Recently active
How do you create those representations? If I create reps I can't change the colors. Only if I make appearances. But appearances cannot be set on the drawing... So If I set different appearance's on the combined state in the model it works just fine, but on the drawing it is not! How should I do it?
I am using Creo Parametric Release 4.0 and DatecodeF000Thank you for your assistance.We are currently using Creo 4.0.I am thinking of installing the new Creo from October this year,How different is the interface, feel of operation, and functionality of versions 9.0 and 10.0 compared to 4.0?I apologize for the vagueness of this question,We may need to revise our textbook, so we would appreciate it if you could enlighten us.Best Regards,Ryoji Kaneko
I am using Creo Parametric Release 10.0 and Datecode10.0.3.0I was trying to measure the torque changes in spur gear for study purpose but was unable to calculate it using MDO.Is there anything that I am missing,I have applied Material as steel, all connections have applied with gears, a force motor to drive the pinion and another force motor with 0.000 coefficeint on the gear to measure the net load on it. the net load is coming out as 0. If any one have done this before then please let me know.
1. Describe the ProblemThere has to be a better way: assemblies with countersink holes & flat head screws. I have a hole pattern of countersink holes.I assemble a flat head screw to this hole (shank to hole, tangent the hole surface to the screw taper. it then want's a 3rd constraint. I add a parallel constraint: plane to surface..) I then pattern the screw, to follow the hole pattern The screws then all follow some weird pattern. They are all there; the dots show the proper placement, but the screws are all wonky. Only the original is properly placed in its hole. The others are all then floating in space, randomly.. (from what I remember this has always been a problem..) Either fix the way the pattern function works with these type of constraints (its the tangent constraint that causes this behavior..)orFix / find a better way to constrain countersink holes & flat head screws..2. Are you using a workaround?cons
I recently switched to CREO 10 and the start_model_dir and template_### in the config file don't seem to work. When I start a new part, with the use default template option picked, a "New File Options" screen pops up and my templates are not there. If I browse, it goes to the "start_model_dir". Is it going to be like this all the time? This opens up the possibility of choosing the wrong template. It leaves with questions: 1) Why didn't the new part use the template that is assigned in my config file when the "default template" option is chosen? 2) Why aren't my templates shown in the "New File Options"? Why do I have to browse?
WF3 JLink questionHow do I add relations to the "Post Regeneration" section of the relations? -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>
I have a 3D PDF that I received from the supplier. Is there any way that I can open it in Creo Parametric, similar to the Step file. Would it be possible to save that file in Creo Parametric?
Would it be possible to open a 3D pdf file saved as a pdf in Creo?
HelloDoes anyone know how I can get material to show up in a title block? I'd like to see the material assigned to a part in the drawing.i couldn't find the parameter for material.Any assistance is greatly appreciated!
I am using Creo Parametric Release 4.0 and DatecodeM140we are trying to create a ordinate dimension but the problem is the dimension is not created from the actual witness line, is there any possible way to move the witness line using Protoolkit.
We have been tweaking our config.pro lately, adjusting settings which we normaly set by hand. So one setting is the comp_assemble_start, which we have set at contrain_in_window. When adding a new component to an assembly, this setting will show a new window for that component. But the component is not being shown in the main 3D window. We have to click the button "Show component in the assembly window while specifying constraints" So searching for more config options, I encounter display_comps_to_assemble, which we have set to yes, but nothing happens. It seems like Creo is ignoring that setting. Does anyone know how to fix this?
Hello, Following video will highlight Generative Design behavior when setting Total_Load_at_Point to the value "Rigid" or "Deformable" .
I need to import several STEP files exported from PTC Creo.Currently all imported objects have a very long name similar to this:63BA2014C78DEC881B086CFF8F77897FA0C680C8|:|B8A4396250C5687B1D31E70758B30729E1AC4426I did find this option "Over-ride with explicit user defined names" in the manual here:https://support.ptc.com/help/creo/creo_pma/r11.0/usascii/index.html#page/data_exchange/interface/step_export_profile_and_config_options.html#I assume that would give me actual names when importing. Unfortunately I did not find any information on how to set user-defined names inside Creo. Any information on how to do this would really help me. Thanks
Good morning is possible to insert a family table file of an exiting profile in AFX?
1. Describe the Problem Oftentimes, especially when working on models partially derived from imported geometries, it takes a lot of effort and time to obtain a closed quilt that can be solidified. A suggested improvement is to include a third option in the merge feature (or create a separated “approximate merge” feature, if preferable): this option could be named Auto-stitch or similar naming.If the user selects the Auto-stitch function, a “tolerance” field is activated, where the user can select any value greater than the model Accuracy. Possible implementation:First attempt: the software extends (Same/Tangent/Approximate) both sides of the open gap + mergeSecond attempt: if the neighboring patches cannot be extended, a tiny surface is created (e.g. Boundary Blend) that fills the gap (preferably with tangent-tangent boundary conditions; free-tangent or free-free would be acceptable in the worst case scenario) On a side note, the Creo Import Data Doctor has some tools that allow to obt
1. Describe the ProblemWe are using the ProToolkit to read a customer file and examine Cosmetic Sketches. Currently, we are not able to read cross-hatch information using the API.This is a problem for us because our software needs to represent the sketches as accurately as possible.2. Are you using a workaround?No, we have not found a workaround, and support recommended opening a Product Idea.3. What is the use case for your organization?Our organization uses the ProToolkit to generate drawings and images from Creo parts. Without the cross hatch, the drawings appear incorrect.4. What impact does this problem currently have on your organization?Currently this is not a large impact as not many customers are using Cross-hatching in Cosmetic Sketches.
Hello, I have an error in creo view, when I open it. As it is in Portuguese. creo view lite has reached its memory limit and sewra has closed use a product version with the massive mount license option to view this data . We did the tests on another machine and it was normal, I already removed the program, I restarted the machine and nothing
I am trying to create a curve between two points(3D) on a surface that should trace the Manhattan distance instead of an Euclidean distance. How do we achieve this in Creo 9?I have already tried the "Curve through Point and Direction" option and it doesn't work for my case as it requires additional direction reference. FYRI would appreciate it if anybody could help.
To get the a part volume, in LISP we can use the function(sd-call-cmds(get_vol_prop ...Is there a way to have the total surface area of a part? I am using PTC Creo Direct Modellin v20.5.
Does anyone have a reference , any link , a video etc. on how to use parameter option as a variable selection in sensitivity or feasibility analysis in Creo BMX
In Creo 10.0 and above, when converting stp files, am I not able to set the coordinate system?Please let me know if there is a way to set it with the coordinate system I made
Is it possible to import datum points in Creo model stored in .pts format file using Creo Toolkit C++ Programming. Which functions and libraries can be used to import it. TIA.
I would like to create a parameter that stores the previous part number or name of the part that the part was saved from. For example if I have a part "Gear1.prt" and I save as to a new part "Gear2.prt" I want to store a parameter when doing a save-as that says "Gear1". That way users that perform a save as automatically have a history of where this design was made from. It can be useful when going through a parts history. I don't want to make it a type in parameter because users would forget to add this information. Does anybody have any insights into how this could be done?
The Creo Parametric software is multi-cad. Which extensions does it open natively?Is there a document that shows this?
Hi Guys, Im running a simulation that is running based off of the subassembly sets of heat load and convection boundaries. For example:Assembly 1 has 1 heat load, with 7 conv boundary conditionsAssembly 2 has 1 heat load with 4 conv boundary conditionsAssembly 3 has 1 heat load with 3 conv boundary conditionsthese Heat loads and convection boundaries were added to the sub assemblies, the new assembly of these 3 has not had any additional heat loads added. how do i run a thermal analysis with all 3 heat loads working together. It seems like the only issues are the 3 heat loads. The convection boundaries seem to run fine. It wants me to choose a single load set for the new assembly. It will not allow me to use all 3 load sets at once.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.