Recently active
Reference viewer currently will not display while dimensions are on the screen for editing.
You can Isolate a Layer, primarily in assemblies, so you only see the objects you are working on. However, there is no "Unisolate" command. In order to bring everything back, you have to either Reset Status or Hide the isolated layer. This is not intuitive. I would suggest either making an Unisolate command available from the Layers icon above the Layer Tree, or have the Isolate command from the Layers drop-down icon checked, and selecting the Isolate command would make that layer no longer isolated.
I do appriciate the new functionality 'Transform Owner' in Modeling 19.0 with the position command that selects the entire assembly when all of its parts are selected, but i think it is anoying that all edges are displayed in cyan, i would like to de-activate it.currently there is only the setting to change the color of the highlighting not to deactivate it. this should be added to the settings.
At the moment, the shadow analysis allows to select a part that create a shadow on a surface assuming parallel rays normal the selected plane.It would be nice to select a point (Light Source or Eyes), a target surface and an object (creates a shadow).At the moment, I have to create many many features to get a somewhat good of a results.
1.) Standardize the names. The config options that relate to directories should be prefixed dir_ Presently not all of them even include a "dir" as part of the name, and (remarkably search_path_file specifies a directory containing the file search.pro) This means that an admin can sort on config options that affect the system architecture. The paths are independent of the function of their contents and should be easily segregated 2.) Have a config hierarchy There are dozens of nc directory related config options, even though they could all have the same value. There should be a higher level option that supply the default for all the subordinate options. If one of those options needs its own path, then that config can be set; if the high level option is set in the config.sup, then no subordinate options that are set after that can be used. This way a few configs control the approximately 100 configs that alter where files are located. 3.) Prefix config opt
A geometrical tolerance with leader can be placed with 2 different procedures.1. procedure: Condition: "Tangent Leader" or "Normal Leader" and placement: "On Entity".2. procedure: Condition: "With Leader" and placement: "On Entity" or "On Surface".A symbol with leader can be placed with following procedure.Condition: "With Leaders" and placement "On Entity" or "On Surface" or ...Following problem exists: Neither a geometrical tolerance nor a symbol can be placed with a perpendicular leader on a surface (like shown in the picture below).It would be great to have following procedure available in Creo:Condition: "Tangent Leader" or "Normal Leader" and placement: "On Surface" (see picture below).Thanks in advance for the considerationBest RegardsKnut Schäfer
It should be possible to change the font for Annotation datums and symbols that are used in Creo Elements/Direct Modeling (Annotation), in the same manner that you can set the font for all other elements that are put onto a drawing.
In Modeling>Part/Assembly>Unshare Onelevel can be selected. Next time the command is called this setting is gone. It should be stored persistant when Onelevel is selected once.
Current functionality is for the program to ABORT when trying to replace a component by program when the component was placed using component interface but component interface is not in the interchange assembly. All the references which are used in the component interface are in the interchange assembly. You can manually replace the component by interchange, you are just presented with a dialog box that says: "Component Interface missing, continuing placement will cause interface to be removed" "Yes or No" If you select Yes the component is replaced just fine with ALL references in place. I have many library components that don't yet have interfaces defined. I have started adding interfaces to library components to take advantage of them, so users are using them. It is VERY frustrating to users when the program regeneration ABORTS, they lose previous work.Please provide an option to allow the components to be replaced by program without aborting.
I don't know exactly how to state this. Users become very frustrated when functions don't work to their expectations. I know this is a training issue, but I believe PTC can make things more intuitive for the users. In my picture you will see two dimensions in the "top_3" view in drawing tree. User wants those two dimensions to show in the drawing. However as shown in drawing tree the dimensions are erased or (hidden), there is not an "Unerase" command in the RMB menu. The reason in this specific case is the dimension is on a layer which is hidden in that view. There are other possibilities why the dimensions could not be displayed.Possible resolution:Add a "INFO" to the RMB that would display all information about the selection. Don't limit info to dimensions, other items have same issues, surface finish, gtols, notes, etc..Example: D5 is on Layer "DIMS", Layer "DIMS" is Hidden on Drawing & View "top_3", D5 is defined in Drawing Program state "ERASE_DIMS"Please introduce something
Currently the font in the information, title, and legend cannot be manipulated by the user. For reporting purposes, it would be helpful to be able to manipulate the font as sometimes it is too faint or small to be easily read when put into another document.
Hi I design many embossings and I think brilliant new feature can be "Bump-map emboss feature" which base on grey texture (same like for bump in rendering), will add physical surface mesh deformation.It means if texture is black - the concave is "0" if it is white the deformation reach maximum pointed in the feature parameter.This figure will express the idea in cross-section and below is referenced texture image:of course it should work in UV directions, just like a bump Good reference for this idea can be rib feature:where in option user can set minimum side angle, radius value at beginning and at the top, so in this new feature Creo will calculate all - even if user prepare just white max deformation texture or parametric sketch can be source representing max deformation.Example sketch:Then result can be as follow:will be great also to be able to add rounds at corners:also be able to set the minimum width on the top:next level will be if corner rounds will be no constant, but be res
If you want to perform a measurement function you have always to tell the system first which element is to acquire. First, you have always to enter an option, only then you can select the elementsWith immediate selection of elements you get an error message.The program itself should be able to recognize which element is selected and perform in accordance with the result the measurement.
I want to change the default command of created "split menu".Now need there is to recreate the "split menu".Example
The import function "2D import to a workplane (DXF/DWG)" should have a scale function ---> like add image to workplaneDie Importfunktion " 2D in Arbeitsebene importieren (DXF/DWG)" sollte eine Skaliefunktion haben --> wie bei Bild zu Arbeitsebene
The "pull function (liniear/angular)" should have the option --> Move workplaneDie "Ziehen Funktion (Linear/Abgewinkelt) sollte folgende Option habe --> Arbeitsebene mitbewegen
Add the option "Circle Center&Diameter" to the new function of temporary constructionlinesZusätzliche Option " Kreis Mitte Radius" als zusätzliche Option bei den temporären Hilflinien in den Zeichenbefehlen
It might be possible to deaktivate the Auto Placement / Min Space for a short time --> Option on right mouse button or as button on keyboardEs sollte möglich sein den gesetzten Mindestabstand in der Automatischen Platzierung der Maße kurzzeitig zu unterdrücken --> Auf Rechter Maustaste oder per Tastenkürzel
It might be possible to create variable chamfer like blendsEs sollte variable Fasen geben ähnlich den Verrundungen
If i change the colour/linetype of a geometry/constructionline in the workplane settings it should work on the aktive workplane ---> not only on a new workplaneWenn ich die Farbe oder den Linientyp für Geometry/Hilfslinie in den Einstellungen für die Arbeitsebne ändere, dann sollte diese Einstellung direkt auf der aktiven Arbeitsebene funktionieren und nicht erst auf einer Neuen.
If i move a part or assembly in another assembly and the name already exists the part becomes a standard name.--->> To avoid a name conflict, p2 has been given the name p1 .It would be better to give the part or assembly a suffix ---> To avoid a name conflict, p2 has been given the name p2.02Beim Verschieben eines Teils oder Baugruppe in eine andere Baugruppe bekommen diese einen Standardname falls dieser schon existert.-->>Zur Vermeidung eines Namenskonfliktes wurde das Teil in T01 umbenanntDiese sollten lieber einen Suffix bekommen --> Zur Vermeidung eines Namenskonfliktes wurde das Teil in T2.02 umbenannt
When building casting models we are required to have the raw cast model and then carry it forward to a machining model. Currently, we have to read in the material file for both raw cast and machining files, but it would be nice to have an option availble to read in the material files. The default behavior should be not to carry the material file forward.
Create drawing detail option parameter for controlling cross-section arrow length. The cross-section arrow should have this length by default.
I would like to see more frames for text. At the top of my list would be a hex box, like you would see in GD&T to indicate a continuous feature. Another frame I've used would be a parallelogram.Are there other frames you feel are missing?
I wish to edit the 'Section Line' of 'View 3D' belonging to 'Dep View'.※In article CS67918:'Section Line' modifications , has been described as "Specifications".However, Ver17 ( formerly CoCreate,Inc. Ver17.0.0.42) can be modified 'Section Line'.To be able to modify the 'Section Line' as CAD.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.