Recently active
Hello, I am a student in Mechanical Engineering and I am looking to make a so-called hypoidal pinion.I want this pinion to be parametric, I have already done 90% of the work but I am stuck.I am trying to find a curve that allows me to start from the top of the cone to a pitch circle where the tooth of my pinion is defined. This curve must have a BETA parameter that allows me to manage the inclination of the teeth. The problem is that my curve goes too far, and I don't know how to limit the h factor in my equation, as you can see here ->My curve must take into account the following parameters (I think):Spiral angle (β): This is the angle of the spiral of the tooth.Pressure angle (𝛼): This is the angle formed by the line of action with the transverse plane.Base radius (𝑟𝑏): This is the radius at the base (primitive) of the cone where the teeth begin.Module (𝑚): This is the measure that connects the distance between two consecutive teeth on the pitch circle.Taper angle (𝛾):
Hello, community! When I import a stl file, I have no way of knowing whether it is closed (other than the visual search for a green colored hole). Is there a simple way to ensure that the imported STL file is closed? I appreciate the responses in advance.Thanks
1. What product and version are you running?Creo Illustrate 11.0Windchill 12.0.2.142. What is the issue?A routed system is associated with a part.This system has several representations, each one representing a different path in the assembly.Only one of the representations is associated with the part as the responsible one, usually the flat representation that shows the total length of the routed system.The representation brought into Creo Illustrate is always the one associated with the part as the owner.How can I choose which representation is displayed in Creo Illustrate? Would it be possible to select another one without changing the association between the CAD and the PART?3. Are you using a workaround? If so, please describe it.One alternative would be to change the association by selecting the ideal routing as the owner, but we face some challenges with this approach:By the time the illustration is created, the part is already in a state where changing the association is not all
Hello, There was a function ProPtntbl_remove_instance() in Pro/Develop. What is the equivalent function for this to remove instance from Pattern Table using Toolkit. Thank You
Hello,my new laptop doesn't have an ethernet plug with its own Physical address, and depending on where I work I plug it into different docking stations which have an ethernet plug and their own physical address.I have a nodelock license, so which Host ID should I enter into the licensing page?Right now I'm at the office plugged into a docking station, and cmd-ipconfig shows my host id is 30-13-8B-EF-C2-A9.When I start the Creo installer it shows the same host id. So I get a license file for this host id, load the file in the License window, and I get a Not suitable error.I contacted PTC licensing support and the seem to be clueless on this issue, any ideas or possible solutions?Thank you!Guido
Hi, im working on a university project and new to the whole top-down design game.I have already created a sketch and some datum planes in my skeleton model. (I have many variables, so there is a lot of references).Next, I have published some of the sketches as a publish-geometry, so i can use it as a sketch for my parts which will be part of my assembly. Now Ive got the problem that i just cant get the copied sketch to work like a normal sketch for revolving or extruding parts. I have already tried moving the copy-geometry around inside of my model tree (main assemby, subassembly, part), but the only way I could imagine using the copied sketch as a revolve/extrude sketch is by referencing every single line inside of my copied sketch and using it to make a new sketch, which just does not seem rigth. Sadly, I also cant find any tutorials on this specific problem, because everyone uses the copy-geometry feature for already existig parts and not sketches.Bonus question:
hi,I have creat a mapkey in the 3D model,but when I work in the 2D model,the mapkeys do not work,
I'm running Creo 9 and there is an option to merge bodies. Is that not possible in Creo 8? ----------------------------------- (Note from the Moderator: this question was a comment, moved from this Creo idea)
Is there a way to regenerate the part model and assembly using ModelCHECK SAVE mode? is there a way to confirm whether the model is regenerated or not?/ family table is verified or not?/relations is verified or not? using the ModelCHECK save mode.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?As a PTC partner all our Windchill customers are running different Creo View versions. In this case we run Creo View 3.0 to 10.02. What is the problem?A lot of our customers are experiencing troubles when making measurements in Creo View as it's not an easy to use tool to make quick measurements. Certainly when the customers is having large assemblies.When making a measurement into an assembly, the user should select first the part, then the reference, then the other part with CTRL and the reference. Then you have a measurement from one plane to another for example. This takes already several clicks which is not easy to explain.The struggle is real when the measurement needs to be in a certain direction or with a certain path. (Angled direction for example).I motivate a lot of my customers to use Creo View as the tool in the assembly, purchase, ... but we mention not m
Hi guys,some weeks ago we moved from onprem Atlassian Wiki Atlassian Cloud. To improve the user experience we implemented Microsoft oauth as SSO. This is working fine for all browsers but not for the embedded chromium in CREO 9. Here the browser always loses the cookies after starting a new creo session and the users have to re-login with MFA...Has anyone out there a similar experience or any hint for a solution?Thanks for your suggestions.
1. What product and version are you running?Creo Parametric 9.0.8.0Creo View Adapters 10.1Creo View 9.0 2. What is the issue?To illustrate decals on machine's CAD model, we follow these steps:1. We create a part (.PRT).2. We create a Fill.3. We create an Appearance for the decal as a Decal --> Image (PNG).4. We apply the Appearance to the Fill.5. We apply 100% transparency so that the edges of the Fill do not appear on the decal.6. We check- in the part.7. CAD Worker servers receive a request to generate a representation that can later be viewed in Creo View.8. We realize that when 100% transparency is applied, the representation is not generated.9. If we do not apply transparency, the decal is generated correctly, but the edges of the Fill are visible. 3. Are you using a workaround? If so, please describe it.We explored the three scenarios below:Design the decal using transparency:This is the current process; however, it does not generate a representation for viewing in C
Hello everybody,in creo 7 do i have the possibility to directly put on the table the single bodies of a multibody part?do I have the ability to shot the bodies? Do I have to extract the parts and redo an assembly? Thank you,Matteo.
I am using Creo Schematics Release 7.0 and Datecode7.0.0.0Not able to map the path which I want to use for Central Catalog and Temp SubmissionHere are the errors that I facedGetting network error
Welcome to Third Angle, where today we’re diving into wave power technology. To hit net zero targets around the world, we need to harness the power of nature and smart technology. In this episode, we learn all about CorPower Ocean, supported by PTC's largest partner, PDS Vision, who are leading the way with a wave energy system that balances supply and demand without needing as much generation capacity, storage, or grid infrastructure. Our producer, Benoît Derrier, visited the company's testing center in Stockholm to see their latest prototype in action. He also spoke with Jacob Ljungbäck and Antoine Bonel, two of CorPower Ocean's talented engineers, who shared some amazing insights into their groundbreaking tech and its potential impact on renewable energy.
Hello everyone,I'm not an expert Creo View user and I'm trying to find a way to obtain the minimum-size enclosure that contains a Creo part or assembly (or imported STEP files). In Creo Parametric you can set the Enclosure feature to "optimized" (from 11.0) or orient it according to a selected CSYS.I couldn't find a similar option in Creo View: when using Markup > Measurements > Envelope, the bounding box is always created according to the default CSYS. In the attached picture you can see a practical example where my part's CSYS is not oriented according to the minimum-size envelope/enclosure.Am I missing something? Thanks.
Why can I not move the yellow highlighted item to below the datum planes in this assembly feature tree? Using Creo 10.
Hello,Creo Parametric 8.0.6 I've created a mapkey to export dxf file and save drawing/part parameters then use vbscript to rename the dxf file, the mapkey works great in Creo but when i use distrubuted batch to export dxf using this mapkey it will only export the first page, is there a way to loop this for all pages in a drawing? Thanks,TTD <TTD version="1.0" created_by="PTC"><DESCRIPTION>Run a mapkey defined in a config.pro</DESCRIPTION><GROUP>Misc</GROUP><DETAILS>Will be run on any file type; user is responsible for choosing types that mapkey will operate on correctly.</DETAILS><SERVICE name="dbatchs"/><FILTER_FILE_TYPES type=".drw"/><!-- Replace "F1" with chosen mapkey when customizing file --><TKFUNC func="ProMapkeyRun" mapkey_key_sequence="dxfdet"><save_model>false</save_model></TKFUNC></TTD>
1. Describe the ProblemWhen creating an offset plane, where you have selected an surface/plane to create the offset datum plane from as the first reference and then select and edge as the second reference, it jumps to the angled (offset) plane, and then you have to change it to parallel to get a parallel offset plane that is through the edge. If the edge selected was a point it works fine and the plane stays parallel.. What would be nice:If reference 1 is the edge and reference 2 is a plane/face it creates an angled plane.If reference 1 is a plane/face and reference 2 is an edge it creates a parallel plane through the edge.2. Are you using a workaround?manually change the plane option from offset to parallel3. What is the use case for your organization?when creating a parallel plane through an edge reference4. What impact does this problem currently have on your organization?more clicks to make a plane
Currently running Creo Parametric 7. I'm trying to auto-populate a repeat region. In this assembly, there are two cases:1) XXXXXX-XXXXX-000, where "000" is the component find number. This is a parameter automatically generated at the part level, and can be called via relation asm_mbr_fn2) The second case is a manually entered find number at the assembly level. This can be called via asm_mbr_cparam_find_number These cases are mutually exclusive, i.eParts that fall under case 2 do not have an automatically generated asm_mbr_fn,Parts that fall under case 1 do not have a manually entered asm_mbr_cparam_find_number The components that fall under either case also have a specific naming convention. (see "YYYY", "_XXX" and "_YYYY" below) Here is the relation I have written - but it is not working correctly, specifically the second IF statement is failing. Those cells in the table are blank. The first IF statement works just fine - it correctly populates the part
I want to fill the symbol square with white and make the text ABC black. 1. What product and version are you running? Creo Parametric 9.0.8.0 2. Are you having issues? I want to fill the symbol square with white and make the text ABC black. I tried hatching and filling, but the text became the same color and became unreadable. 3. Are you using a workaround? If yes, please explain it. No, there is no workaround. 4. What is the use case for your organization? Explain how your idea works in a disruptive environment or how it applies to a real-world situation. 5. How is this issue currently impacting your organization? (number of users affected, lost productivity hours, etc.) I'm using the Toolkit to place symbols, but when I place the symbols on a model in a drawing, the text inside the symbols becomes hard to read. Currently, I manually adjust the symbol position after placing the symbol, but this is time-consuming due to the large number of targ
Hello all, I am saving a step file using ProIntf3DFileWrite() but I lose all colors assigned to parts and features. They are all set to grey by default. Is there any setting/config options I need to change before saving the model? Or any alternative method to save .asm/step file without losing colors assigned?
I'm working remotely today trying to retrieve a rather large assembly. My Creo home directory is a mapped server drive sitting at HQ. Not recommended I believe but that is our current configuration. When I retrieve this assembly it looks like randomly named temp files are being written to my home directory, causing this retrieval to take a long time. See circled in the attached. Knowing this setup is not the best, why are these files being written and what can be done until we can convince our IT people to put our home directories local to our laptops? Creo 8.0.0.0, Windchill 12. Thanks..
I can't open my Top assembly file, I applied a few notebooks for my design (Model and Assembly),I found an error message below the message log bar: "All notebooks referenced by model A will be retrieved". I tried to fix this by undeclare the notebooks in this model but it still happens with the otherIt just happened 1 day ago, before I could open it normally. Do you have any solutions for this such Crashes
My colleague is working on a large assembly. He puts the model into an isometric orientation and saves it in the model with that orientation. Then he places a view on the drawing and picks that saved orientation and the model is rotated in the drawing view. I have reproduced it on my machine with a brand new blank drawing. Both the model and the drawing are the same rep. There are no family tables at this level. Has anyone else ever come across something like this? Any ideas? If no other ideas, we will just dial it in with rotating about references until its close to the iso in the model.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.