Recently active
i know there is a api in toolkit to get a component's transformation matrix, like ProAsmcomppathTrfGet(). but as far as i know, the assembly component path is related with current assembly or current model in toolkit.how about i want to get a component's transformation matrix relatively to its parent assembly not current assembly.for example, there is a assembly A, it has a component B who has a component C. instead of using ProAsmcomppathTrfGet() to get path for C to A, i want to get the transformation matrix for C to B.is it possible to do so? can anyone show me a sample codes? many thanks.
Hi, Lets say I'm running an interference check on a large assembly, or saving PDFs of my 200 page drawing...something that takes time for Creo to process. I used to be able to open another session of Creo to work on other things, while the first was thinking... but now that we moved up to Creo 11, I am no longer able to do this. I have to wait till the first session of Creo is complete before using another session. Is there a config setting I should be looking to change? I know in Creo 3 it had something to do with the embedded browser in Creo, Figured I would ask here first before making another ticket to PTC.
Good afternoon i'm using a creo parametric 11 version, i'm trying for my drawing to populate the "code nr." and some other parameter as shown below automatically.For example a code can be "202500001_11" i want to manually apply che 202500001 code only on the main .asm parameter and use the same code also in all the .prt drawing on the repeat region.Actually i write this code on the relation of all the .prtDESCRIZIONE_ORDINE=DESCRIZIONE_ORDINE:1NOME_PARTICOLARE=rel_model_nameDISEGNATO=DISEGNATO:1ORDINE=ORDINE:1CODICE=CODICE:1DATA_CREAZIONE=DATA_CREAZIONE:1QNT=QNT:1And it works, but i cannot save this code in the start part of the .prt because of that ":1" that refer to the .asm and it does not exist in the new .prt.for the "_11" i'm using matching code like this and it workd perfectly also on the start part IF rel_model_name=="CAV_M"NR_PARTE="_11M"Can someone help me with the main code ?Thank you for your time and help.
Is there a better way to create tab and slot plate connections than manually drawing every line? I hope there is some technique where a tab can be replicated arrayed and then slots automated in the mating part. Boolean cut works but with this I don't have the option for clearance or dog bones.
How do I embed a decal so anyone (including myself) who opens the part with the decal will see it without them having to do anything.
Hello, Whenever I print to pdf, the point constraints result plot lose part of its resolution, making them close to unreadable. Is there a way to increase the font size of those particular fonts bigger? I have tried playing around with these config parameters with no luck: default_ui_font 10text_height_factor 40.000000model_tree_font 10
I'm trying to make a custom symbol that will act as a bubble number. We want to be able to have the number inside the bubble count up by one from its last iteration. The number in the bubble would need to be a variable text so we can always modify the number, and have it count up from the number input if the symbol is repeated from that iteration.EX: I use my custom symbol to put a bubble on the drawing and change the number to 10. When right clicking on the "10" bubble and repeating the symbol, it should give me a bubble with the number 11 in it. Is this something that would require the drawing to have custom parameters that calculate the last value and uses an equation to work? Is this possible to apply also to the repeat mode when putting the symbol on the drawing?
Reference from this topic. Hi, we are using netskope and recently came across a situation where all the users using netskope could not connect to license server or rather they could not get a license. The other users within the company network could get their licenses. How were you able to resolve your mentioned issue ?
In CREO cabling I have 8 cables going to one location in a flat grouping.Is there any way to re-organize the order of each wire in a flat grouping at a location? For example, in the images below I would like the red and black wire to stay in the same order as they come on the right.The final result I'm looking for is pink on top, then green, red, blue, black, white, light blue, white.This would be accomplished by moving red down 2 spots and black down 4 spots in the flat group. Then it wouldn't look like all the wires are crossing over each other. Using CREO 8.0.0.0 on Windows 11.
I am using Creo Parametric Release 7.0 and Datecode7.0.9.0From one day to the next, the path for "pro_format_dir" and "start_model_dir" which are properly configured do not seem to work anymore.When starting a new part or assembly, it does not provide our start model.Same thing for the drawing, does not list our format.Here are the errors that I facedNo error, it simply does not bring our custom start_model and format
Is there something in Options I am missing or I have to create a separate feature to open it? See Attach. ...Thanks in advance. ---------------------------------------------------------------------Always finding hidden gems in Creo!
I am using Creo Parametric Release 12.4 and Datecode12.4.1.0Hello, I use Creo Parametric and the composite module.I am exporting to .nas and would like to know how to control the ID for:- PCOMPG properties- Ply propertiesThank you
I am using Creo Parametric Release 12.4 and Datecode12.4.1.0Hello, I use Creo Parametric and the composite module. We want to export the laminate defined in Creo Composite to .nas, and we can have two types of export: (.nas + .iges) or .h5. Neither of these two solutions allows us to output a .nas in IGS with the correct properties directly integrated. Is there a way to link the .nas properties with a step or IGS? Furthermore, the exported mesh is very poor; are there parameters that exist to improve it? Thank you in advance.
While trying to export .asm in to IGES getting error as '" iges data base overflow'.Anyone have thoughts on this.....thank you in advance
ARCA Dynamics is transforming space safety with AI-powered satellites, offering real-time tracking to prevent collisions and protect vital services in low Earth orbit.
1. Describe the ProblemWhen working with large assemblies, it is easy to perform a search operation that exceeds 14000 items. Creo currently just gives you that subset and there is no way to find the additional items above this. User has to resort to starting from lower level subassemblies to reduce each individual search action. This limit applies to searching for anything.I am running into this repeatedly for large assemblies transferred into Windchill from Elements Direct when I search for coordinate systems. I need to hide all the crazy coordinate systems that come over unhidden, but if I cannot find them all in one shot, this process becomes tedious.2. Are you using a workaround?Work around is to select all the first level subassemblies, one at a time and search those separately. For particularly large subassemblies, even those might run into the 14000 object limit and going a level deeper is needed.3. What is the use case for your organization?After checking a large Elements
Hi everyone,I'm currently working on a project in Creo 12 where I want to use pro program to optimize and partially automate the design. For this, I would need to be able to automatically generate different amount of datum planes depending on the input and I need to place components in the assembly contrained by those planes. Is their a way of doing this in pro program? If Yes, can someone tell me how. It would help a lot.
Hello, I want to connect my windchill account with my creo 7, However it shows error: - 715db4df-2d3f-48b1-a37c-76142da3116c - 8fd84892-af44-4065-8653-7c673a6ee021 everytime I open creo, and show nothing after selecting: File>Manage Session>Server Management. Is there anything I can do to solve this problem? Kind regards, TC
Hello Community,I am working with Creo Toolkit and exploring three different methods of application creation:Asynchronous MethodI am using the API ProEngineerConnect() which refers to the library pt_asynchronous.lib.Even though I have included this library under Linker → General → Additional Library Directories, I am getting the following compile-time error:identifier "ProEngineerConnect" is undefinedMultiprocess MethodWhen I use the generated DLL in another C# WinForms application, I encounter this runtime error:Unable to load DLL "DLLNAME.dll" or one of its dependencies: The specified module could not be found. (0x8007007E)Could anyone help me understand:Why is ProEngineerConnect() not recognized even after linking the correct library?What could be causing the DLL load failure in the C# application?Are there any best practices or additional steps for setting up asynchronous and multiprocess methods in Creo Toolkit?Any guidance or examples would be greatly appreciated.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?More CV versions2. What is the problem?When I report installed version of Creo View on hundreds of client workstations getting wrong version info.Control Panel/Installed SW shows that Creo View version is installed as version 12 but column "Version" shows 19. What I get when reporting is that nonsense with version 19.Funny is that Creo versions are correct. Why PTC cannot keep the same logic for Creo View as well?3. Are you using a workaround? If yes, please describe it.Have to decode that "CV 6" is version 13 and "CV 12" is version 19 for example.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Getting confusing info during SW updates.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Wasting of time.
Hello everyone, We use Creo10.0.I am able to export a DWG but certain parts of the drawing are missing. e.g. the title block.Does someone know a solution. maybe it is relate to me using CCpfcDWG3DExportInstructions but no other instrutions i tested deliver a openable DWG. public static string ExportToDwg(string inputFilePath) { if (string.IsNullOrWhiteSpace(inputFilePath)) throw new ArgumentNullException(nameof(inputFilePath), "No input file path provided."); if (!System.IO.File.Exists(inputFilePath)) throw new ArgumentException($"File path does not exist: {inputFilePath}"); Interop interop = new Interop(); IpfcAsyncConnection connection = interop.Connection; if (connection == null) throw new Exception("Invalid Creo connection."); FileInformation fileInfo = new FileInformation(inputFilePath); IpfcBaseSession session = interop.Session; Interop.ClearSessionCache(session); session.ChangeDirectory(fileInfo.directory); // Apply DWG Settings Interop.ApplySettign
Hello folks,I'm a new user for Creo Schematics (specifically using Schematics Lite 12.0) and I've been trying to modify the sample catalog into a broader Template for my org to use, but I'm having trouble actually saving the Template file such that any of my changes actually stick. My workflow is as follows:Open an instance of Schematics and load in the sample catalog. Delete the provided design explorer sheets.Modify the sheets in Catalog Explorer (simply swap the PTC logo and address for my company's on the A3 sheet, for example)Save As to an RSDT file.Having done that I would expect that when I open a file and point to this newly created Template, the A3 sheet should have the logo and address but it doesn't.What exactly am I doing wrong? The documentation on Schematics is sparse.... Cheers,Boris
I just installed Creo Parametric Educational Edition 11.0.0.0. I am getting a black drawing screen. I am using a laptop (Specs- 12th gen i7 & Nvidia Geforce RTX 3050Ti)
Good afternoon i'm using Creo parametric 11 with the intelligent fastner lite version.I would like to know if it possibile to modify or add some screw starting from the template for have my personal codification.Thank you for your time and help.
1. Describe the ProblemIn a drawing that details more than one model, such as an assembly with two configurations, the repeat region cannot handle it, with two major disabilities and one minor.No BOM balloons. According to CS102227 you cannot create BOM Balloons for a repeat region using column models. You have to create them by hand, and then they are not parametric.No bulk items. The quantity for bulk items is shown as 1. You cannot alter it with relations and show it as "AR" (As Required), you have to place a note over the 1 to hide it in the R. This is the kind of fakery that we are trying to avoid and should not rely on as a best practice.Adding columns on the edge of a repeat region puts them outside the repeat region. You have to add them inside the edge column, which makes expanding an existing table unnecessarily complicated.Here's an example. But in this example, the workaround chosen was to add a dumb text column to the left of the repeat region, and several more rows of dum
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.