Recently active
1. Describe the Problem In Creo Simulate's "Analysis and Study" > "Information" > "Model Check,"I would like a feature that issues a warning and highlightsit on the screen if there are components with unspecified materials (PTC_SYSTEM_MTRL_PROPS).Currently, no warning is issued, so if you forget to set the material,you may not notice and may perform an incorrect analysis. 2. Are you using a workaround?Check the analysis results3. What is the use case for your organization?Currently, no warning is issued, so if you forget to set the material, you may not notice and may perform an incorrect analysis.4. What impact does this problem currently have on your organization?Currently, no warning is issued, so if you forget to set the material, you may not notice and may perform an incorrect analysis. Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per thi
1. Describe the Problemit will be great to have ability to just pick some of existing geometry in the model instead manual preparation of necessery geometry reference:it should work like this when I create DTM on this smal surface:here is the result: but if we have many surfaces to replace like here:it can be really time consuming instead of improved version when we will have ti just pick existing surfaces the best more at the same feature (maybe add sets in offset feature) 2. Are you using a workaround?yes in general I use DTM, COPY SURFACE then EXTEND the boundaries to be enough to replace etc.3. What is the use case for your organization?only designers4. What impact does this problem currently have on your organization?time consumingStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the detai
1. Describe the Problemas in following exampleplease add consequtive numbers in this list to help user to pick properly which want to edit2. Are you using a workaround?I must manuallu=y count each feature3. What is the use case for your organization?only me 😉4. What impact does this problem currently have on your organization?not big only I must deal with itStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problem Reference ticket: 17896010 We are working on generating a data model for Windchill PLM and the discussion of what should be stored in Windchill and how it would be stored came up. We were investigating the classification module and the process to enter in data. Since our focus was on maintaining a digital thread, and ensuring no disconnected data, we were hoping that we could map CAD data to the classification module. Unfortunately, support says we can not. By allowing the mapping of CAD parameters to Windchill Classification attributes would allow us to keep the digital thread, but have some data go to classification. 2. Are you using a workaround?No. Any data coming from Creo will NOT be duplicated into Classification.3. What is the use case for your organization?See above.4. What impact does this problem currently have on your organization?It allows us to leverage the benefits of the classification module.Status changed to: Archived 2026-07-06We are archi
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have a modelcheck error for Circular references actually spell out what is wrong and what the loop is. At LEAST using the same words as the .crc file. We would appreciate better wording than the .crc. Currently it just lists the model, which is very confusing and doesn't help much. The Creo 4 notification window doesn't help much in this area as well. We need to move away from the .crc file to debug circular references. Modelcheck AND the notification window should be better used for this. Also see https://community.ptc.com/t5/Creo-Parametric-Ideas/Better-debugging-for-circular-references-besides-crc-file/idi-p/488493
1. Describe the ProblemHello, We are currently deploying MBD methodologies. Regarding these methodologies, in some case we use the feature "move to plan" on 3D annotations displayed from skectches.When we use this feature Z-extension line are created to locate the original position of the dimension.But these lines are kept when we create a 3D PDF from the 3D model. (see attachment)It would be great to add an option to hide these lines.Thanks2. Are you using a workaround?There is no workaround for this issue.3. What is the use case for your organization?For all our MDB 3D models we can use this feature for a better understanding of the 3D PDF.4. What impact does this problem currently have on your organization?The MBD definition and the generated 3D PDF are not correctly defined and some incomprehensions could be done with the 3D PDFStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total num
1. Describe the ProblemThe idea here is to give to the user the ability to turn off the active section while being active in another feature2. Are you using a workaround?very often3. What is the use case for your organization?medium4. What impact does this problem currently have on your organization?not big but frustrating...
1. Describe the Problem I've been mentioning this since 2001 when AI the movie came out. I want to be able to train sketcher for automatic dimensioning. Makes sense esp as engineers make specific habits or dimensioning habits 2. Are you using a workaround?Of course.3. What is the use case for your organization?Speed efficiency is the main use case.4. What impact does this problem currently have on your organization?Zero.
1. Describe the ProblemIm extremely passionate about Creo and how incredible the tool is. The development is aggressive and exciting. With that said like all of us we do have ideas for further enhancements. One of the design engine precision laptops has the RTX5000 card. Never skimp on graphics cards says one Dell industrial designer. When comparing a machine w/ RTX2000 vs RTX5000 one will notice the sketcher lines or curves are so extremally faint. It would be my suggestion to allow a UI to adjust the weight of the line type *PTC calls font incorrectly. It's great we can change the color or the line type. We need to be able to change the weight. SolidWorks lets users do preform all three. I can provide a video if necessary. Bart Brejcha designengine.com2. Are you using a workaround?Use my glasses.3. What is the use case for your organization?in surface modeling I teach participants in c
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Schematic Version 112. What is the problem?In the "Catalog Explorer, there is no option to Search The Catalog Symbols3. Are you using a workaround? If yes, please describe it.No, Workaround is not available4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We have several symbols in our Catalog, it is very difficult to expand the folder and search to find the right symbol..5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)30 users, Per day around 5 users
Creo Modelcheck has no simple functionality to check the 3D model and say if it's a solid or not. I can't believe that this check criteria is not a product specification for Creo Parametrics (see CS336589). The existing SLA_INFO checking is not working. Here the explanation from PTC: "although the model obviously has mass properties (so to say Solid YES) at the same time it sometimes cannot be fully triangulated like an ordinary solid (SLA_INFO NO)." Please vote to make the Creo Modelchecker better!👍 Thx😉
1. Describe the ProblemWhen a hole file has been updated by the admin. The user should be notified when the edit a hole that some thing has changed. Currently, the parameters are updated without notifying the user of the change. Case 1: We want to update the Fasterner_ID to a decimal format.1) User gets a change order to change hole depth of an existing hole. Hole was 1/4-20 using the old hole file.2) User opens part, edits the definition of the hole to modify the hole depth.3) User OK's the edit4) The hole fastener ID has been updated to .073-64 hole without alerting the user. (First hole in the detail file)5) Hole information is incorrectly shown on design documents Case 2: Administrator remove a legacy hole detail file from the load Point.1) User gets a change order to change hole depth of an existing hole. Hole was 1/4-20 using the old hole file.2) User opens part, edits the definition of the hole to modify the hole depth.3) User OK's t
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 82. What is the problem?Sheetmetal part with overlapping geometry is a big problem because it can not be manufactured in one piece of sheetmetal: ModelCHECK should just run internally the "Flat Pattern Preview"3. Are you using a workaround? If yes, please describe it.Flat Pattern preview of all the parts4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.If modelcheck could give a warning about overlapping, this problem will disappear.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)I think this problem is usual in all the companies, so this will benefit everybody. (All the organizations with Creo Parametric and ModelCHECK)
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.A product design company that uses the different design stages s.a. concept/prototype/production/...2. What version of Creo Parametric are you currently running?7/83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When moving to production state , often the automatic update state get's forgotten. If parts are then not released or locked, they will be updated. In order to help detect these kind of parts, it would be helpful to let ModelCheck indicate the parts that still have copy geometry features on that state.Even better would be a tool that enables an engineer to set the status of multiple parts/features at once.4. What is the use case for your organization?Do a check on an entire assembly to see which parts would still automatically update.5. What business value would your suggestion represe
1. Describe the Problem It would be helpful if there was a way to use asterisks in ModelCHECK's configuration files, e.g. in the condition.mcc file, to call a special check profile if the model contains one or more parameters that begin with "USR_", for example. If "MODE_UPDATE" is set to "Yes" in config_init.mc and the "EXTRA_PARAMS" option in the *.mch file is also set to "Yes", all parameters that are not present in the template defined under "PRT_TEMPLATE" in the *.mcs file will be deleted. This means that all parameters added by the user will be deleted. This is dangerous because not all parameters are used by a relation and these are therefore deleted by ModelCHECK. By using an asterisk in the condition.mcc file, it could be detected whether there are multiple user-defined parameters that begin with "USR_", for example. This condition in the condition.mcc file could look like this: IF (USR_*) config=(check/mat.mch)(check/usr.mch)(start/mat_mm.mcs)(start/usr_mm.mcs)(constant/mm.mc
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 10.0.12. What is the problem?after running MC you get the detailed report. in the report it would be very beneficial to have the abilityto Redefine / Delete / Suppress or any other relevant action per result, from the report itself rather than going to the model tree search for relevant and apply the action3. Are you using a workaround? If yes, please describe it.to search for the feature in the model tree, select it and apply the command.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)~200 users. lost of productivity having the added action buttons or at least changing the behavior so selecting the warning/error willselect the feature i
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 8.0.5.02. What is the problem?We were able to extract the X , Y and Z from the OVERALL_SIZE parameter values using relations. However, the extracted parameters are String Type, but we need them as Real Number data Type. The requirement is to extract the X , Y and Z Parameters as Real Number Type.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The X,Y, Z parameter values will be transferred to Windchill CAD document Attribute and further to ERP. For Windchill and Oracle only Real Number data is acceptable for these parameters.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It is blocking the production deployment. (500+ users)
With DIR_REPORT defined in the Modelcheck settings, if the directory specified does not exist, an error is logged in mc_err.log stating that it did not have write permission to the location, and it instead dumps all the html and png files into the working directory. Idea: If the specified location does not exist, create it automatically I had to recreate this after PTC archived it since I did not provide the following critical information: 1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Space. MCAD Administrator. Engineers.2. What version of Creo Parametric are you currently running?In production, Creo 5.040. In development, Creo 7.070.3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.It's written up on top where it's easier to see.4. What is the use case for your organization?Well... when someone uses C
1. Describe the Problem given a symbol definition which has grouping and variable text. There is no functionality which allows to specify an intended symbol group name to be used in a 2D or 3D note via "&sym(SYMBOL_NAME) note text" syntax PRIOR the note placement. The specification of the grouping and variable text is achieved, after the note location is picked and the note is placed, via old Pro/Engineer 21 side menus. The idea: allow the specification of a SYMBOL_NAME to be similar to filesystem directory path. given a symbol with the name "MY_SYMBOL", with two groups "GROUP1" and "GROUP2" and variable texts VARTEXT1 and VARTEXT2 please consider this syntax: &sym(/MY_SYMBOL/GROUP1?VARTEXT1:TEXT 1?VARTEXT2:text 2) some note text which would make a note showing geometry defined by MY_SYMBOL/GROUP1, with VARTEXT1 to be set to "TEXT 1" and VARTEXT2 to be set to "text 2" and the actual note text being "some note text" 2. Are you usi
1. Describe the Problem With ModelCHECK it is possible to assign a material if no material is assigned to the part.If more than one material is available in the part, ModelCHECK will skip the test because everything is OK.For testing reasons (FEM simulation), it is sometimes normal for more than one material to be available in the part. However, if you want to release the part for production, only one material should be set “as master” and the others should be deleted. It should be possible for ModelCHECK to be able to delete all unassigned materials with a setting. 2. Are you using a workaround?There is no workaround3. What is the use case for your organization?increase data quality and avoid errors4. What impact does this problem currently have on your organization?The impact is not that big
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.- Emerson Innovation center , Working as Cad Admin and Windchill business and System Administrator2. What version of Creo Parametric are you currently running?- Creo Parametric 4.0 to creo parametric 8.0, 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.- Model check view boundary does not calculate the drawing GD&T , surface finish and partial view axis as entity outside the drawing boundry4. What is the use case for your organization?- We have customized Promotion request according to Model check error , in this case actually there is error but model check is not reporting the issue.5. What business value would your suggestion represent for your organization?-
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We design and manufacture high-end electronics. I am the CAD Manager / PTC SME. Stakeholders for this idea include our Creo user community. 2. What version of Creo Parametric are you currently running?8.0.5.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Creo already gives an indication to the user that their GD&T is not valid. This is done either by a red underline or by using GD&T Advisor. However, modelcheck should flag an error if there is a blatant non-compliance. For instance, modelcheck should flag this: It would also be great for ModelCheck to have a separate check for any GD&T not created using the Advisor. 4. What is the use case for your organization?Like all organization's, employees come and go. Which means that we hire engineers with different skill leve
1. Describe the ProblemModelCHECK currently supports a "Layer Move" function that, for legacy parts, can create new layers, move items from old layers to the new ones, and delete the original layers. However, this process can disrupt existing layer states, causing unintended display issues. A solution is needed that allows ModelCHECK to rename existing layers—rather than recreating and deleting them—to preserve current layer states.2. Are you using a workaround?We are currently using mapkeys that require users to manually select the layer to be renamed. This approach is time-consuming, error-prone, and inconsistent across users.3. What is the use case for your organization?Our organization relies on layer states for both Model-Based Definition (MBD) and drawing documentation. To maintain consistency and avoid display issues, we need the ability to rename legacy layers without affecting existing layer states. This ensures that MBD views and drawing representations remain intact while up
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 10, Windchill 112. What is the problem?Unable to automatically create a parameter with units using modelcheck in creo parametric. Refer to article CS2114873. Are you using a workaround? If yes, please describe it.Manually open each file and run a mapkey to assign units to relevant parameters before being able to check the files in to Windchill4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Migrating legacy data into Windchill, we use modelcheck to create and designate the parameters in creo. Due to the fact that parameters like mass and surface area are defined in Windchill as "Real number with units", we are unable to check in files where modelcheck has added the correct parameters because modelcheck is unable to create a parameter with units. 5. What impact does
Instead of some individuals using 'weird' scales in views or sheets within a drawing or accidental typos, like 9:33, it would be nice to add a check to define standard list for view scale in drawing.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.