that PTC owns a tool not only with a rolling ball, but also with ray method and others (gradients).This functionality (the best I’ve seen so far) is available in a tool that is in a lower tier than Creo; that is in Onshape (https://www.youtube.com/watch?v=ULI0yQIGZkU).The tweaking in functionality of the tool – easy win for PTC development team – would beto do do the following:Shoot the b
HelloI noticed that when navigating through the model, you change what you're looking at by moving the model itself instead of your perspective. Meaning: the camera is fixed, and the only thing that moves is the model.I'm looking for a way to navigate through the model (while using a spacemouse) in such a way that the model stays still, and the only thing that's moving is the camera. Think of it like the model is a building, and I'm changing what I see by flying a drone to see what I want. I've been able to approximate the functionality I'm looking for, but what throws me off the most is that the center of camera rotation is always around an object instead of around the perspective of the camera itself. I'm using Creo View 10.1 with a SpaceMouseI've tried changing my navigation mode to Catia and PTC CreoI've tried changing my view mode from orthographic to perspectiveI've tried both 3D navigation methods "as defined by the general model" and "explore"I've tried inertial spin
Hello everyone, I want to output G-code like this for swivel head 3,4,5-axis milling. For 4 and 5 axes, required G43.4 before rotary motion, and for 3 axes, G43. Can someone point me to which section in the post-processor I need to modify to achieve the required code? plz check the attached post-processor file. and creo10 mfg file..(5-AXIS SWIVEL HEAD CLEANED PROGRAM)%O0001N3 G91 G28 Z0. N4 G91 G28 X0. Y0. N5 G91 G28 B0. N6 G91 G28 C0. N7 G00 G80 G40 G49 G90 G54 N8 G00 B0.N9 G00 C0.N15 T1 M06 N16 S2387 M03 N18 G43.4 Z210.000 H1 N19 G00 X-100.000 Y-337.491 C-90. B90.N20 G00 Z-10.000N21 G00 Y-107.000N22
I am using Creo Parametric Release 8.0 and Datecode8.0.6.0Hello,when I only output Tapping sequnce's Gpost I want add the code M29 instead of M3 code.How can I do it.Thank you
Check out this video on Creo "NC Turning" from PTC Application EngineersPresenters: Lee Goodwin (Solution Consultant, Princilpal) and Ryan Butcher (Solution Consultant, Fellow)Original Date Presented: April 16, 2024 To dive deeper into the subject, check out Creo "NC Turning". (view in My Videos)
I am looking at updating our old start parts that have Pro/Intralink parameters in them which are useless now that we are in Windchill. I read the steps in Article - CS105842 - How to modify or remove Windchill Parameters in Creo Parametric but the parameters are still locked when I open the files in Creo. Any suggestions on how to get clean start parts. I have thought of creating new ones, but we have a lot of parameters that would need added. I saw an article that said ModelCheck can delete unwanted parameters, but it did not address the issue of locked parameters. Will ModelCheck remove locked parameters? Creo 10.0.4.0 and Windchill 13.0.2.0
Reference topic link @simran I also have the same problem, have you found a solution to delete the useless BASELINES?Thank you and good day.
I noticed recently ( I think it has been around awhile) that when you delete an entity that is patterned, it does not delete all the dimension of the pattern. A part is patterned: A family table is made: I renamed the dimension (distance apart and qty) to try and avoid confusion: Next I deleted the part that was patterned (which deletes the pattern too). But the family table still shows the qty (and on a different one, it didn't get rid of the dimension): Is this a glitch?
How slot car racing is turbocharging STEM education—students design, build, and race like F1 engineers using real tools in a nationwide UK challenge.
I am getting frustrated finding good tutorials for Schematics. I need to generate a Wiring Diagram(s) for a test rack. I have to generate multiple complex custom components (artifacts?) with large numbers of connections. I have done the artwork and have it in .DXF format. I have fought through and figured out how to load the DXF's into the editor, but I need how to figure out how to take the DXF and do pin assignments and make it a reusable stand alone component to put into a library for reuse. Does PTC have any online tutorial for Schematic? I am running 10.0.0. I find tutorials for some parts of this but they are years old and the instructions don't match the new rev. This ain't my first rodeo, but the inability to find instructions, or tutorials has me frustrated.
Created a sheetmetal part master view is the flat pattern. Created a simplified rep in the bent state. When we assembly the part in the 3D assembly the assembled components do not update to the bent state. We need one model to represent the component and allow the flat pattern to be used in the drawing. Our business has only 1 part number for the manufacture of this component. We do not want to create another CAD PART ---- BRAKET_FLAT.prt. This created unnecessary data in our system and complicate Windchill by dragging along unnecessary objects.
1. Describe the ProblemIt will be great to have an opportunity to return to value and direction in e.g. offset feature to previously parameters we have before enter edit definition. here is the examplewhen enter to feature offset redefinition we have this situation:but when I replace main surface to new one (here this blue):preview stop showing the solution, and I start play with offset value and direction next to see what is possible:and I realized that the direction should be flippedand here is the idea for improvement (not only for OFFSET FEATURE I think 😉 ) when user should be able to have opportunity to remind the value (new button) how it was previously and also additional checkbox to remind also the direction or not 2. Are you using a workaround?manually cancel edit definition and preview the old value and direction and then redefine once again3. What is the use case for your organization?very often4. What impact does this problem currently have on your organization?lowStatus
Hi, I use creo 11.0 edition. When I want to select plane nothing happens
Running CREO 8.0I have a section view with 2 components not showing up in view. They are there but will not appear.I have tried excluding and including back and forth in VM States tab. I even cleared out my workspace and did the work all over again it was only a (5 minutes task).. I also created the view state all over again. and nothing.See screenshot of bodies in green that will not appear.I did notice in modelling that when I try to add the parts to the section they will not select but other parts will.
My AutoCAD human resource is taking 50hrs to trace the outline of something vehicle as seen in attached file. Our client has tons of vehicle images to be converted to .drg, bypassing 3D model. I was wondering if someone has a software that can convert image to as if drawn by a engineering drafting pen. .2mm / .4mm / 1mm sharpie. Thanks for all your brainstorming. This may save us a tons. Thanks in ADVANCE! So much of Creo.. So little time.!
Finally upgraded from Creo 9 to Creo 12 and it started completely locking up the system when adding a countersink to a hole feature. Contacted tech support and they said the Dell 7760 is not supported by Creo 12! This is crazy! So now I am supposed to go and buy new laptops for the entire engineering and design team?? Looks like I either find another 3D system or I am stuck with Creo 9. I didn't upgrade to Creo 11 because they moved the mapkeys out of the config.pro to a separate file that is located on the local client. This made the CAD much more difficult because one way to standardize and control process is by using mapkeys that were loaded of the server at the start point. Not happy with PTC...
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.