Recently active
Is there a way to update the description text in the Sequence feature? Such as font size, color, etc.
I am using Creo Parametric Release 6.0 and Datecode6.0.3.0Creo language in Italian languageThe italian language has been installed, I've tried with ENV=PRO_LANG=Italian both in the parametric.psf and Set in the system variabile but none of that id workingThank you
Dear friends, How to create new csys at "Top_assy.asm" , which same location and orientation of "A" csys, but it should be reference with "Main" csys, not "A" csys. PS: "A" csys & "Main" csys, reference handle already with me Thanks.
Hello, I want to generate a square Image of 1000x1000 pixel from Creo Rendering. Currently the images generated are in Rectangular format (500x1000).Also is there a way to change drawing window size width through config file ? Thanks in Advance…..
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? CREO PARAMETRIC 9.0.7.02. What is the problem? We have hand drawn wirelist schematics on a page of a cable drawing to show how a cable is hooked up. It is not a CREO schematic program it is only lines on a page depicting wires in a cable with connections to connectors on each end of a wire. There is text on the drawing that indicates wire numbers and signal/net name and AWG of wire. The text is not intelligently linked to the drawn lines depicting wires in the cable. I want to automatically pull off the information off of the drawing and determine from the drawn lines where the signal/net names go from point to point (connectors) from the graphical drawing. We currently cannot just pull off data from a CREO drawing like this and put the data in any kind of format like a table that represent the layout on the drawing. We als
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?creo schematics 102. What is the problem?when dropping a report table on the drawing, the lines between cells are not there by default3. Are you using a workaround? If yes, please describe it.very clumsy workaround for setting those lines up. not intuitive at all4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.a newer user might take about 15-20 min trying to figure this out. it's rather clumsy5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) Not much, but newer users will expect these tables to have the lines
Hello, We have an application in Java to check, before saving a model in CREO, if a higher version of the model exists, preventing saving in case it exists. It works for the active model. But if the active model is an assembly, and if a component has been modified, when saving the assembly, it checks the assembly’s version, but doesn’t control the versions of the components. I would like to know how to control the components’ versions. This is what we use for the model: import com.ptc.pfc.pfcGlobal.pfcGlobal;import com.ptc.pfc.pfcModel.Model;import com.ptc.pfc.pfcSession.Session;Session curSession = pfcGlobal.GetProESession();Model model = curSession.GetCurrentModel(); Best regards,Amaia
Sombody had the same problem?When the PVZ is done, the straight cable segments not appear (curved cable segments appear),i tried to add this sentence into recipe: adapter/convCables=1; then, setting a master representation of the cable;then, giving a black color (in case of unwanted transparence);and creating a new layer adding the cable (created using "cabling" application) as show and later as isolate; in Creo all is ok...but, when the pvz is created only the straight cable sections are missing.Do you know why this could be happening? Regards (I using CREO 😎
Im trying to round the inner bottom edges of this tank. It has this small pipe leading out. When I apply round to it. It opens on either side of my pipe. How do I not have this? It doesnt show the holes in the preview but when I click accept it does. Im on creo 10.
I’m encountering a challenge where I need to filter out all assemblies with the exception of certain ones.Typically, I use the command "&asm.mbr.type != ASSEMBLY" to filter out assemblies, but now I need to modify this to exclude specific assemblies such as F902355, a5879, etc.Using Creo 8.
hello,i have a question: i have one big assembly assembled two times in another assembly. if i choose a MasterRep for one of the file in the first assembly there is no problem but if i add the second one in a group and do the same thing then the occupied memory goes up as if it were loading the whole assembly.have you had the same behaviour?thanks
I am using Creo Parametric Release 6.0 and Datecode6.0.4.0How to Export Creo part to Step files silently using command prompt window
Hi everyone, can anyone help me with SmartAssembly.I want to create a direction pattern of a component. Here's the code I wrote but it doesn't workand here is the error: thank you in advance
Hello! Is it strongly adviced to NOT make a drawing in Creo 9 of an assembly made in Catia v5? I'm making an component for a client. The component consists of two sheet metal plates that are cut and welded together and then applied a gasket. An assembly in Catia contains solids and surfaces that represent the plates and welding paths. I modeled the components in Catia v5 r28 and the customer uses Creo 9. Then I made a preliminary test of the question above by1. Export a stepfile of the assembly,2. Open step with creo and save the assembly and parts as creo asm and parts. 3. Open creo assembly and designate a top view and front view in the assembly. Create simplified representations of the assembly (cutting process of each plate, welding process, gasketing process) 4. Create a drawing and made a sheet for welding and a sheet for cutting of one plate with their respective simp representations. 5. Dimension the views. I put an outer dim
Dear all, I am running into the strangest problem: for some reason in Creo 8.0.5.0, when I double-click a dimension in the Sketcher, I cannot edit it any more. The text input appears but disappears instantly again. Only when I am very, very fast in entering a new number, I can edit the dimension. There is no apparent reason why this happens, it started all of a sudden. Running in win32_gdi-mode, and re-installing Creo did not help. Has this been seen before?
Would like bounding box size option within the analysis feature. Must have ability to create parameters for each of the 3 distances example: (height, width & length). Would be nice if it could tell the difference between if the geometry was rectangular or round. If round provide parameters diameter & length. The evaluation needs to be able to evaluate simplified rep of part and/or assembly. Use case: The parameters within the analysis could be used to establish bill of material parameters (part size for raw material purchases). Assembly level can be used to establish packaging size requirements.
Hello everyone, I am using schematics 7.0 as a ECAD and I have already an existing design where I would like to update datatables (picture 1) which are already in the central catalog. Also in the design I use a variable connector which is also in central catalog. At this connector I assigned default dataset (the one I would like to update) The question is how to proceed now? I would like to keep the variable connector, only update the dataset. I tried to move with the files in central catalog folder but nothing is working. I can of course create a new dataset and delete the previous one from central catalogue, but then I will lost the connection with the variable connector (picture 2). I saw on PTC help website that there should be administrator and editor, but I did not get how could I become one.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 102. What is the problem?Normally users open the part models from the assembly. ( Assembly- graphics screen- Open or Model tree open) . When user close the part, Creo session will never goes back to the assembly ( from where it opened from) instead it always show another model which is already open3. Are you using a workaround? If yes, please describe it.Of course we can look for the assembly but its annoying. Users expect when they close the model creo will show the assembly from which they opened seconds before. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.This is happens always in Creo and this nice enhancement would be a time saving for every users around the world. Sometimes frustrating for everyday users5. What impact does this problem currently have on y
Sometimes we need blank the border lines of table, but for current functionality Line Display only can blank the internal lines of table, cannot blank the exterior border lines
When using an inset on a part and this part is assembled in an other orientation than the main CYS, one is not able to set the part within the inset to a isometric view according to its own CYS. The idea is to implement the functionality that the part within an inset can be set to isometric orientation according to its own CYS, so you don't have to rotate it manually.
My engineering department needs PTC to add the functionality to import Parasolid files into Creo Illustrate.
This is presently called cross sheet graphics. When rearranging items in a wiring diagram, it is frequently helpful for clarity to break the line representing the fiber and sometimes to reconnect them if the ends have been moved to the same sheet. The operation of breaking the fiber is automatic if one end is moved to a different sheet. However, if the fiber to be broken has both ends on the same sheet, you must disconnect one end, use the Extend Across Sheets command and connect the new end to where the one was removed. In order to reconnect fibers, you must completely delete the fiber and reroute it, including re-entering its data set. Simple "break" and "connect" processes would make this a lot easier to create automotive style function based hybrid schematics.
Article CS262259 In Creo Illustrate 6.0 ptc removed the support for Windchill Workgroup Manager. We can use only Direct Connection now. I tested some hours this connection and I think that It's a big regression. Our users add in the workspace Illustration sources to import. They add in the workspace c3di and illustration sources to change. With Direct Connection they can't use the Windchill Search, they have to browse Windchill folder (where there are thousands of files) seeing only the file name and not other info like number, name, ibas). In my tests the checkin misses the relation with the illustration source...then I can't see if the source was updated... For us this feature (Direct connection) is not usable and not acceptable. I'm asking to review this change asap or we will use 5.1 until supported and then we will think to change software for illustrations. Thanks Nicola P.S.: I tried to open a case without success (C15160287)
Whenever multiple users are trying to edit a markup, Windchill locks the markup to the first user that opens it up. Currently there is no way for end users to find out who has it locked. (Even the content panel in Windchill does not show who has it locked under the "locked by" column as this is more of a soft lock from just opening up the markup) It would be nice if the dialogue that shows "Markup object "123.drw" is locked by another user" would instead show "Markup object "123.drw" is locked by username". This way users can contact each other directly instead of submitting work orders to local support. It would also be good if Creo View indicated a lock icon and the ability to unlock from a dropdown/menu button for the user who has it locked. And if the user unlocks and its locked by another, Creo View should grey out Markup functionality with an indicator that the file is locked by another user. What happens is users creates a bunch of markups and tries to save just to
Add more than one guideline to an annotation
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.