Recently active
I have connected the Pro/Library to our Windchill, where we have all our company library parts.But the standard library view shows only the part number all part attributes are missing. But it is nearly useless for the users because they cant see nearly nothing when searching for parts. Is there a way to bring more views (the windchill views) into library?
Hi, I have developed some mechanism in Creo4 by linking to the parameters and it was working fine.Now we have updated to Creo8 and when I try to update my expression it shows "entered value is invalid". Could you please support on this issue, thanks.
I am using Creo Parametric Release 11.0 and Datecode11.0.0.01. how to understand toolkit api ProDrawingViewOutlineGet ?This API returns the result ProPoint3d outline [2], why can this result describe the outline of this view?2.how to confirm notes inside drawing boundary ?
@ChrisG I did what all you said until the end in topic. There is no protk.dat file to reference under the "Configurations files read." Do I just create a .dat file like the original commenter did or how do I go about this?
I'm trying to follow the directions, from:https://www.mathworks.com/help/smlink/ref/linking-and-unlinking-simmechanics-link-software-with-proengineer.html So I can access the toolkit and simulate my assembly in Simulink, but I can't seem to find the protk.dat file the website mentions. I looked in the configuration files that PTC Creo is running and the protk.dat file wasn't there either. I attached a screenshot below. How should I go about this?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 9.12. What is the problem?Components behind surfaces with small thickness, are overlapping and are displayed even if they should be hidden. 3D FIGURE2D FIGURE 3. Are you using a workaround? If yes, please describe it.No, workaround is viable. The suggested workaround in article CS147886 is not a viable solution, when dealing with big assemblies since all the 2D figures must be re-rendered.This issue is known since 2013 and Illustrate 2013 and there is the SPR 28225524. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The internal sheetmetal components should be not visible when you look the assembly from outside. But if you zoom out enough the entire assembly, you will start seeing the edges of the internal sheetmetal components. They s
1. Describe the Problem1) Add the option to not show the current implementation of the automatically created hole note. When the hole note is automatically created the annotation is part of the 3D annotation set. This has been previously request by others, but remains an issue.02-25-2016: https://community.ptc.com/t5/Creo-Parametric-Ideas/The-option-add-note-unchecked-by-default/idi-p/46312905-25-2022: https://www.ptc.com/en/support/article/CS1594622) Provide enhanced methods for hole identification. 2A) For instance instead of a separate hole note, can the hole details instead be pushed into the drilled hole dimension. I often either do this manually or the feature is provided by GDT advisor.2B) Could the standard note tool provide a UI to create industry standard callouts by selection box. I know there is some capability to setup specific type notes in the hole tables, but the number of options to setup is cumbersome in the current hole t
Is there a way to use Material Side: (side one, side two, both sides) to drive a parameter through pro-program or relations?
I have an assembly with a note I would like to have displayed in a combination state. When in the model I have to click on the note in the model tree in order for them to appear. If I click on the "show annotations" button the notes appear but so does every note down the piece parts which is way too many and cluttered on the screen. Once I switch combination states and go back (despite hitting the update button) the notes are gone again. How can i get only the notes/annotations in the top level assembly to show? The show annotations dialog box has nothing in it to select or filter.
I am looking for any help on the below code. The pin-out table is not loading in my drawing, and I'm not sure why. The error is XToolkitGeneralError.I currenrly have copies of the pin-out.tbl file in my "pro tables directory", my weblinkexamples folder, and my jscript and html folders under that. I also tried my work space as well.The table has two repeat regions, and works fine when I load table from file in parametric. function createEdgeNote(max /* integer */) { if (pfcIsMozilla()) netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect"); /*--------------------------------------------------------------------*\ Get the current drawing & its background view \*--------------------------------------------------------------------*/ var session = pfcGetProESession (); var drawing = session.CurrentModel; if (drawing.Type != pfcCreate ("pfcModelType").MDL_DRAWING) throw new Error (0, "Current model is not a drawing"); /*-----
I have a piping model done in Creo 8 piping. The line has valves in it. They are inserted valves and are intelligent, When we export a .pcf file to use in another piping software. The piping is cut where the valves are, so it knows the valves are there, but the valves do not appear in the other software. If I open the .pcf in notepad it shows the location Any help would be appreciated. KM
Hi everyone, I am using Creo 9.0, and when trying to open one of the variations of my project created through nested families, the parameter I want to change gets changed but there is no way to regen the model. When I go through the first set of families it works perfectly, then I can choose the generic and everything works fine, but it doesn't work as it should.I attach some photos.Thanks, JoanHi everyone, I am using Creo 9.0, and when trying to open one of the variations of my project created through nested families, the parameter I want to change gets changed but there is no way to regen the model. When I go through the first set of families it works perfectly, then I can choose the generic and everything works fine, but it doesn't work as it should.I attach some photos.Thanks, Joan
I am using Creo Parametric Release 6.0 and Datecode6.0.6.01. When adding one-sided contour tolerance, a red line and warning message appear (see attached image)2. How to move the reference datum?
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I am a manufacturing engineer at a high tech equipment manufacturer. My illustrations are used by technicians to guide assembly.2. What product and version are you currently running?Illustrate 7.0.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When a PVZ link is updated in an illustration, the links to some parts will break. These parts need to be manually relinked but since the geometry of these parts are not visible, additional research has to be done to determine what part it is.4. What is the use case for your organization?We update the PVZ file in old illustrations frequently.5. What business value would your suggestion represent for your organization?This could represent significant value due to the large volume of PVZ updates we do, saving us potentially several hours per updated illu
Every callout that is put in looks like the picture. No numbers or quantity. Settings for the callouts look fine. Any ideas what causes this?
Hi All,Any ideas how to get the number of Pattern Members when using a Point Pattern? I'm not looking to drive the number of Points in the Sketch with this, it's display only. Use case is an irregular pattern of holes, and everything works fine except I don't have a way to add the number of holes to the hole callout. On a Dimension (and Table Pattern I think) this shows up as a parameter that can be added.Thanks in Advance
Hello! I need to modify display style usingJ-link.But I don't find any API.
I am using creo 8.0.Working in assembly , when I create new component I don't see option of 'Leave the component un placed' which is usually on highlighted section. How can I turn it on ? Below is image I found on website
// Set 1 : multi selectionint asm_prt_sels;ProSelection *prt_asm_sel_array;status = ProSelect("prt_or_asm",-1, NULL, NULL, NULL, NULL, &prt_asm_sel_array, &asm_prt_sels); //set 1ProSelection asm_prt_sels_copy;status = ProSelectionCopy(prt_asm_sel_array[0], &asm_prt_sels_copy); //manual array number // set 2 : single selectionProSelection *asm_array;int asm_sel;status = ProSelect("prt_or_asm", 1, NULL, NULL, NULL, NULL, &asm_array, &asm_sel); // set 2ProSelection asm_sel_copy;status = ProSelectionCopy(asm_array[0], &asm_sel_copy); ************************************************************************************************************************************************Hi all, Initally I tried to access set 1 array below after set 2, which is not working. It works only when I put manal array number (prt_asm_sel_array[0]) with equivalant proselection copy, I can access successfully acess below to set 2. But if u
Hello, is it possible to set the Remove feature with "Leave open" mode checked by default? Sometimes I leave it unchecked by mistake and start collecting surface patches, but Creo slows down trying to calculate ways of closing the quilt. If possible, I would set the Creo config with "Leave open" checked (also, I prefer to uncheck it after selecting a bunch of patches, instead of waiting each time a new patch is added). Thank you in advance.
Can somebody at PTC please have the common decency to advise us on the intentions of the License Server for Modeling Express 8. Either that ore release the product from this requirement. Regards (but not expecting a reply from anyone in the know)
Dear Forum Members, I am seeking detailed information about the APIs used by Creo Parametric for enhancing visualization, rendering, and potentially GPU computing. This information is crucial for me to select the optimal hardware for using the software. Specifically, I would like to know:Does Creo Parametric utilize renderers that exclusively support CUDA or OptiX?Are there functions within Creo Parametric optimized for GPU acceleration (particularly using CUDA), such as for Finite Element Methods (FEM)?If such functions are implemented, are they exclusively optimized for Nvidia hardware, or is there support for GPUs from other manufacturers as well?Additionally, is there a minimum or recommended hardware build? I am currently picking the parts for my PC, and this information is very critical. We are now useing creo 10.0.4.0 with WC12, we are alwys a year behind the newest gen (We always start at X.0.4.0)Thank you in advance for any assistance and information you can pro
I am using Creo Parametric 10.0.2.0 Background: I am an experienced Electrical Engineer, have used AutoCAD my whole career, mostly 2-D but have done 3-D objects. I recently learned Altium and have done 2-D and 3-D modeling there. I have used Creo to view objects in the past as well as creating assemblies with pre-existing 3-D models. In short, I have background in CAD and 3-D modeling, and in Creo, but not in Creo 3-D modeling from scratch. However, today I have been asked for the first time to create a 3-D model in Creo - and I am struggling. I am starting with the simplest model imaginable, but I have yet to grasp it. I just need a flat panel. The panel is a flat rectangle with small rectangular "ears" with a thickness of 1.5 mm.. I created a sketch of 3 rectangles: one large and two small rectangles each on the center of the long side. Should be easy, I should just need to extrude it with a dimension of 1.5 mm at this point. Obviously, extrude from surface is the
I am using Creo Schematics 9.0 and Windchill 12.0. I want to load my central catalog in Windchill, set the Windchill path as a root folder, and access library items from Creo schematics. Is it possible? If it's not possible, what is the best solution to access the central catalog when users are located across the different geographies?
Good day to you sir I am trying to solve a similar situation for an intermediate shaft in a 2-stage gearbox but not modal analysis rather a simple von Mises static analysis on the whole shaft length, would like to know how to adapt these loads and constraints and other idealizations to run a similar case, is it necessary to idealize all the whole bearing Assembly like this or just adding 2 spring idealization and a weighted link to the surface area of the acting bearing suffice, as far as the simulation is on the shaft, the consideration of gear teeth doesn't matter so applying torque on the disk with pitch diameter is satisfactory right ? i would like to know how to apply idealized torque on these 2 helical gears while i have 2 fixed bearing holding this shaft and enduring a preload in between. regards
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.