Recently active
This tool can be very useful while designing parts and want this curve to be part of the design model. For those not familiar with this feature: The Turn Profile feature creates a curve that represents the maximum for outside and minimum for inside boundary if your part is revolved about Z axis of a coordinate system.
Currently Creo Parametric 2.0, 3.0 do not handle high dpi displays well. These will only become more prevalent going forward and a decent solution is needed. Maybe a config.pro could be added to control text size in the browser?
In general, we do not want to print datum feature from the drawing, except displayed annotation axis. We would like to have confing option that never print datum feature even turn on the display on the Graphic Tool Bar. This can be saved the miss print.
We would like to have same View name function of Auxiliary View for Projection View.
There are 2 axis in the drawing which are displayed by model annotation. One is parallel to the screen and another is normal direction with respect to the screen.When user select the parallel axis as Sketch's Snapping Reference, it is fully highlighted but can not add to the reference. The other hand, when user select the normal axis, it is partially highlighted and possible to add to the reference. This make us confuse. Parallel axis should not highlight and normal axis should fully highlighted.
With the shade display mode, we can not see the Cosmetic Thread even if the shape extend outside of solid. This happen we create Chanfer after create Cosmetic Thread. At this case, we want to recognized this need to be fixed.
When inputting text into a table cell there is always a space which means the text is not in the center of cell.
Most case we want to measure the rough distance between the point of mouse pick, without create Datum point on the edges and/or surfaces. Currently Creo always measure the minimum distance between the entity. Solid Edge can be measure the distance of the point even there are no edges and surfaces.
I want to assemble the brown part like right side picture with Tangent constraint. Currently, we need to create additional datum plane.
It should not be created if it is not support.
Currently leader of Note can be Edit Attachment to anywhere. In our parts, there are many size of Pattern hole and we sometime need to Edit Attachment of the Hole Note. At the time, we want to select the edge only from same size of hole for avoid the miss selection.
it would be nice if the user could use the reference pattern functionality in Simulate in the same way he/she does in Creo Parametric. For example it might be useful to quickly create FEM elements such as screws, bolts or even surface regions. The only workaround I know is to use mapkey.
User should be able to switch the display between the objects that are NOT contained in the layer "Hidden Items" and see all that are in this layer. This function also exists in other CAD (eg in Catia is called "Show/No Show). This feature could be very useful to quickly locate and select the objects that are in the layer "Hidden Items".
In Creo Parametric 2 or 3 in drawing module user can't change a scale of an "additional view" - it have the same scale that general scale of the sheet. Why it's not possible to change? Every time all of users need it, but only one way it's trick to make general view and make a fake arrow Please fix it.
When creating a detailed view sometimes the show boundary feature does not work correctly. It sometimes displays the boundary around the entire spline defined boundary instead of just the edges of the model. I submitted a case to PTC but was informed that this is a limitation in the software and that I would best be served to post here in hope that PTC will address this in a future release.The green lines indicate where the boundary should be displayed.The red line indicates where there should be no boundary lines.
Momentan kann man die Einstellungen für den Ebenen Copiloten(UV/3D/verdeckt) nur permanent überDatei-> Vorgaben-> Machining -> Setzen der Standardwert in den …… -> Ebenen Copilot einstellen.Diese Einstellung kann man nicht ändern während ein Machining Befehl offen ist.
Wenn man Teile/Baugruppen kopiert bzw. Exemplare erstellt, so kann man nur für die Positionierungsoptionen "Auf/Ausricht" oder "2 Punkte" die Option "Mehrfach-Positionieren" verwenden. Diese Option "Mehrfach-Positionieren" sollte auch für alle anderen Positionierungsoptionen möglich sein.
Is there any way of making this relation work?SMT_DFLT_BEND_RADIUS = SMT_THICKNESS * 1.5If not, does anyone know why?Why would a SMT_THICKNESS * 1.5 relation not be functional when SMT_THICKNESS, SMT_THICKNESS * 2, and SMT_THICKNESS * .5 all work?Again, if not, PTC needs to fix this so that these relations can work. It would be much appreciated!Thanks!
Currently when performing "Save a Backup" on assembly with suppressed components, the suppressed components are not backed-up unless the component is in session. I would like an option to backup ALL components regardless. I have large assemblies with many suppressed components it is very time consuming to bring into session all the components just to have a backup of the current Assembly state. The backed up versions will be used for other design variations that use components that were previously suppressed.Thanks for voting.
I would like to see if any other users have this need.We work in a work where we deal with a lot of Architects and they all use Architectural Sheet Sizes.When we go to create our Drawing Formats, we have to use variable formats and input the Sheet Dimensions (i.e. Arch_C - 24"x18"). In our title blocks we want to use the &format parameter to automatically show the sheet size. If you use the ansi sheet sizes it works great. However, if you use the variable formats it shows the dims and not C or Arch_C it shows 24" x 18".There is not current way to automate this since Creo does not have the Architectural sheet sizes in the default list nor do drawings have the ability to store relations on their own without a model.We would like to have the Architectural Sheet sizes added to Creo.Also, like the idea about the Architectural Scale options to be added. Architectural Scale
Now is possible to use any general scale of the drawing module in Creo Parametric and people have to write it manually. There is two bad moments:1. User have to remember all right scales;2. User can mistake - use wrong scale (1:3 for example). It will be great to have drop-down list (restricted vals) for fast and easy use right scale. Of course possibility to use any value of scale must to exist also.Let's make software conviniently and easy to use together.
Currently in Creo 2.0 you can define many sketches that can be used to create an extruded feature. The only way to change which sketch is used for the extrude is a manual redefine or reroute. I would like to be able to use a parameter to control which sketch is used for the extrude feature. This should work similar to parameter used for patterns by table. This would give me the ability to write relations to control the parameter for different situations and reduce user input. This will greatly reduce time and improve accuracy on designs. Do not limit this to just extruded features, apply to ALL features that can use a predefined sketch.Please vote for this if you think it is a good idea to improve Creo.Thanks
Greeting, This is an enhancement idea for Creo Lathe function. Currently, there is no indicative sign or forced action for “Clearance/ Home point setting” in the Creo NC lathe function. If users don’t set up “Home point” then collisions will be happened 100% while changing cutting tools in all sequences. There is why I made this video to warn this issue.
More often than not, "identical" is the best pattern option for features we create. If the feature does not have any variable options then it should default to "identical". This will eliminate people having to remember to change this setting.
Proposal: We need a functionality to set Creo Drawing Table editing source as MS Excel sheet.This is just similar like in Creo part/asm module, pattern feature editor can be set as excel sheet instead of Pro/table.Reason:In Creo drawing, we need to create table with at least 50rows X 10columns as shown in figure manually.Editing this table is really a cumbersome task since, ONLY one cell can be edited separately.No recurrence operation can be done here.Bringing .csv file via “Table from File” option also results in raw data result as shown in fig.Regards,Siva.A
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.