Recently active
We often turned off datum display since many planes are required to be created in modeling and also all the parts have some default planes. However When we select the plane in model tree, if the planes will highlight in the model graphical section too, then turning on datum display is not required. It would be helpful.
Allow Pro E/Creo to remember column widths set in various screens; if working with a family table, remember column widths from previous access so I don't have to keep re-sizing the columns to see the full value in the cell.
With Creo 2.0, some handles have disappeared of certain 2D elements like dimensions and witness lines (still OK for notes moves).The handles have been replaced by combining moves and SHIFT and/or CTRL and/or ALT or other right click actions (create witness line for example).We have lost the visual possibilities of modifications like in Creo/Elements Pro 5.0 drawings.We would very much appreciate to have ALL the 2D handles back in Creo 2.0.SHIFT manipulation can be maintained for “usual” horizontal or vertical (and 45°) moves.
Since Creo 2.0, the way to move horizontally a dimension and a note is different - for the dimension, SHIFT button need to be used - for the note, dragger need to be used This is very disturbing for the user. The note and dimension should be moved in the same way The best solution should be to have the possibility to use either the SHIFT button or either the dragger for note and dimension
In larger assemblies would be nice, if there would be an option to select few parts an then hide all unselected parts(or like in simp rep. revert selection). For example: You select 3 out of 300 parts and hide all 297 parts.Cheers,Bojan
Our tech pubs and service people hate the fact that the figures can't be dragged and dropped to represent the actual order of operations.
Customer wish to re-order Figures in Creo Illustrate. He need to move Figure 2 to the last Figure and so on.
Duplicate, Rename and Delete are very close, add a confirmation button for delete. Is very easy that users make mistakes. Undo button doesn't work in this case.
When in a part model there are many instances when it is necessary to change a part model that was inserted into it.The only way that I see this possible at this point is to delete the original inserted inheritance model and bring in a new model.It almost looks like you should be able to do this, but you can't.The pattern of replacement should be1) Edit Definition; to modify the inserted part2) Select No when prompted to retrieve the existing model3) There is a select a model prompt which you can browse to the appropriate model location4) If you replace the existing name with a * the needed model appears.5) When selecting OPEN the replacement action failsIf I understand correctly this does work when replacing Family Table parts.I would like to be able to do a merge replacement for all part models.
Currently one can create a nice set of annotations with Creo Parametric 2.0 which can be published to Creo View. This functionality can be used to create 3D drawings which streamline design process and simplify data management. Data distribution (deliverables and application) can be arranged via Windchill till shop floor level. When one creates annotation sets for sheet metal structure, there is a need for formed and flat states (bend and unbend) of geometry with supporting annotations for manufacturing. This can be done either via simplified representations or Family Tables. Later one is not an solution since it really does not simplify data management in PDM. Therefore a support for part level simplified reps in Creo View is needed.
In very large assemblies finding your way around the model tree can be painfull. The coloring is helpful for sure but it would be even better if you could just RMB/Zoom to on a component. Also if you had items in the selection buffer you could RMB/Zoom to to resize the screen to those selections.
Have the ability to set a tree.cfg option that sets the width of the first column in the model tree. I have so many feature names and parts names that exceed the default width, and switching windows from part to part or assembly resets the column width to the default.
Be able to define a 1:1 screen Zoom of 3D models to physically measure the model on the screen.It is possible to print a 3D model in 1:1 scale but when often need to show our 3D models (watches) on the screen in real 1:1 dimension.It is very important for us to see them at the right 1:1 scale. In Rhino, it is possible to calibrate the 1:1 Zoom by measuring a stallion.
The value of character limit (80) is too low, because we need more characters than 80 to add new article numbers on our drawing.We would prefer to make this value free of any limit.
At the top of the Creo ModelCHECK Report window (attached screenshot), Error is indicated by a red symbol. Users are not allowed/not able to check-in the object. But further down, it says Parameter Error (for instance), with the warning symbol. Not so intuitive. Not all Errors and Warnings are expanded in the ModelCHECK report window. In this example, the Errors aren’t that visible to the users as it should if the tab was expanded.
The weld symbol in Creo Elements/Direct Modeling is a legacy symbol. Is it possible to update this one so as norm EN ISO 2553 describes?
Hello, ModelCHECK is not optimal to use for assembly components checks and corrections. Explanation : End-users are always complaining that modelcheck (interactive or regen) only shows results for top level assembly (not for its components) in the first result screen. Example : Assembly "Test_Assembly.asm" is containing "Test_part.prt", both of them in my MC configuration should show "LAYER_MOVE" check as they both have layers with old names : - When i launch Modelcheck interactif => All levels , the first screen only shows results for the main assembly (test_assembly.asm) : - If i want to see/correct the components, i need to add 3 more clics (asm models => then choose the parts => then launch the MC correction), and this has to be done for all the components one by one (time consuming!) : Can you please allow the possibility for choosing what to correct (Assembly AND/OR Components) directly in the first result page, this will s
Today the handling of hoses (flexible pipes) is very poor in specification driven mode.Please make some enhancements, i. e.:Possibility to route two or more hoses based on another hose (tangential touching for package of hoses):Possibility to change the routing direction of a segment:Possibility to create a straight "pipeline", but then use angled fittings at the ends:
When using File > Save Current View As > Save as 2D Vector File, the .CGM format is the only format that includes Markups for a drawing. Please add the capability to include markups in PDF files as well when using the Save as 2D Vector File. The print to PDF does not suffice as it flattens the drawing to an image making the PDF look like it is very poor quality.
For the moment, if you use a drawing template, you can't select the default simplified representation.The only two possibilities are: - Create a view in the drawing template --> not very useful if you want use the template for lot of different drawings - Add the model in a empty DRW to select the good representation --> no drawing templateIt would be nice if we can simply define a default simplified representation for a drawing template !
when placing a 3D symbol in an illustration, I would like to define the assembled or positionned position as a fixed position! this option exists in PTC CREO VIEW, and if you can add it in ILLUSTRATE, that would help a lot: if (by mistake) I press the "restore all componants position", I'm able to replace the symbols again... PTC CREO VIEW button (in french) I need in ILLUSTRATE:
When threaded holes are created in a part (ref.prt), 3D annotations are automatically created and are displayed in graphics zone.So, it is possible to create a ruled layer Notes_By_Hole (#Note by #Feature type #Hole). When this layer is hided, annotations are not displayedIn a second part (inh.prt), with inheritance of the first (ref.prt), annotations of holes are displayed => layer Notes_By_Holes is emptyIt is necessary that 3D annotations coming from threaded hole behave like other references (like axis in this example, with layer Axis_By_Hole)Workaround: MBD – Inheritance option to not copy all 3DNote
Currently, up to Creo Parametric 1.0, you can't add bulk items to simplified reps. This could be a simple but nice enhancement.
Currently the setting Continue is the default setting when the save operation encounters parts that Creo Parametric thinks need to be modified upon regeneration. "Make read only" is not available as a default setting. PTC, please allow "Make read only to be set as default. Also, fix the failure on save problem when objects are marked as read only on the fly. Reference: Setting the value of "Make read only" as a configs option for dm_checkout_on_the_fly in Creo Parametric https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS44903&art_lang=en&posno=2&q=%22make%20read%20only%22&source=s… Saving issue Solved: saving issue - PTC Community Creo Elements/Pro fails to save when components are set to "Read only" during save operation https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=10183831 Save in Pro/ENGINEER fails when objects are set to Read Only during save operation https://support.ptc.com/apps/case_logger_v
For Pro/E Wildfire 4.0 and Creo Elements/Pro 5.0 (and maybe even older releases), there were these documents "Getting Started Guides" (mobile phone tutorial) available:Getting Started with Pro/ENGINEER Wildfire 4.0 - A Tutorial-based Guide to WorkflowGetting Started with Creo Elements/Pro - A Tutorial-based Guide to WorkflowSince Creo Parametric 1.0 this guide isn't available anymore. This is really a pity, because it was a very good tutorial to get an overview how parametric modelling and design is working and the three main areas part modelling, assembly and drawing creation were covered quite well.In our company we efficiently used this tutorial to train new users!But as the user interface of Creo Parametric has changed a lot, the old tutorial is applicable for the new releases only very limited.PTC, please re-introduce the "Getting Started Guide" for Creo Parametric!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.