Recently active
1. Describe the ProblemDisabling assembled component on reference pattern seed feature is impossible.2. Are you using a workaround?Simple reps can be used to workaround in some extent.3. What is the use case for your organization?To be able to use reference patterns for example for fasteners and plugs and being able to freely disable any fastener or plug when creating product variations.4. What impact does this problem currently have on your organization?10-20 users affected. Reference patterns cannot be used effectively. Hours lost yearly around 20 hours.
I'm using Creo Distributed Batch to batch export DXF, but I found this tool will divide drawing sheet to single DXF file, how can I to export them as 1 DXF file ? My CREO version is 8.0.3.0
I am using CREO 12.4.0.0 , In the interface of CREO Installation Assistant , After following all the instructions and adding the simple license "BK800908EDSTUDENTEDUNI" and the id password the source is added and its status shows Not Suitable. what to do ?
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. We work for Schneider Electric multinational company that specializes in digital automation and energy management. My role in the organization is Mechanical Platform Solutions Architect and our stakeholders are all of our Business representatives who spoke for all company designers.2. What version of Creo Parametric are you currently running?Creo Parametric 8.0.23. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.we have a model check configured to review and mark an error if a flexible modeling feautre is present.however there are use cases where we have imported model coming from neutral files or other CAD systems and we want to apply a condition if an imported feature exists it does not mark an error if flexible modeling are founded.there is a similar functionality w
1. Describe the ProblemIn Creo Parametric it can be helpful to have a common required block of relations to drive company standard attributes or calculations. For normal relations and comments ModelCHECK will only check for the existence of a relation or comment. There is no position check. (For solve blocks ModelCHECK does understand order dependance). 2. Are you using a workaround?Manual Checking3. What is the use case for your organization?Checking of models prior to release for compliance to company standards. I want the relations to look like /*Begin Required Common RelationsCDA_CAGE_CODE=CAGE_CODE/*Comment About Contract Number Should Be BelowCONTRACT_NUMBER=CONTRACT_IDENTIFIER/*End Required Common Relations But this will pass /*Begin Required Common Relations/*Comment About Contract Number Should Be Below/*End Required Common RelationsCDA_CAGE_CODE=CAGE_CODE/*Comment About Contract Number Should Be BelowCONTRA
I am using Creo Parametric Release 4.0 and DatecodeM080Fatal Error :- Fatal Error Encountered. A Traceback has been written to C:\users\public\Documents\traceback.log Please send it to Technical Support.Here are the errors that I facedFatal Error Encountered. A Traceback has been written to C:\users\public\Documents\traceback.log Please send it to Technical Support.
Check out this video on Creo Harness Assembly by Adam Manfredonia (Creo Solutions Consultant) and Tom Quaglia (Creo Solutions Consultant). (view in My Videos)
Our target is to generate a pressure tight cover, closing the end of a hole (cover fixed by e.g. a circlip), and pressure is acting on the inner side of the cover. See Picture 1:The problem is, that as a result, the software cannot generate closed walls / a pressure tight part / even if having a load at the middle. we got only a simple result like this: Could somebody provide solution possibility (what settings we have to consider) to achive closed (pressure tight) geometry?Thanks to all of you in advance.
Does anyone know the context argument (third argument) of ProParameterTableExport using the toolkit that match looking at an assembly's parameters using the filter "Current and all assembly features and components" in Creo Parametric 10.0.4.0? I am having issues trying to get all of the parameters using PRO_PARAMTABLE_EXPORT_XML.
1. Describe the ProblemIn the Piping module, the designer specifies a minimum centerline bend radius in the line stock. However, many hose suppliers specify the minimum inside bend radius of their hose stock. There is no way to directly input inside bend radius as a requirement in the line stock.2. Are you using a workaround?The designer can add the hose's cross-section radius to the centerline radius that is specified in the line stock.3. What is the use case for your organization?The ideal solution would enable the designer to select, in the line stock menu, whether they want to specify inside bend radius or centerline bend radius.4. What impact does this problem currently have on your organization?Our organization uses the piping module for flexible hoses for several components on every engine project. Therefore, all projects in the organization are impacted. The primary impact now is that most designers specify the supplier's inside bend radius as the CL bend radius and therefore h
Check out this video on Next Generation Model Based Definition with Creo and Windchill from PTC Application Engineers & TechAzul). Presenters: Mark Nielsen (TechAzul) and Tom Quaglia (Solution Consultant, Fellow)Original Date Presented: January 09, 2025(view in My Videos)
1. Describe the ProblemWhen working with wire harness routing, we use assemblies for our connectors. These assemblies contain all of the relevant data for the connector (terminals, cavity plugs, etc.).Reference image.If I need to move a connector assembly, there's no option to specifically select an assembly. I first must select a component of the assembly and then navigate to the model tree where I can then select the complete assembly. 2. Are you using a workaround?The only workaround is to use multiple mouse clicks to first select the part, then navigate to the model tree and select the assembly.3. What is the use case for your organization?My idea would place "Assembly" as an option in the dropdown menu. Selecting assembly would then automatically select the entire connector assembly, rather than just a component of the connector assembly.4. What impact does this problem currently have on your organization?This has minimal impact, but would be a really nice addition to make my d
1. Describe the ProblemAnnotation orientation cannot be selected prior to placing GD&T Advisor annotations. If the user desires to have the annotation displayed on a different plane/different orientation than the default, they must manually edit the annotation and move to the desired plane.2. Are you using a workaround?Yes- manually redefining the annotation to preferred orientation after creating it in GD&T advisor.3. What is the use case for your organization?After selecting the feature you want to annotate in GD&T advisor, there would be an additional tab in the ribbon that would allow you to select the orientation plane for your new orientation.4. What impact does this problem currently have on your organization?Slows down designers by making them perform additional operations while creating parts.Status changed to: ArchivedHello,We are archiving your idea as part of a general review. This action is based on the age of your idea and the total number of votes received, a
要麻煩貴司協助將R角變形的面修順,我該如何做呢? 能否請負責AUO的貴司同仁聯絡我
Hi everyone,I’m working in Creo Parametric 12 and I want to make hidden lines in my drawings more visible(you can see in photo 1 how it's now). Specifically, I want:Dashed segments to be longerLines to appear clearer for printing and on-screen viewingI think i have to add a line to my drawing settings but i don't know which one. Could you please advise how to achieve this?Thank you
Creo is managed by our company with some standard settings. Every time we open Creo the config.pro and the mapkeys in the run directory are overwritten with our companies default settings. I have added in my user level config.pro and system colors, but am having trouble doing the same with the mapkeys. I followed the instruction in the support documentation, but when I click find in the config.pro and search for "load_mapkeys_run_dir" it doesn't exist so I cannot change the setting to pull from the designated location outside of the run directory.
I want to create a toolkit application that can integrate PowerPoint into Creo. Basically, I would like my application to generate a PowerPoint with information about the assembly and part views and parameter information. Is there any library that could do this integration?
We have a lot of customers that are using Creo Elements Direct Modeling and are working on projects with an architectural background. A lot of customers need to place their machines in a building and this building is delivered in IFC file format. Some of these architects also need to receive an IFC file back. Please make this an enhancement for the following version(s) because this is really needed by a lot of our customers.
1. Describe the ProblemAnnotation orientation cannot be selected prior to placing GD&T Advisor annotations. They require post-processing of setting orientations if GD&T Advisor defaults to an orientation that doesn't work for our All combined state.2. Are you using a workaround?Yes- manually redefining the annotation to preferred orientation after creating it in GD&T Advisor.3. What is the use case for your organization?After selecting the feature you want to annotate in GD&T advisor, there would be an additional tab in the ribbon that would allow you to select the orientation plane for your new annotation.4. What impact does this problem currently have on your organization?Slows down designers by making them perform additional operations while creating parts.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illlustrate 11.12. What is the problem?Decals and textures cannot be animated3. Are you using a workaround? If yes, please describe it.None4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We make machines with hydro-pneumatic pipes. It would be really interesting the possibility to animate decals and/or textures in order to represent the flow of the fluid inside the pipes5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)not applicable
I am using Creo Parametric Release N/A and DatecodeN/AHello we bought a new locked license for Creo Design Essentials but i cant find the program on the download PRODUCTSCan you please help me i send me a link to download the earlier versionregards
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1.0 and CreoView 10-1-02. What is the problem?End-users wants to start with CreoView Lite and when needed toggle to MCAD without the need to restart CreoView. Consider a company with around 11500 end usersConsider 2 packages in this company: one for CreoView LITE and one for CreoView MCAD 2/3 of users applied for CreoView MCAD1/3 of users applied for CreoView LITESometimes, MCAD users just need to visualize small parts, in which case LITE would suffice.Sometimes, LITE users need to change the color of a component, in which case they need MCAD.Given the large number of CreoView users, CreoView MCAD is dedicated to some activities. (licenses) Scenario 1: CreoView LITE user.- user needs to visualize a small 3D model to verify something.- when geometry is loaded, he needs to highlight some items and create an annotation that is kept in Wind
The edges of this part change color between views: they are BLACK in the "Shading With Edges" view and become BLUE in the "No Hidden" view. The edges are also BLUE in the Hidden Line view (with the hidden line correctly displayed as light grey), and completely blue in the Wireframe view. I would like to keep the edges BLACK no matter what, and if that is not possible, at least I would like the edges to be BLACK in the "No Hidden" view and whatever in the other views.I have played with the color settings for two days now, and I could NOT find the culprit among them.In my config.pro file I have:color yesgraphics openglenable_fsaa 16spin_with_silhouettes yesdisplay_shilhouette_edges yestangent_edge_display solidedge_display_quality very_highshade_quality 50skip_small_surfaces noset antialiasing mode onsmooth_lines yesWhat can I do in this situation? Any ideas appreciated!
Is it possible to redefine default coordinate system Inability to redefine default coordinate system and change orientation
1. Describe the Problem Please provide a dark mode option for Creo View which is settable by the users themselves. 2. Are you using a workaround?No known workaround, as https://www.youtube.com/watch?v=CpX8gOFLevY only works for Creo Parametric3. What is the use case for your organization?Increase of user acceptance4. What impact does this problem currently have on your organization?Lack of user acceptance after switch from 3D Access to Creo View due to Windchill Introduction
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.