Recently active
Hello there, I've got a problem I can't get my head around and I hope some of you have got a suggestion for me.I'm trying to to import a STEP file (an assembly) into Creo and the problem is that all the parts name get changed and doesn't stay the same as per the original file. The get renamed like MG_100000 etc.Does anyone know how to make Creo to keep the original part name?
I am trying to animate a mechanism for a presentation but I keep getting a warning that says "Capture Warning: Capture failed due to compression failure". This only occurs if I enable "Render Frames". If I disable this option the capture will work but the quality/resolution is terrible. Anyone know what would cause this issue? I can't find anything online related to this error.
Creo 9.0.4 is going to 'not responding' state. Tried re-installing, clearing cache.Verified config.pro. Nothing seems to work. Could you help with some suggestions other than graphics card?The same configuration for different users seems to be working fine, but only for one user, it's not working.Your assistance would be greatly appreciated. Thank you in advance for your support!
I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Parasolid files (x_t) when imported in CREO 6.0.6.0 not visible but it is opening and visible in CREO 10.
PDF and Creo example
I'd like to discuss how to automatically update the projection type in Creo drawings based on the drawing format.Creo 10 Here's the scenario:The Creo config currently points to the drawing setup file V:\Test\CreoSettings\configs\Drw_Setup.dtl.This file defines the projection type as FIRST_ANGLE.We want to create a mechanism that switches the projection type to THIRD_ANGLE if the drawing format is test_T_americas.frm.Two potential approaches exist:Scripting: We can develop a script (e.g., Python) to check the drawing format and update the Drw_Setup.dtl file accordingly.Manual Modification (One-Time): For a one-time change, we can manually edit both config.pro and Drw_Setup.dtl to reflect the desired behavior.What are your thoughts on the best approach for this situation?Please let me know if you have any questions or require further details.Thanks,
Hi,I would like to change styles of the same sketched line used on two different views and on two different sheets. In the first view, and in the first sheet, I want to use a yellow "geometry" style line.In the second view, on second sheet, I would like to use a yellow "phantom" style line.I've tried to use the "Layout --> Line Style" command: when I change the style of a line on one sheet, it change the style on the other sheet too. Is there a method to obtain this result? Thanks a lot.
I have specified a local folder as the working directory in Creo.then want to use Weblink to retrieve models. However, I found that currently it can only retrieve models in the current directory and does not support models in subfolders. Is there a better way to handle this? code like thislet session = pfcGetProESession();let currenDirectory = session.GetCurrentDirectory();let device = currenDirectory.split(":")[0];let path = currenDirectory.split(":")[1];let modelDescr = pfcCreate('pfcModelDescriptor').CreateFromFileName(fileName)modelDescr.Device = device;modelDescr.Path = path;let model = session.GetModelFromDescr(modelDescr)if (!model) { let retrieveOptions = pfcCreate('pfcRetrieveModelOptions').Create(); model = session.RetrieveModelWithOpts(modelDescr, retrieveOptions);}
I have a clear dome on an assembly. It does not show in my renders. Is there a setting? I am using a ptc clear type color for the dome. Creo 3.0 m080 Wayne
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?creo schematics 102. What is the problem?the multi-sheet viewer does not currently allow editing on the sheets you are viewing. Some people like using it as a standalone window, but what if we could make the main window split and allow for editing similar to splitting an excel window.3. Are you using a workaround? If yes, please describe it.no4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.allowing the ability to make edits across multiple sheets seamlessly without flipping the tabs at the bottom.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)few users, but could be a large boost when working with multiple sheets.
I am trying to open a STEP file using a template, as shown in the attached image.It works fine initially, but if I close Creo and reopen it, the template file changes. Could you please suggest a solution?
opening native multi-body solidworks2022 part file opens as an assembly in creo9should open as multi-body part file ?thanksRich
Hi,Is ist posible to use parts with complex geometry for familiy tabels. Pls see attached picture. I have a part where I want to drive the outer diameter by a family table parameter and the inside conture, which has a lot of dimension, should also scale when I change the diameter. I dont want to put in any inside shape dimesnion into family paramter because this is way to much work.The relations between outer diameter and inside shape should also be constant for each family table part. Basis question: Is this possible, If yes - how?
When opening a standard part file (typically in .step or .iges format), the system should ask for the supplier's name. We would like to have a drop-down list . This supplier information should then be linked to the part's parameters Common supplier listFestoSMCEmcMisumiSchunkSchmalzABBOther(manually edit)
I would like to probe inside a thermal analysis but when creating a "section" view and trying to select a point on the inside, the invisible part is selected instead.Specifically, I would want to probe the yellow parts. Is there a way to select a point not on a surface? On a plane?
illustra publishes the CGM diagram, and the CGM diagram is garbled in Chinese after the PDF is released through PE; ----------------------------------------------------- Subject - illustra发布成CGM图,通过PE发布PDF后CGM图中中文乱码 Body - illustra发布成CGM图,通过PE发布PDF后CGM图中中文乱码; - By Community Moderation Team -----------------------------------------------------
Hi everyone,I am facing an exciting challenge and am hoping to find some expert opinions here. I have a comprehensive family table with over a thousand different parts and want to identify the optimal part from this collection. My idea is to conduct a CFD analysis to determine the best results. My question is: Is it possible to perform a CFD analysis for such a family table? Can the entire analysis be precomputed so that, in the end, I only need to go through the results? I understand that the interpretation of the results ultimately lies with the viewer, but it would be great if the analysis process could be automated to identify the best parts more quickly and efficiently. I am using Creo 10 for this task. Has anyone here conducted a similar analysis or can offer tips on how to approach this? Thank you in advance for your help!Best regards 🙂
Hello, I am trying to write a C++ code into Creotoolkit to import relations from .txt format file and then regenerate the model. Can anybody guide me how can this be achieved? TIA
I am trying to get the color of surface after selecting it with a selection pointer as described in the toolkit user guide. It appears that the information resides wfcAppearance which is extracted from wfcWSelection. pfcSelection_ptr selSurface = pfcCreateModelItemSelection(pfcModelItem::cast(surfaces->get(0)));wfcWSelection_ptr wselSurface = wfcWSelection::cast(selSurface);if (wselSurface->GetVisibleAppearance().isnull()) cout << "Error: wfcAppearance nullptr" << endl; but GetVisibleAppearance() is returning a nullptr. However, when I select a surface using user selection process by directly clicking on it after invoking session->select(), I am able to get wfcAppearance where i can access surface properties including its color. Can anyone please help why is GetVisibleAppearance() returning nullptr from pfcSelection_ptr when selecting a surface programmatically using pfcCreateModelItemSelection() instead of clicking on it
We are currently entering material and remarks information in columns. We would like to have a drop-down list in the material column with the specified materials, allowing us to select from the list. In the remark's column, the corresponding coating or treatment for the selected material will automatically appear
Hello,I used an angle to constrain a component in the assembly; the angle is assigned a random name (d58).Is it possible to change the dimension's name to something meaningful?The reason for this is to use a name that has meaning in BMX. Thnaks
I have a Creo Illustrate Professional - Floating license, when I try to open it, it doesn't do anything. License server put the path of the license even nothing barir
I have an assembly that has multiple representations , am using Creo 8 and no windchill.I want to save one representation as standalone assembly without referencing main assembly. Below is the workflow I have tried: When I use above method , I get new assembly as per below image. I did not select dependent checkbox My question is:1. why does my new assembly has different icon?2. Why does new assembly still being linked with main assembly (see below image)
1. Describe the ProblemPrevent incorrect unfolding on the drawing The base area must be specified when creating the development. If the wrong part is clicked on by mistake, the wrong development will be on the drawing. If a DXF file is used for production, the wrong part will be delivered! This article is already availableCS290414 - Flat view of a Sheet Metal part doesn't belong to the viewset in Annotation This should be prevented. One variant would be that only the model with the active view set is displayed.Perhaps there are even better solutions. See also the attached file and video.2. Are you using a workaround?When creating the unfolding, it is important to pay close attention to which model is the right one for processing.3. What is the use case for your organization?There are always cases where the wrong processing is on a drawing. If DXF is now used for production, the wrong part is delivered! This results in higher production costs and delivery delays.4. W
1. Describe the ProblemI can understand there is a 5.12mm3 interference, but I don't know how much is needed to move back in Y axis to avoid this, if that information was available, as a column display or right click on that row, that would be very useful.2. Are you using a workaround?Visually inspect and decide which direction need to find the interference amount, create a cross section & measure the distance.3. What is the use case for your organization?After detecting the interference, one typical action is to move the component away to avoid it. Having a max X, Y & Z value beside the volume would allow for a quicker solution implementation.4. What impact does this problem currently have on your organization?All users, adding several minutes to verify each interference.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.