Recently active
The title says it all.
3D Access is a very useful viewer not only for Creo Elements /Direct models. So it would be good, if the direct data interfaces, which are included in CED Modeling (SWX, Inventor...), would be also included in 3D Access. Some of my customers (with more then one CAD-system) would prefer to use 3D-Access as standard viewer instead of free viewers, if it was possible to open this external data.
Currently Creo 2.0 M170 the only option available to replace a flexible component is by copy or family table. I desire at least the options Interchange and Unrelated Component be made available to replace a flexible component. Reference CS132032.
I would like to see a set of features in Creo Parametric to allow someone to export the drawing views they setup in Creo as CAD blocks in DWG/DXF format. Case C12996357 describes two issues which were found to be working as designed. Currently, I arrange my drawing views and set an origin in the Creo drawing. Then I export as a DWG or DXF. I am required to open the DWG/DXF in AutoCAD and group each individual view as a block. I also have to name the blocks, which was done in Creo already. During the block creation I also have to identify an origin for each view, which was done in the Creo model using a coordinate system.
Currently, when assembling a component in a separate window, there is no way to control the layers or datum display in that window. This makes it very difficult to assemble small components in extremely large assemblies.PTC, please add display controls to the separate assembly window.
I want a shortcut key of "Rotate VP Axis +xx" "Rotate VP Axis -xx".Better to exist by default.
This type of functionality is not available in Sheetmetal MFG. If you want to have several contours / parts with bridges, you need to generate them already this way before adding them to the sheet. You could either use parts with the geometry of multiple sheetmetal parts merged or sketched geometry output to DXF (DXF shapes can be read into Sheetmetal MFG). I agree that this would be a nice new feature and hence encourage you to file it as a Product Idea. Of course the number of users of Sheetmetal MFG is small compared to the users of core functionality in Creo. Hence we will have to see, how many votes the idea will get in future, to be selected as an enhancement for a future version.
Need to be able to use smart BOM balloons on simplified reps.
Currently, when you register a Windchill server in Creo, it asks you for a Name and Location. The name is then used by Toolkit applications as server_alias, where server_alias MUST fit as shown here: wtws://<server_alias>/<workspace_name>/<object_server_name>If that is what the server_alias MUST be, why does it need to manually entered? It should be automatically harvested from the server Location. The server Name, then, can be whatever the user wants it to be in their server manager. In face, Name is an outdated field, since it used to control the display in the Folder Navigator, but has since been replaced by "Windchill Cabinets". The only place it is visible is in the Server Manager, and it would be nice to allow it to be descriptive without breaking toolkit applications.Reasons why:Users think Name means "give it a name", so they do.Users don't think Name means "the root path to your server"If you have multiple servers sharing t
The Creo Manikin library has Manikin files for just about every country. We have learned that the US Manikin models do not adhere to MIL-STD-1472 dimensional requirements. That seems like a shortcoming knowing that many US Defense contracts require the documentation in Creo. The current US Manikin does not seem to be receptive to modifications that could bring it closer in alignment with the MIL-STD dimensions. PTC Creo, can we have a Manikin library that adheres to MIL-STD-1472?
I would like a RMB option from a selected view (or multiple selected views) to match the view display properties of a different view. Once the function has been selected , you would be prompted to select the view which has the desired view display properties. This will change all the available options on the View Display pane.Reason for request is to reduce time & mouse clicks to change view display properties. We have many drawings that people have created with view display properties set as "Follow Environment" & "Default". I believe this is bad practice , because a drawing will display different depending on how each user has their environment set-up.
Request is two-fold.1. Provide an option/config setting to evaluate Assembly Level Cut auto-intersected components via true intersection. The nominal method would be to continue using the bounding box to determine intersected components, but allow the option to change this behavior.2. Provide an option to automatically re-evaluate auto-intersected components on regenerate. Currently, the system will collect intersected components automatically (by bounding box intersection), and place those components in the list. However, it does not currently re-evaluate this list when a component is no longer being intersected, and the only option is to manually remove the intersected component (or remove all manually and let the system re-evaluate what is now intersected).While these options would likely result in longer regeneration times in Creo, both would dramatically decrease the number of unnecessary Assembly Level Feature derivative models created in the PDM system.
No spaces? - i can create a folder with a space in the name - i can store files in a folder with a space in the name - i cannot name a file with a space in the name - this has been a "thing" for a loooong time, plenty of other polls already going on this topic I can use a dash here but i can't here? - i can create a file with a dash in the name - i cannot create an analysis with a dash in the name I can use a number here but I can't here? - i can create a file with a number in the name - i cannot create an analysis with a number in the name Please remove all restrictions to naming files/folders/analyses.
When creating a collinear constraint that places a line on colinear with a linear reference, Creo allows any H or V constraints to remain. This is technically over constrained, because both are only valid as long as the reference remains horizontal or vertical. If the reference changes, due to draft being applied for example, the sketch fails because both constraints cannot be satisfied:When a colinear constraint is applied, Creo should require that any H or V constrained be removed.
The automatic bounding box dimensions displayed on a drawing of a sheetmetal flat (see below) are handy - unless the company drawing standards dictate ordinate dimensions on flat views.These dimensions cannot be converted to ordinate and there is no setting that will prevent them from displaying automatically.The dimensions must be erased and new ordinate dimensions must be created in their place.Recommendations1. Allow these dimensions to be converted from linear to ordinate, or2. Provide a config option or drawing option that can turn off these dimensions to eliminate the extra step of having to erase them.
I think it would be handy to be able to with one feature at the assembly level be able to create a series of holes in stacked parts. In solidworks there is a similar feature where you can select the parts in a stack and select the hole type wether it is a counter sink, clearance, or tapped. This makes it easy to create different holes in multiple parts at once and also propagate the features to the part level as well.
It would be a real time saver if there was a button or a way to open the corresponding drawing for an onscreen model or assembly ? The other way around is easy as in the drawing you have on the left bottom a component tree to open the component but not reversed. This operation, retype the number of the drawing, is done several times a day by many designers and would be a real time saver. They are dreaming for years to have this
It would be great if you could have more than one active sketch window open, so you could flip between two models while still in the sketch window on both models. Currently you have to cancel out of sketcher (or it forces you to) and switch to the other model and go back into the sketch to interigate. Then cancel again and switch windows and go back into the sketch again. I find myself on complicated features going back and forth numerous times to see what the references are, or write down all the dimensions that I need to copy. It has got better in Creo 3, as if you are lucky it highlights the missing references (edges in a round feature) so its clear what your original intention was. Solidworks allows you to switch between different windows with open sketches with ease, its makes life alot easier.
in annotation you can only create a flat view of the entire part. it's not possible to work in steps.i would like a possibility to get a flat view with only the lips i have selected.
Since Creo 3, on a drawing, when you select Dimension and then choose your first reference, a preview of the dimension is attached to the pointer. If you press CTRL to select additional references, the preview of the dimension updates, based on the selected references. But, the preview of the first reference stays visible and will be shown (almost) on top of the pointer and so it's hard to select a second reference. This is quite confusing; at first sight it's not always very clear which reference was chosen exactly.It should be better to:- Let the preview of the dimension disappear from the moment CTRL is pressed (and, of course, show the corresponding preview after the second reference was selected)or- dynamically update the preview when you hover over the new selection(s). (Altough, this might be a little bit too buzzy)
One should be able to replace an external copy geometry by instance, that is:If the source part for the external copy geometry (ECG) is family tabled, than one should be able to right click the ECG feature in the target part and "replace". The functionality already works if the target part is family tabled (by having a reference model column in the family table) so it should also be able to work if the target part is not family tabled. Currently, if one points the ECG to a different model (even if it an instance of the current source model) one loses all of ones references and one must re-pick them and fix all the referencing features. By extension, this same functionality should be available for use with pro-program, being able to replace the source geometry by using a parameter for the model name of the source part, just as one does to programmatically replace a component in an assembly.
Please add the ability to add multiple Motion Axis Constraints to Snapshots when defining a snapshot.It's very time consuming having to select the command "Motion Axis Constraint" then only being allowed to select one motion axis and have to repeat 20 times.Also Highlight joint Axis on screen when Selected under the Constraints Tab while defining a snap shot.Thanks,Don Anderson
It would be nice to have the ability to define transparency in addition to default system colors.With this opportunity it would be possible to have transparent surface representation besidenon transparent solid geometry. With this constellation it would be easy to find out if thegeometry is a solid or a surface. If there are lots of surfaces inside the model it would behelpful to as well to find the correct surface for your construction.Additional to the transparency idea the edge display in shaded mode could be improved which isa related idea with the same scope in this community :Idea 7358 - Ability to have different edge colors for surfaces in shaded view
To improve the identification of surfaces in shaded view it would be nice to have differentedge colors for surfaces in shaded view as it is in wire frame mode.With this opportunity the user would be able to find out if the geometry is a solid or a collection ofsurfaces. If the edges have different colors depending on the status if the surface is merged to the next surfaceor not it would improve the work with surfaces in shaded mode.Additional to the edge color idea the default system color with transparency for surfaces could be improved which isa related idea with the same scope in this community :Idea 7357 - Ability to define transparency for default system colors
Hi,I would like to have a feature that would allow colors assigned to a part/assembly to appear in the 2D drawing. This would be helpful for clients to see parts that are part of a large assembly, which might otherwise be difficult to spot in a 2 D Black and white drawing. Thanks !Cheers,Avinash
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.