Recently active
Below are a list of some of the items on our company checklist that are not covered by modelcheck. We would like to see some of these implemented. I know some have their own product idea, but I'm throwing everything in here: No Weak Dimensions All Orphaned Dependencies Broken Features set to Read Only Any un-embedded datums or sketches should be named No 0 dimensions for scenarios where they could be constrained to coincident (in sketches, holes, datum planes, etc) Only Locked Dimensions, where applicable All dimensions should be named when used for relations or family tables All features should be named for family tables Sheetmetal flatpattern won't fail No nested family tables Patterns should be set to Identical, where possible, instead of General Remove unnecessary relation comments Any sheetmetal features not using the default sheetmetal parameters for bend radius, etc... First Assembly component that is externally referenced First Assembly component that is not using defau
Currently ModelCHECK is not available in Performance Advisor's dashboard "Functional Area Usage > Functionality Usage". Also see PTC's document CS252752. As we use ModelCHECK quite extensive, having it listed in the list of "Functionality Usage" would be helpful!
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I'm a professional product designer and use CAD every day. 2. What version of Creo Parametric are you currently running?I'm using Creo 7.3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.I want to be able to fully utilize mice that have extra buttons, such as gaming mice with more than the usual 3 buttons. This will reduce the amount of keyboard use for navigation to improve productivity. To my knowledge there is currently no way of changing the navigation buttons from the default middle mouse button, shift and control keys for rotating, panning, and zooming. Ideally each of these could be a single mouse button (or any controller input the user wants them to be) if it could be remapped in Creo. 4. What is the use case for your organization?Faster navigation with
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Aerospace and Defense.Engineering Systems/Tools AnalystVery large Creo Parametric user base.2. What version of Creo Parametric are you currently running?7.0.8.0 in Production9.0.0.0 in Testing3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Having to individually select curves for the Project function within Sketch mode is extremely tedious. The system should be able to do the heavy lifting in this case by allowing Window Selection capabilities.4. What is the use case for your organization?Creating extrude features from very complex imported 2D geometry. 5. What business value would your suggestion represent for your organization?Much easier workflow for creating intelligent 3D solids from legacy 2D data.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Energy. Product Designer. Large companies with large orders. 2. What version of Creo Parametric are you currently running?8.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When opening the measure tool in a large assembly the performance drops significantly, and panning/rotating the model is painfully slow. As identified in CS307695. The best PTC has to offer on this bug is telling its customers to deal with it, as this has been marked as 'no plans to fix'. A workaround is not a fix. Changing the selection filter works, but takes time to open and find the desired filter. If you refuse to address the poor performance, at least let us set a default filter to use when opening the measure tool. If users need to change it from their set default, it is no slower than the way we all have to wor
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We design and manufacture high-end electronics. I am the CAD Manager / PTC SME. Stakeholders for this idea include our Creo user community. 2. What version of Creo Parametric are you currently running?8.0.5.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Reference: Case: 16087371 SPR: 13261009 In our PCB Board start-part, we have ecad areas for the annular rings around PCB mounting holes. These ecad keep outs are on the top and bottom of the PCB. We create an ecad area on one side, referencing the hole. Then we create the ecad area on the second side and reference the first ecad area. We group the 2 areas and reference pattern it to the PCB holes. This works great in the regular part mode. However, in the ECAD module (which is using the sheetmetal code), i
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Any industry using Sketches in Creo Parametric2. What version of Creo Parametric are you currently running?Creo Parametric 8.0 and 9.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When using "Sketch Region" to extrude a portion of a sketch, it would be more productive when it is possible to select the boundary of a sketch instead of selecting different regions. For example (see screenshots) when extruding the sketch in the picture as a full solid body, in the current Creo version(s) the designer needs to select the three seperate regions or areas. If it would be possible to select the boundary of the sketch, then the selection would be made in one click (see second screenshot).4. What is the use case for your organization?Productivity, better workflow5. What business value would your suggest
Currently, it seems to be impossible to use ModelCheck to find weak Sketcher dimensions.Please add this functionality.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Military industry2. What version of Creo Parametric are you currently running?6.0.6.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Sketcher works like this when having 2 circles and trying to create dimension:C+C: circle 1 center+circle 2 center = dimension from center to center = logicT+T: circle 1 tangent+circle 2 tangent = tangent dimension between circles = logicC+T: circle 1 center+circle 2 tangent = instead of center to tangent Creo creates dim from center to center = nonsense. Only one supported solution is to use centerline but it is silly workaround. Dim C+T not working even in Creo 9. 4. What is the use case for your organization?Confused Creo users5. What business value would your suggestion represent for your organization?Allowing to use Creo as intuitive SW
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I am Kamlesh and I am a Mechanical Engineer working as a technical support engineer in GMMSPL for PTC Creo2. What version of Creo Parametric are you currently running?Creo 8.0.5.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Dear Creo product manager and the team, today one of our customer had reported the issue in Creo sheetmetal as below Sub:-Not able to create the miter cut for the below scenario As you can see below image, it took almost 4 feature to create this behaviour, but if we have the miter cut kind of functionality for the individual edge in one go then it will save the huge time of the designer I know the workaround is to use the flange command but some time it is not possible to use it.4. What is the use case for your organization?Increase the product
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Space industry, senior CAD and systems engineer, Our company and customers2. What version of Creo Parametric are you currently running?6.0.6.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.In when performing an analysis on a component using Creo Simulate, through Creo Parametric, one can view the Results window. However, one is forced to close this window to go back into both the Simulate environment and to the CAD environment to make alterations. It would in many cases be good to have the results window open when going back to make changes, such that one can look back at the results window to see where these changes should be made.As a second step, one could envision a "Refresh" button in the results window that reruns the associated analysis and updates the results accordingly. A dialogue b
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Industry - High End ElectronicsRole - CAD AdminStakeholders - Engineering, downstream teams, vendors, etc.2. What version of Creo Parametric are you currently running?8.0.4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When selecting a layer it currently only highlights the features in the first assembled instance in the assembly. As seen in the screenshot below when selecting the planes layer only the top version of the same parts features are highlighted. When the layer is hidden all of the planes are still hidden. 4. What is the use case for your organization?When trying to inspect parts selecting the layer to make sure everything is included per company practices and if not all the features are highlighted it can be confusing to see only half of the features selected wh
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.?2. What version of Creo Parametric are you currently running?73. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Activate and De-Activate part in assembly from pull down menu4. What is the use case for your organization??5. What business value would your suggestion represent for your organization??
In the Creo Model tree, we would like to have the function of "COPY NAME" to copy the CAD part name as text after selecting the model in model tree with RMB click.
In order to have the same Figure View among a number of Figures Would be useful to have this function "Copy the Figure View from another Figure" So not only the Orientation but also magnification and position would be the same To get consistent series as shown below
While using Creo on a secondary monitor, and you open an file in a new window the window opens on the primary monitor not the secondary monitor where your session is running.Creo 7 and beyond.Give the user (or at least a config setting) the ability to open a new window (file) on the same monitor as the current session is running.
Please add a configuration option that would force the user to resolve a circular reference as soon as it is created. The option could be turned off for users who are fine with creating circular references temporarily.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I'm the CAD business manager in a Manufacturer of hydraulic components for hydrostatic transmissions.2. What version of Creo Parametric are you currently running?8.0.4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.In the detail drawings, in the notes, when we activate the Bold button, the system add to the note's thickness a value of 1/15 of height, it will be appreciate to have a config.pro or a details option to tick the Default option of the Thickness to have a standardize value of thickness with Bold button. 1/ Note's selection2/ Bold button activated => Thickness = 5*1/15 + 0.34. What is the use case for your organization?Drawing details activity.5. What business value would your suggestion represent for your organization?Time saving in symbol addition and standardization
Presently, If the wire data tables in Creo Schematics are in English or Metric units and the Creo Parametric drawing is in the other unit family, HMX says "Mixed Spool Units have been detected and logged. Exiting" then kicks you out of the program.If someone has models in both types of units, they would need to keep two data tables on hand ans switch between them in order to make schematics.It makes sense if HMX can convert the needed values to match the spool information to the model.
In Creo Schematics 3, when transferring information from CID to WID, circuits that only had 2 termination points would automatically route the wire in the WID. I understand that this feature has been removed in Schematics 4. I would like to have it back with a switchable option to allow or disallow the feature to work.
The present multiline text function (https://support.ptc.com/help/creo/creo_schem/usascii/index.html#page/Schematics_hc/To_Add_Text_With_Multiple_Lines.html) allows the user to adjust the text box size/shape while it is first being placed (but no instructions about that in the help notes) but then it is locked in place. If you start a new line in the input box to separate items that should be on different lines, they are concatenated together without a line break.
I have been doing a study on this Creo 4 module, and there are some enhancements that I see as being needed. Being able to unbend is great for flex designs. However, when rigid/flex designs are considered the current implementation falls short of what I want to represent. Essentially it seems that PTC made a modified sheet metal design for representing the board which is a special .PRT . In order for unbending to work all features must be the same thickness. This is not the case in real world designs. Flex segments are thinner. The flex can come off of either side of the rigid board, out of a middle layer, or even from a combination, meaning that it is possible to have separate flex segments along the same edge coming off front/back/inner layers. Additionally, where connectors are placed there can be stiffeners that are a different thickness than the base board section. The minimum bend radius requirement of being driven from the board thickness is also not representative of
As of Creo 4 M040, these checks are very rigid and don't allow admins much flexibility to meet their business needs. Please add functionality to allow allow admins more flexibility to meet their company needs and make sure any changes/exceptions get included in the Creo Help Documentation. FORMAT_NAME - allow NO FORMAT as an option for admins to allow as many DXF 1:1 drawings don't have formats. MATERIAL_INFO SHTMTL_BENDTAB - the Creo 'Not Assigned' works well enough for many of our use cases... please allow NOT ASSIGNED to be an acceptable bend table value for admins to allow if desired. STD_DTL_SETUP Please add a way to toggle using Creo defaults for not specified DTL settings or take the approach if the DTL didn't specify a setting then the admin wants users to be able to adjust that setting. Adding the option to pick DTL files based on the current drawing format name (not just the format size) would increase the flexibility of this check since we have differe
Creo Schematics libraries, Submission and Catalog, are currently managed on a shared network drive and are not able to be managed in Windchill. This idea request is to provide the ability to manage Creo schematics libraries in Windchill. We have design staff around the globe and would like to use the Windchill replication capabilities to improve both performance and global user access to the Schematics libraries.
Add Annotation Display to Datum display filters drop down in quick access tool bar It would be nice to turn the off the annotations with the rest of the non model geometry features
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.