Recently active
Afer activating simplify representation in model, name of this representation appears in graphics window. The same happens after actiating section, display style, layer state, explode state. Note in graphics window can become quite large. I would like to have possibility to turn off such note.
If a section is created for a model based definition model the section has to displayed as shown on the picture (acc. ISO 16792:2015 5.6). In order to fullfil the standard the designer has to manually create a sketch and a note. This should be automated by Creo. Benefit: User saves time. Display acc. to ISO standard. Example:
Hi, as of today while you import step/x_t file to creo you have two options: 1. Use Templates. in this case should the template contain density Creo ignore density coming from step/x_t file and therefor mass calculation is wrong. 2. Don't use templates. in this case Creo populate the density coming from step/x_t to file and mass calculation is correct. having the ability to decide whether to keep density coming from imported file, using import profile/config/interactive user selection, will reduce errors and simplify data exchange process.
Very often driving dimensions are converted on drawing level to ordinate dimensions. However, when converting linear driving dimensions in 2D, the disappear in the 3D model (because it is not possible to show driving ordinate dimensions in 3D - See CS212797 (See also previous product idea relating to this limitation) These dimensions are very important as they can be used for other downstream activities. For example performing a Tolerance stackup analysis. Very often they have to be recreated (driven dimensions) which is a time consuming and error prone process. See Video illustrating the problem. (function() { var wrapper = document.getElementById('lia-vid-6250648937001w960h540r161'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttri
In half views, the symmetry line is set in front by default. If the part is not rotationally symmetrical (which, strictly speaking, is the case for most of our parts and assemblies), the line of symmetry must be deselected in the view on the drawing and a centerline displayed instead.This cannot be displayed in the halfview. Current workaround: 1. Switch the half view to full view. 2. Show the axis (which is on the symmetry line) 3. Switch view to half view again. Wanted: Additional option in the half view settings for centerline.
1. Describe the ProblemCan't dual dimension individually.2. Are you using a workaround?Yes, by adding text to dimension to represent the secondary dimension.3. What is the use case for your organization?It would allow a dimension to be dual dimensioned individually instead of globally4. What impact does this problem currently have on your organization?It affects all of our Design Engineers within Carrier that need to add dual dimensions to individual dimensions.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 10.0.0.22. What is the problem?Creo does not allow to create more than one sheetmetal body within a single part3. Are you using a workaround? If yes, please describe it.I create only one SheetMetal body and the remaining Bodies as regular solid but it is not an acceptable workaround4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.It's useful for our company to have the ability to create a multibody part with more than one sheetmetal body; for eg. two bodies with formed features (such as louvers or gussets) welded together.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Great time saving.
Display “State” column in conflicts window to assist the user in making the right choice. Whe need to have more columns in the window -> Version, Description, or custom IBA.Actions on State column in conflicts window: Different cascade actions are often necessary. Actions like :1. For «Released» objects that we need to modify (example: move dim in drw), being able to do a Set state “Minor modification” and “Check out”.2. For a read only object being able to do an “Unlock and Continue”
Hello, In 2D drawings, if we select several dimensions we can move all of them simultaneously. However, in 3D annotation (MBD), we have to move the dimensions one by one. It would be very useful to have the possibility of moving all the selected dimensions simultaneously in 3D MBD, as we can do in 2D. Best regards, Amaia Azkue
1. Describe the ProblemWhen creating mirrored copies of selected features, the following regeneration options are available to manage the dependency between the original features and their mirrored copies:Partially dependent - Dimensions and AE Details only (default) : only the dimensions and annotation element details of the copied features are dependent on the original features;Fully dependent with options to vary : all the elements of the copied features are fully dependent on the original features or geometry.Until Creo Parametric 5, I have always suggested using the Fully dependent option (not default) because it allows modifying the options of the original features and changing the references in the sketcher. In fact, with the default Partially dependent option, attempting to add references to the original feature section will trigger this message, as such modifications are not allowed:Starting from Creo Parametric 5, by editing the definition of a Mirror feature is availabl
When you want to add a standard hole in your family table, you can't use the dimension in direct way.You must :Override the dimensionNote: Hole annotations will not be accurate for this workaroundAdd configuration option hole_diameter_override = yesAdd the diameter dimension symbol d# to family table using the Other at Add item type.Create multiple hole features and suppress all but the desired one for each instance.In the first case the note don't be synchronise with the dimensions and in the second you can't put a screw inside without adaptation.So it will be more easy if CREO allows us to use a parameter to choose a standard hole and after to change it with a family table.It seems it's easiest way is to drive THREAD_SERIES and SCREW_SIZE by family tableVF:Lorsque vous souhaitez ajouter un trou standard dans votre table de famille, vous ne pouvez pas utiliser la dimension de manière directe.Vous devez:Ignorer la dimensionRemarque: les annotations de trous ne seront pas précise
Hello, When working in Creo Parametric, sometimes the default naming scheme delivred by Creo can be different to the company naming rules. This creates extra work for the designers mainly doing repetitive "Rename" actions in Windchill... Example 1: in a hydraulic hose, when finalizing the routing with a "solid pipe" feature : the feature gets automatically the pipe name + 0001/0002/0003/etc... : Example 2 : Skeleton are also created with the assembly name + extra numbers (0001/0002...) All this behavior is described as work to spec in this PTC article : https://www.ptc.com/en/support/article?n=CS58009&language=en&posno=1&q=digit%20piping&source=search&source=copyurl To avoid losing time doing unnecessary renaming in Windchill, the Creo Parametric naming scheme needs to be customizable for each company! (with config option ... or another method) Thanks in advance Related PTC Ticket : CS58009
Article Reference - https://www.ptc.com/en/support/article/CS130629 Ticket Reference - 15522083 Currently, the dtl option default_bom_balloon_type will only work if the drawing is already created and the symbol is stored within the drawing file itself. This makes using custom symbols very tedious to use with a repeat region. We have to use a mapkey to bring in the table and load in the symbol at the same time. The option default_bom_balloon_type should bring it in automatically when drawings are created form formats.
In sheetmetal a user can create a bend order sequence. This means setting up a bend order sequence in the sheet metal part that can later be accessed by the drawing and displayed with Show Model Annotations to display a bend order table. In that report there is a line item referring to the number of bends. It would be very useful to have a sheet metal parameter that has the total number of bends in a sheet metal part, that can be referenced without the need to create a bend order table and manually inspect the table to report the total number of bends. Could a sheet metal parameter be added that updates automatically and lists the number of bends in a part as an integer eg. SMT_PART_BEND_QTY
Add the ability to tolerance x, y, diameter, and depth in the hole table. Add further description to the hole table so its the same as a hole callout. Make planes/holes selectable to add to the hole table. Prevent refreshing of the hole table from erasing tolerancing information Maybe just do some basic market research and see how everybody else does a hole table and copy that.
Currently, only one IMAGE is created in the PDF export from the 3D model.In order to use the MBD functionality, it is also necessary to influence the representation of the export formats.When creating the PDF from the 3D data, the same functionality should be available as in the 2D drawing like the pentable.pnt file.
Currently Creo OTK Java API does not support OpenJDK. Read CS296661 Since 2019 January, Oracle is charging for a Oracle SE subscription that cost 2.5$/user/month. I am opening this IDEA to request support. Does any developer tried to use OpenJDK even if PTC is not supporting?
In Sheetmetal unbending creates bend notes. Currently it is possible to modify: - symbol for type and direction of bend note. - add inner or outer radius - angle It is not possible to define which angle is shown in Bend Note - supplementary or complementary. It is quite simple in some other softwares. Suggestion for PTC: - Current config: smt_bend_notes_order &type&direction&angle - Modified config: smt_bend_notes_order &type&direction&angle (&type&direction&comp_angle)
The Alt key + rectangle selection functions in CreoParametric 4.0 drawing can be used to select objects other than those that can be selected in the active tab.This function is very difficult to use. Please change the function of Alt key + rectangle selection to the function that can select all like CreoParametric2.0.
Hello Community ! We have an asynchronous toolkit app developed, which have to authenticate at PDMLink. After successful authentication the program is working on several objects in batch mode. Unfortunately, there is a timeout on the server side for each session, that prevent working day & night for this program. We need a toolkit function, which gives us the possibility to check, whether the authentication is still valid or not. Please vote, thanks for support !
When "Save copy" of a 3D model as a PDF with visual visible edges or hidden edges, it should be able to influence the line thickness via the pentable.pnt
At the moment the Import Type to choose between Part OR Assembly is greyed out when import JT file in Creo Parametric. We want to be able to choose the import type between Part OR Assembly when importing a JT file in Creo Parametric as soon as possible. See article: https://www.ptc.com/en/support/article/CS295442?&language=en
When importing a STEP file from Creo using the ap_214is protocol (created with annotations), the annotations are split into individual elements. The annotations are assigned to the combined view AGZ_FRONT. The notes should not be split.
See the screenshot below, this functionality exists in other packages. The mirror feature needs an option "replace copied geom". Important notice ; the surface ID's should remain the same. The ultimate goal would be to create a family table part that can be replaced in an assembly without having reassemble any children (f.e. bolts).
This Idea is about adding a parameter that contain active simplified representation name which is used in drawing. Please vote for this functionality.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.