Recently active
1. Describe the ProblemOvertime our Windchill library of Creo objects has grown and has introduced duplicate or invalid models. We have been proactively renaming our non-standard library parts with a standard Prefix (ie. BAD_) so users understand for newer designs which models not to use. We are looking for a way to notify users that their existing assemblies are using these "BAD_" child parts/assemblies. ModelCHECK currently has a check for file name in an assembly, but that check only checks for the immediate assembly and does not look at child part file names. Would want a way to identify invalid name/filenames within an assembly. Possibly an option for Top Level versus All Levels of the Assembly.2. Are you using a workaround?Current workaround is to manually look at file names in the model tree to identify invalid Model Names.3. What is the use case for your organization?Will allow us to more easily implement a standard library into our existing assemblies.4. What im
It's currently only possible to use ModelCheck REGEN_DIMS to check for broken drawing dimensions in ModelCheck Regenerate (flavor of Interactive mode). Please allow this check to be used in all other ModelCheck modes (Interactive, Save, Regen, Batch) as it would helpful to check for drawings with broken dimensions in all modes.
In ModelUpdate, in interactive mode, the PRT_DATUM_RENAME setting should be work automatically (without user select)
To increase the overall model quality, we would like to prevent incompletely regenerated models (traffic light status is yellow) from being checked in to Windchill. Therefore it would be very helpful if there were a ModelCHECK check (see also PTC article CS39546). As of today, only the config.pro setting "regen_solid_before_save prompt" can be used to inform users about incompletely regenerated models when saving. However, since we also use the config.pro setting "dm_auto_conflict_resolution yes" to suppress annoying and superfluous conflict messages from Windchill, the setting "regen_solid_before_save prompt" does not work for us either, since this message is also suppressed.
New function in ModelCheck, delete all emty layer in the prt, asm and drw mode.
1. Describe the Problem Users are able to assemble new parts or assemblies into an Inseparable Assembly. This defeats the purpose of making the assembly inseparable. I want a config option to disable this. We have created the image below for our internal documentation. 2. Are you using a workaround?The workaround is creating documentation for the user to tell them not to do it. (see picture above). This is not a good solution as it is way too easy to find the assemble button in Creo. 3. What is the use case for your organization?It doesn't make sense to add components into an inseparable assembly while it is the inseparable state. It basically makes it not inseparable. Need a way to prevent user from being able to assemble. 4. What impact does this problem currently have on your organization?We have experienced issues with the Windchill Structure being corrupted along with very long Publish times in the publisher when checking in an assembly with this conditio
Suggestion: if you select an edge of a part, it should be possible to show the length, radius, diameter... of it automatically in the status bar without starting the analyzing tool. Also the distance or angle of two selected edges, surfaces should be shown automatically in the status bar. In most cases this is sufficient enough. If you have to do more complex measurements you can start the analyzing tool.
1. Describe the Problem Currently there is no native functionality to pick multiple files from the file open dialog box for opening like there is in other widely used software programs. There is a way to open multiple files if you are starting from a workspace but not from the file open dialog box. 2. Are you using a workaround?Using mapkeys, opening one at a time.3. What is the use case for your organization?The functionality should work like Microsoft Office Products. You can CTRL select to select multiple individual files or SHIFT to select range of files. The functionality should work conjunction with the search in the upper right corner. You search on a prefix, suffix and then from that filter you can then SHIFT select multiple files to open. For files like STEP files that require dialog boxes upon open, it should work the same way and just present the user with the dialog boxes in succession as each is opened.4. What impact does this problem currently have on your organiza
1. Describe the Problem Reference: Ticket - 17887046 Article - CS143895 We would like to leverage some of the amazing modules within Creo, like the Intelligent Fastener Extension (IFX). However, when we use it, the undo and redo stacks clear and users lose this basic and necessary functionality just by using this 'nice-to-have' module. This is because any toolkit program clears the undo/redo stack. There is another idea listed in the article regarding getting the Undo/Redo to not clear for toolkit programs. This idea is slightly different. We believe that packaged modules, like IFX, which use toolkit, should be evaluated separately and approved to leverage the undo/redo, after going through a certification process to ensure that the backend code will behave as expected without any unknown behavior. 2. Are you using a workaround?No. People may end up choosing not to use IFX due to it having these "side-effects".3. What is the use case for your organization?Using IFX,
1. Describe the Problem Reference Ticket 17885506 We are trying to utilize copper information in our PCB. The issue is that our ECAD Tools (PADS and Xpedition) export copper information differently from how Creo imports it. From a very high level: PTC Supports certain extensions, NOT .idx. ODB++: The standard does not include thickness info, which we would like to have .EDA: Requires a plugin with an extra license for Xpedition. Siemens says the Decryptor file is old technology and not supported. They do not want us to use it. Other extensions not exportable from PADS or Xpedition. Siemens supports: IDX (Industry standard) that PTC does not support STEP: Which created very large step files. They look good, but are hard to manage in the assembly. It makes everything bloated and the process to import just the copper is not intuitive. 2. Are you using a workaround?No3. What is the use case for your organization?Having our MEs review copper information before appro
1. Describe the ProblemIt will be very helpfull to have ability to influence by check-box additional functionality in roun feature:- add side influence- piece to piece(like we already have in boundary blend feature) for example it is like this at the moment: but when both as suggested properties will be possible to get the result should be like this: 2. Are you using a workaround?yes using a lot of new features: curves and boundary blends, then merge everything...3. What is the use case for your organization?very often4. What impact does this problem currently have on your organization?mediate I just like to have nice looking designs
1. Describe the ProblemI work with metric as my primary units and I want to have a dual dimension in inch, but to make secondary dimension (inch) format in fraction while primary dimension (mm) in decimal. As the configuration dual_metric_dim_show_fractions does only work if mm is in secondary dimension.I think the easiest solution here is to make that configuration not only for mm in secondary dimension but as a general for any unit as a secondary dimension, (and maybe can be named dual_secondary_units_show_fractions ?)2. Are you using a workaround?it's impossible unless I do a work around by: 1- changing model dimension to be in inch 2- make my drawing_units = inch 3- dual_dimensioning = secondary[primary] 4- dual_secondary_units = mm 5- dual_metric_dim_show_fractions = no3. What is the use case for your organization?Main working units are in metric but manufacturing works by imperial, so main CAD must be in metric while working drawings needs to be dual dimensioned in inch
1. Describe the ProblemThe sheetmeal module is Creo is amazing. Ive been teaching sheetmetal classes since 1992. < I like to spell sheetmetal as one word probably because Pro/SHEETMETAL established the legitimate compound word. Designers typically use the Creo Sheetmetal module to preform little debbie type of box folding type of design.One recent class to industrial designers it was inquired if there was a module like sheetmetal that would allow for specifics for folding boxes like a Little Debbie box and work on specific layout etc. I know there are specific software for folding boxes. I would refer to this module as sub module. Maybe it works with surfaces and allows those surfaces to flatten. In this case those tools already exist but maybe not meant to help designers work their magic on working packaging in this specific instance. Fusion 360 even has a PCB sub module under it's sheetmetal functions.&nbs
Posibility / configuration option which checks periodically Creo Parametric objects (sketch, part, assembly, drawing, etc.) in memory and saves changed ones with respect to user settings into working directory or workspace or only displays warning message.User can:enable/disable this functionalityset time of period and set checked object typesThanks,Vladimir
1. Describe the Problem Currently (Creo 11.0.5.0), when latest STEP protocol is selected (ap242_e3), it is impossible to exclude parameters from export to STEP. This is a problem, because parameters can store proprietary, or confidential information. This feature works just fine, when older protocol (ap242) is selected. I would like to get this functionality implemented, for ap242_e3 as well. I tried modifying .dep_step file, but it doesn't work. 2. Are you using a workaround?Selecting "Designated only" does not satisfy needs of the company. We need a config option, so the parameters are excluded automatically by the converter.3. What is the use case for your organization?Generate STEP files without proprietary or confidential information.4. What impact does this problem currently have on your organization?This issue might raise some legal concerns, or lead to sharing technical information by accident.
1. Describe the Problem user should have ability to replace/reselect failed references in remove feature like in this example: current functionality is very limited here! User can only delete wrong references or all... Standard selection with <SHIFT> (up to boundary) should be accesible here 2. Are you using a workaround?no for current functionality it is necessity to monually click them all...3. What is the use case for your organization?very often4. What impact does this problem currently have on your organization?I increase my design time almost every day because I use this feature so often
I create an exploded state in assemblies called A.asmI create an exploded state in assemblies called B.asmI want to create an assembly called C.asm in which I insert A.asm and B.asmI want to directly create an exploded state in C.asm which is the result of the exploded state of A.asm + B.asm
1. Describe the ProblemCurrently it's not supported by Pro/TOOLKIT to do also a "Revise" beside a Checkout of an object from Windchill using ProServerObjectsCheckout() like it's written in Article - CS254712 - What Revise and Check Out options in Windchill PDMLink are supported by Creo Parametric customization.2. Are you using a workaround?The user must do the checkout and revise manually via e.g. the CREO-conflict-window.3. What is the use case for your organization?We've a synchronous Pro/TOOLKIT application that supports the user performing multiple tasks. Because CREO is blocked during the application is open, it would be good to offer a possibility to do not only a Checkout but also a Revise that the user can stay in the Pro/TOOLKIT application during this action.4. What impact does this problem currently have on your organization?A lot of users are affected which makes the work more inefficient because the "Checkout and Revise" action needs to be done manually and canno
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.02. What is the problem?Currently Creo users cannot copy Multiple geometry in single attempt.3. Are you using a workaround? If yes, please describe it.yes.. we can copy one geometry at one time. Which is time consuming4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Improving Productivity5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Aprox..150 users
1. Describe the ProblemWe are not able to edit the end location of the cables when using auto routing.The exported XML files from Creoschematics tend to gray out the options, which makes it hard to edit to change end locations.When using manual routing we can edit the locations.So, requesting to check if it’s a bug, or if it is how cabling works, or if this can be provided as an option. 2. Are you using a workaround?There is no workaround.3. What is the use case for your organization?We are using "Auto Routing for Peumatic Design, Here, we need an option to add a Location point.4. What impact does this problem currently have on your organization?Around 200 Users
1. Describe the Problem In the Creo Drawing Place, the MARKING Symbol pointing to "Hidden surface (according to standard)", When pointing to the Hidden Surface in the drawing, the Leader Line must be in "Dashed Line" 2. Are you using a workaround?Yes, place the symbol without a leader line, draw a line between the hidden surface and the symbol, and then change the line type to "Dashed." This is a time-consuming process.3. What is the use case for your organization?In the Drawing, the Hidden Surface must be shown with a Dashed Line Type.4. What impact does this problem currently have on your organization?More than 2000 Users.
Description:In Creo Parametric, ordinate dimensions created within sketches are not available for reuse as annotation elements in Model-Based Definition (MBD). This limitation forces users to recreate dimensions outside the sketch, which introduces a risk of tolerance mismatches between the sketch and the annotation. This can lead to serious production errors, especially in high-precision environments.Proposal:Allow ordinate dimensions from sketches to be reused directly as MBD annotations, similar to how driving dimensions from features are handled. This would improve consistency, reduce redundancy, and enhance safety in the design-to-manufacturing workflow.Use Case:Mechanical product development in automation systems, where sketch-based ordinate dimensions are critical for layout and manufacturing accuracy. It is also highly beneficial for complex parts, where ordinate dimensioning improves readability and reduces interpretation errors.
1. Describe the ProblemWe spend a lot of time selecting the same settings within the Creo due to the fact they revert back to the default when the feature is closed. In most, if not all cases the default is not used which forces us to re-pick all settings for the next use of that feature. If all settings, you modify were to be retained until you change them or at the least until the file is closed, we would be able to reuse that feature as intended. This would eliminate many clicks throughout the day. This is a common approach with other software and actually is sometimes the case within Creo (Round dimension is saved until changed). One example would be the steps below to create a hole for an insert. Once the hole tool is closed these settings are reverted back to default. Often, we reuse the size or one close with most settings the same. 1. Select hole button,2. Select standard,3. Select countersink,4. Select hole type using hole template,5. Select s
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 11 2. What is the problem?Unable to use customer specific mapkeys without loading ALL mapkeys.3. Are you using a workaround? If yes, please describe it.Currently in versions prior to Creo 11, we put customer specific mapkeys in a localized congig.pro. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.I would like to see a config.pro setting to point to a local mapkey file that can be used for customer specific mapkey settings that are different from the default ones.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Impact is about 10 minutes for each time we may need to restart Creo after switching/renaming the mapkey.pro file for each customer.
1. Describe the ProblemWhen some of the features fails, it will be great to have ability to preview what is wrong in the feature as preview -> when point and highlight the feature (just in model tree user can see immediately the preview as same as when normally enter to edit definition and see what's wrong, but improvement here is to see what's wrong without entering feature's definition at all (it allows user to easy decide which features can be e.g. deleted).2. Are you using a workaround?user can see what's wrong or missing references etc. when enter into edit definition3. What is the use case for your organization?very often4. What impact does this problem currently have on your organization?efficiency and productivity
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.