Recently active
I am using Creo Parametric Release 4.0 and DatecodeM110 Hiding cosmetic lines in the general view also hides cosmetic lines in child detail viewsPlease tell me how to hide the cosmetic lines in the general view and display them in the detailed view. ---------------------------------------------------- Translated the text from Japanese to English using google translate. Subject - 一般ビューのコスメティック線を非表示Body: 一般ビューのコスメティック線を非表示にすると、子の詳細図のコスメティック線も非表示になります 一般ビューのコスメティック線を非表示で、詳細図のコスメティック線を表示する方法を教えて下さい。 ----------------------------------------------------
I am developing a custom IFX fastener library. I want to build some fasteners in plastic material. I can easily change the parameter "MATERIAL" so that the string parameter would have any value, but I can't find a way how to actually set the model material in generated instances, so that the weight would be correct. So far i've tried:- assigning material in the source file that the instances get generated from- doing the previous but also adding a line to .dat file "MATERIAL NYLON66" (note that this material is currently assigned in the source part *.prt file, i haven't just used random name) However, the generated instances still get material "10_9" and density of steel. How could I set the plastic material in generated instances? @OliverGräbner - you have been helping me on another thread with IFX, but since this is quite different topic I thoght it would make more sense to start a new thread. Thank you!
I am using Creo Parametric Release 10.0 and Datecode10.0.4.0In Creo 7.0 I was able to list the PTC_REPORTED_MATERIAL parameter as column inside the model tree.In Creo 10.0 the PTC_REPORTD_MATERIAL is not shown anymore. Instead there is always List (in German Liste) displayed. Is there a way to display the active material of the model inside the model tree again?Here are the errors that I facedno error or warnin - the parameter PTC_REPORTED_MATERIAL is not displayed as expected.
I am using Creo Parametric Release 10.0 and Datecode10.0.2.0Creo 10.0.2.0 Supports the import/unite of SolidWorks 2023 data.When do you plan to support SolidWorks 2024?This is a major Roadblock for our Creo 10 update with important new functions.CS134024 only shows SolidWorks2023 from Creo 10.0.2.0Thank you for your feedback and support.
1. about meWe are producing articles for shop equipment. I'm a developer for metal and plastic components, assemblies and part lists. Responsible for all communication with peripheral departments like production, sales, purchase and marketing. 2. softwarePTC Creo Elements Direct Modeling 20.0 including sheet metal and Phoenix PDM 11Additional Solidworks and Blender. 3. ideaPerspective 3D view in Annotation. 4. use caseNot a daily task. Some 3D views of very long or big parts look funny in this straight 3D view nowadays. 5. valueWe often make pictures for manuals or customers (pdf). Then a more realistic view could be helpful for "CAD-Foreigners".
I am moving my files from one computer to the other. I copied the files from a computer using Creo Parametric 10 to a computer using Creo Parametric 9. I am unable to open any of the files, even though the association with Creo seems to be valid. The files show up as .prt or .asm, as they should and they have the proper icon. But I can open any of them, even simple beam element .prt files. So I'm assuming that there's a reason copied files don't work this way. Is there something different in the setups between the two machines that I should take a look at? p.s. I'm assuming this question belongs in System Administration, but I'm not sure.
1. Are you using a workaround?As for the pattern feature, if it is deleted once, then the feature parameter is created/changed, and then patterned again, it is reflected in the pattern all at once. However, repatterning often takes longer.2. What is the use case for your organization?Improved input efficiency for feature parameters. In particular, it is desirable that feature parameters such as patterned parts can be input and changed together. Please consider the following three improvement plans. *Methods other than the proposed three may be used. -improvement plans- (1) Apply to all by input/change to one model in the pattern. (2) Apply to all in the pattern by inputting and changing to the pattern feature itself. (3) Select multiple models to apply feature parameters to all of those selected in the batch input/change. 3. What impact does this problem currently have on your organization?The more components and the more pattern features, the more man hours it takes. For large
Hello everyone,I am currently using Creo 9.0 to explore the effects of corrosion on bolted joints, particularly in relation to Tightening Torque and Initial Load. My plan is to start by analyzing a standard bolted joint to understand its behavior under typical conditions. Afterwards, I intend to modify the material properties to simulate corrosion and perform the analysis again to observe any correlations.Could anyone provide insights or resources on studying corrosion's impact on these factors? I've struggled to find relevant information on this topic.Thank you for any suggestions you might have!
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?20.6 2. What is the problem?In Annotation, drawings can greated with the multi-language drawings module, in several languages.With the multi-language drawings module, the production data (PDF) is created with the set language by the user. So it can NOT be guaranteed in which language the production documents are available.3. Are you using a workaround? If yes, please describe it.We use a language module from MAIT, which was programmed for us. The language change takes place in the TaskAgent with the Drafting.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.- The use of the language module makes sense if there are several development and production sites.- One development site can create the document in its local language.- Other development sites can switch to their
I have successfully used a specifically sized flat Equation curve in my die designs. I have on a number of occasions however needed to use the same radius and spacing around a rotation which to this point have been very fudgy.Below is the equation that I have been using.This results in a curve like the following.Would it be possible to make an equation curve to the below shape? The spacing would be the same as with the top example but I would somehow need to be able to define a center or slope. Can this be done?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?creo 8- 2. What is the problem?in the flexibility dialog of a Part or Assy, offer pre-defined states which change DIMS, FEATURES, PARAMETERS.. ETC similar to the VIEW MANAGER's ALL tab. 3. Are you using a workaround? If yes, please describe it.setting each component's flexibility in an assy by hand..4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Components or assys in an assembly which are flexed could easily have STATES or an ALL tab with pre-defined states we can use which set parameter, dims and features all at one time.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)not much currently, but could easily replace family tabled items in the future where you do not want the extra ins
status = ProBrowserAuthenticate(username, password); status = ProServersCollect(&aliases); status = ProArraySizeGet(aliases, &num_servers); for (i = 0; i < num_servers; i++) { status = ProServerUnregister(aliases[i]); } ProPath serv; ProStringToWstring(serv, (char*)workspace.c_str()); ProPath URL; ProStringToWstring(URL, (char*)serverurlw3.c_str()); ProName wsName; ProStringToWstring(wsName, (char*)wsNamestr.c_str()); status = ProServerRegister(serv, URL, wsName, &aliased_url); status = ProServerActivate(serv); ProPath* p_file_name_array; ProPath* p_subdir_name_array; //string da = ".asm,.prt,*.drw"; string da = "*.drw"; ProName namme; ProStringToWstring(namme, (char*)da.c_str()); status = ProArrayAlloc(0, sizeof(ProPath), 1, (ProArray*)&p_file_name_array); status = ProArrayAlloc(0, sizeof(ProPath), 1, (ProArray*)&p_
Hello all i do have some Problems questions in understanding Sensitivity Analyses and Cordinate Systems What i have is the Default CYS and an Offset CYS that i create i control its Origin with Paramets as followsX=200Y=200Z=-200 the relations i use look like this :$d3=X$d4=Y$d5=Z when i now start and run an sensitivity Analyses for Parameter Z with a minimum Range of -220 and maximum of -180 it runs though. but when i recheck my Parameter for Z it has changed from-200 to +200 and the Coordinate has flipped its Position. is it possible to avoid flipping Parameters or Dimensions i don't want the minus to disappear? can someone relate and help out?Kind RegardsMarkus
“If people could do more with their lives because they’re getting better sleep, that's hugely impactful.” Eight Sleep is at the forefront of transforming the way we rest - come on a journey with us as we delve into this new sleep technology with their latest innovation, the Pod 4 Ultra. The new AI generated mattress can regulate your temperature, detect and prevent snoring and, reminiscent of a reclining chair, it can adjust to alter your body position. In this episode, we’re taken on a tour of the Eight Sleep workshop space by technical program manager, Harry Xiao, who provides us with an insider's look into the innovative features of the Pod 4 Ultra. He guides us through the functionality of autopilot technology, explaining how it ensures a dreamy sleep environment tailored to individual preferences. We also learn about how important rest is in our day to day lives.
1. Are you using a workaround?Yes, you can currently change the default orientation and then click on the saved orientations and then click on the default orientation.2. What is the use case for your organization?This idea would save some training and make it easier for users to use the product out of the box.3. What impact does this problem currently have on your organization?Users get confused because they don't see the part geometry that they are expecting. Saves some clicks.Describe the Problem If you have a CSYS way off in left field then when you open a part Creo opens centered on the default CSYS which may not be where the part geometry is. By allowing the part to be opened in the default orientation it would allow users to zoom in on the geometry for the part and then always open to that orientation.
I saw this post from the recent Creo Illustrate training at Blue Origin this week - sounds like it was a great event! https://www.linkedin.com/feed/update/urn:li:activity:7196656920093425665 Next up for Jeff Coon and the Creo Illustrate team - a webinar on May 29th! Technical Illustrations for Service: How Tech Pubs and Tech Illustrators Bridge Complexities in Communication Imagine being able to take complex engineering designs and turn them into easy-to-understand visuals - making the intricate simplicity itself, perfect for manuals, assembly instructions, and more. With Creo Illustrate, you can create illustrations that not only look good but also communicate effectively. Creo Illustrate is a powerful tool that transforms 2D and 3D CAD data into engaging visual illustrations and animations that manufacturing and service teams rely on to get products out the door faster. Enhance Visual Communication: Utiliz
Hi All, I am looking forward to do a modal analysis of two disks connected with a spring. so could you please advise is there any way to use spring command ? If so how to define it properly? I would appreciate your help with it.
When selecting the “Perform Symmetry analysis” option, Creo performs a symmetry analysis to identify existing symmetric and antisymmetric components. These components can be reused instead of creating new mirrored models.Be aware that there is no Symmetry Analysis on the following componentsSkeletonsNon-geometric simplified representationsAssemblies with excluded or non-geometric simp rep components
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.CAD business owner for SOMFY group2. What version of Creo Parametric are you currently running?Currently CREO7 and CREO9.0.2.0 in April3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.ISO 1302 roughness symbol is native in CREO9 ... but ISO1302 is canceled and replace by ISO219204. What is the use case for your organization?Roughness symbol is used in drawing and 3D5. What business value would your suggestion represent for your organization?The new symbol of ISO21920 precise if it's linear or surface roughness.and is going to replace old symbol(ISO1302) à (ISO21920) The new line is for linear roughness ; For surface roughness, il is a losange.We create the symbol in CREO7 ; The point is unwished ; there are some options below Ra1.6, but I don't found how insert a blank as optionCould
I'm trying to create a spring in "Mechanism". What I did was I created two simple components in an assembly, and when the assembly is activated, I clicked Applications->Mechanism, and then a couple of options including "spring" are greyed out. in "insert" ribbon, only "servo motors" is available to select. All items in "properties and conditions" ribbon are greyed out. There is no "spring" option under mechanism tree. I'm using Creo 9.0 Parametric. Can someone help? Thanks!
I need to mill 32 identical objects from a sheet of aluminum. Operation includes drilling, countersinking, pocket milling and profiling of each part. I've got the first instance set up in manufacutring and now I want to copy it into a 4x8 array such that all of the holes will be drilled, then all the countersinking, then the pocketing andf finally the profiling. I'm sure I've done this, but cannot remember how.
I have a flexible torsion spring modelled.I have an angular dimension annotation calling out the angle between the legs. When the spring is in the free state the legs are parallel and therefore @ 0° and the dimension annotation fails, and so does the model.When the spring is shown in the deflected state @42°, the dimension annotation is shown and the model is happy. See below As the spring will be saved in the free state, how do I prevent the annotation / model from failing. I do not want a separate family table member, combined state, simplified rep etc. I just want the base model to have the annotation without the failure in the free state. Any ideas?, Thanks.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 10.0.0.02. What is the problem?Unable to Tie Orientations of multiple windows together in order to rotate and zoom in unison. This should be similar to Creo simulate results windows ability to Synchronize Simulation results.3. Are you using a workaround? If yes, please describe it.Most similar feature is View state compare but it has to be set up which orientation to use for each state and if you want to move at all from the chosen orientation its very difficult to make the same orientation change in the other window.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Any sort of Review between two similar parts/assemblies. Creo View Compare only works in one window and the overlap can be hard to understand more basic changes.5. What impact does this problem cur
When duplicating a model along with its drawing, I encounter a warning after modifying the part, indicating a duplicate label on the drawing. However, despite searching, I cannot locate the label named "A." Interestingly, the system allows me to add "A," but it appears with a line below it. This suggests that the original "A" may have lost its reference and is not visible on the drawing. Additionally, I cannot find it in the model tree to delete it. How can I resolve this issue or identify the location of the duplicate label?
"In memoriam of Professor Ivo Babuška (* 22 March 1926 – † 12 April 2023), a Czech-Americanmathematician, one of the most important developers of the p-method of Creo Simulate."
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.