Recently active
According to SPR 1956247 and behavior that we've seen, datum axis display can no longer be shown in a drawing in Creo 3. According to support, this was causing performance and visibility issues with many customers. They recommend to just use SHOW MODEL ANNOTATIONS.My product improvement idea is to at least make this a little more consistent:In the View Ribbon, they should remove the axis display button and axis tag display buttonIn the Display bar, they should remove the axis button display and from the All datums display button.
I have a case I want without the display of the "Locally Modified". Please look at the file.
Harness parts are difficult to identify just by seeing its number/name, unless we try to open it in creo.Create a different extension or sub-category, which will make sure that its a harness part, before we try to open it in creo.
We would like to be able to output the results of a ‘recorder’ file (in CED Modeling) as a generic viewable (i.e AVI, mp4 etc…) - similar to some form of screen capture function,
Often I create workspaces with similar names. It would be nice if there was a created on column in the dialog box to help you figure out which one is the most recent if you have been away from them for a while.
I appreciate that this request falls in the Parametric/Family table 'use model', however, as a 'Product Idea' i thought I would raise it, as it maybe perceived at PTC as feasible/possible. We would like a physical relationship between a Stock part (i.e a casting) and a finished part (i.e. machined casting), so if a Cast is modified, the related finished parts, could be automatically amended as well (i.e. a logo change embedded into the cast) I am aware of the Stock/Finish relation function, but would like to request that this functionality be extended to the physical shape also.
It would be nice if the system would automatically assign the proper material crosshatch as defined by ASME to the model when the material is assigned. When a cross section is then applied to the model, the proper section lining will be automatically applied. The section lining could be an added line to the material file that Creo would read.
Many of our users keep on forgetting to change the Search in: field from All Products to All Libraries or All Products & Libraries when trying to search for library parts. It would be great it there was a setting we can control that would default the field to All Products & Libraries. Thanks!
Make deletable the scale note from a detail view in Creo Parametric drawings
Prior to WF3? you didn't have to explicitly right click and choose save after defining an explode state. Now after defining / editing an explode state, there is a + sign that appears. You have to remember to right click and choose save for the explode state to show up in a drawing. I think the change was made because of the introduction of combined states.I would suggest this be a config option.
When creating a odinate dimension and set the display to Basic. The box around the dimension is overlapping the dimension line.When a Basic dispay is used the dimension should move up so it is free of the line.
I would like to propose the idea that when you double click on an item in the Model Tree in Creo Parametric it will zoom to that feature or component. Currently, in an assembly if you double click on a sub-assembly or part it will expand to show components or features (if being shown). If you click twice on a feature (not quickly) to get to rename the feature, but if done quickly it will do nothing. In Creo View, the behavior is to zoom to the component when you double click, which the users here really like. Since these two pieces of software are in the same family (by name), I would like to see some of the basic features be the same. I understand that these two pieces of software serve different functions, but all the users see is inconsistency. They do not care about being two different platforms for different purposes.
Need the ability to reorder a component's position in the model tree while in insert mode to a location in between suppressed components of to the end of the model tree.With the example below I would have to cancel out of insert mode then drag the highlighted component to the end of the model tree and then go back into insert mode.(Note: it would be ok if when the component is reordered if it is suppressed temporary by the insert mode)
Re-architect Creo WGM CAD Document based on soft-type/sub-type rather than attribute called document type or document sub-type. This shall allow to tightly integrate OOTB functionalities such as ACL, Policies, OIR, Numbering Scheme, Lifecycle/Workflows with object type. This shall provide more generic solution.Use case:Currently Creo Formats, Assembly, Part etc. are persisted as EPMDocument type with authoring app as Creo/Pro. Attribute called "document type" differentiates between each of the formats. So, all Creo Formats/Assebly/Part are driven by same Lifecycle/OIR and ACL etc. Usually Formats are managed under Library where they're rarely changed. So if we want to put in policy not to be able to create/check-in Formats in a Product level, that's not possible using ACL/Policy (without customization).Making WGM CAD Type as sub-type of EPMDocument shall allow to apply various business rules/policies more flexibly without customization.
I would like to have functionality at the same efficiency restored in the Creo UI to control system colors. This is the WF5 drop down and the initial selection has been removed in the Creo UI. You now have to explicity provide a path to a syscolor file and read it in to set up the system colors which takes much longer than a pick in the drop down menu. A mapkey is a workaround but mapkeys are not supported in new releases as the UI can change and they must be rewritten. I would like to get the scheme pick menu functions put back in the UI.
If you load a pkt or pk2 you have the possibility to select the desired position of the part in the Model.Simply check/uncheck "Position after Load".When "importing 2D to work plan" that is not (yet ) possible.The Geometry is loaded allways with her 0,0 point to the 0,0 point of the workplane.It would be handy if you load for exemple your 2D geometry tools from your personal database and they could be positioned directly to the desired location. Like it is possible in Drafting. There the Default is to select a position for the loaded Geometry or you load with the supplementary option Absolute then 0,0 goes to 0,0
Until now it is not possible to place a Parameter as a notice on a drawing Format which will be filled automatically.It must be allways placed in a table. If it is placed in a table, the outerlines of the table can´t be made invisible.
Saving 3D PDF files, we cannot set the ligth setting, so when a user opens a file "light from Model" is chosen, and they must uncheck that everytime. In Creo pro, you can controll that, it would be vey good if we also could control light settings in Elements Direct, today the options for export is limited
In general, the Ribbon and Quick Access toolbar should consist of tools / functionality appropriate to the current mode of working (in a part, assembly, drawing, etc.). There is an independent need to be able to do many things in all modes that are facilitated greatly by mapkeys. The mapkeys are available in all modes from the keyboard. Ideally mapkeys are made available from custom tabs / groups on the ribbon / quick access toolbar - and these (only) should be availalble in all modes. One may want to create a new Part for example while in any mode. Same for setting system colors, etc.So - The request is to allow for a specific (ideally admin-controlled) ribbing / quick access element that can be configured once and available to all modes.
Manufacturing: Comment in sequenceI want to change, without confirm the change.I think, the way to do that now, is not the best way, because I have no control, that the change is really done. It's to easy to forget to push the confirm button.Bernd
Manufacturing: CL-Command change have to confirm - Why?I want to change, without confirm the change.I think, the way to do that now, is not the best way, because I have no control, that the change is really done. It's to easy to forget to push the confirm button.Bernd
To get references of detailed views automatically updated when adding Break view from full viewCurrent Bhavior:Losing references of detailed views when adding Break view from full view.
Sketched curves with hatches are useful in 2d (drawings) but slow down the performance in large assemblies (3d).There is an option to hide those curves, but that does not affect the hatching (see screenshots).So what you get is a useless view with poor performance.Since there is already a function that pretty much provides this function ("Temporary shade") it would be nice tohave an option to fix this behaviour. "Temporary shade" has to be keyed in over and over again.
Add a "Erase View" option on right mouse click in the drawing mode!You have a "Resume View" option on right mouse click, why not an "Erase View" option?!?!?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.