Recently active
Demande d'ajouter un paramètre interne afin de pouvoir récupérer en mise le nom de la table de tolérance associée à la pièce
Creer un outil permettant d'ajouter automatiquement le(les) symboles d'une dimension dans le texte d'une autre dimension. Dans les propriétés de texte (cote, note, tolerance geom) avoir la possibilité de sélectionner un paramètre ou dimension et d'ajouter automatiquement son symbole (&pxx, &dyy) dans le texte. Pour les paramètres : selection la feature dans l'arbre de modèle obtenir la liste des paramètres internes sélectionner le paramètre pour ajouter son symbole à la note/texte de cote Pour les dimensions Selection directement la cote sur la mise en plan pour ajouter son symbole à la note/texte de cote Exemple : Texte dim A : &p99x Ch. &d10x&d11 -> x2 ch. 0.5x45° Le p99 provient de la selection du nombre d'intance d'une repetition
Afficher l'arbre de modèle et l'arbre de couche en même temps dans le navigateur par des fenêtres "dockable"
Actuellement les tables de trous ne supportent pas les parametres thread_depth et drill_depth. Les profondeur sont calculé directement dans CREO lors de la creation des trous standards. Les profondeurs proposé par defauf ne correspondent pas au standard (NFE 25-030). Ajouter les parametres thread_depth et drill_depth à la table de trous afin de pour piloter ces 2 profondeurs comme les autres parametres ( FASTENER_ID BASIC_DIAM THREAD TAP_DR ....)
Ameliorer l'interface utilisateur pour les opérations d'usinage : Supprimer le tableau des paramétrés de l'opération et le replacer par des onglets, des zones de saissie, des menu déroulants pour les options, des schemas ....
Hallo, Every real vibrating system has anti-vibration mounts to isolate the system form ground. Today there isn't any possibility to simulate this into Creo simulate. This is serius lack because the vibrating system is strongly influenced from the elastic behavior of its mounts. I suggest to implemet this by adding a two way spring table: today you can input the spring stiffness, and the spring use the same value of the stiffness both in extension and compression condition. It would be sufficient if it were possible to set two values of stiffness, one for compression, the other for extension condition in order to simulate pre-loaded elastic supports.
I propose a new config option: 'Advanced_reference_configuration' that let this Paste Special option always checked with 'yes' or unchecked with 'no': Thank you
When aksed to select a centerline when using the "mirror - mirror selected entities" function in the sketcher, any straight line, entity or reference selected should "become" a centerline. (A centerline should be created, using the selected entity or reference) Save clicks! preserve users! 🙂
Currently, the secondary dimension is truncated to be able to comply with not exceeding the value permitted by the primary dimension. The problem is that when the dimensions are displayed in reverse ("secondary [primary]"), the values are inherently incorrect. To further elaborate, we model in SI Units as we work internationally. Bur our parts are fabricated in the US, so we draft with the primary dimensions displayed as Imperial. For this example, drawing dimensions are shown as .XX +/-.xx [.Y +/-.y] where X is in inches and Y is in millimeters. A modeled dimension of 100 +/- 10 mm currently displays as: 3.9 +/-.3 [100 +/-10] This is terribly incorrect, as the dimension above would require the displayed secondary dimension tolerance to be truncated to a max of 9 mm to fit within the bounds: * max bound of 109.42 mm = 3.954 + .354 in (this assumes 5 is alway rounded down) * min bound of at 89.05 mm =
I create large machine level models with an enormous number of connections. The "Integrated Mode Error Checking" step takes about as long as the remainder of the run in some cases. I would like to either make this algorithm much more efficient or offer a lighter version of this check that performs only what is absolutely necessary for the solution to kick off. I'm 100% OK with the run failing later when it gets into the solution without providing much diagnostic information as I'm used to that having worked with Mechanica for many years.
We want to extend form and position tolerance as check dimension in Creo Elements/Direct 19.0 M050 Annotation (see screenshots).
When attaching Datum Feature Symbols, in almost all cases the user wants the datum feature symbol to be normal to surface that it is being attached. I am suggesting that for these cases the annotation plane be "Normal to surface". Obviously this case won't work for all annotations so this could be an option that shows up for a subset of annotation for which it makes sense (datum feature symbols included).
currently no notification function available for Open File Cancel Button
everyone who has used the advanced design modules yet (Relations) and created a long list of relations will know how annoying (even frustration) it can be if you need to search for that 1 relation that you want to modify. if your relation set i well build, then you mostly do not have to change more then a handfull of relations, but you need to search for these reltions every time again when you want to change them.at today there is no possibility to mark these relations as being more important. There is no possibility to put them on the top of the list.there is no possibility to filter out some sorts of realtions, so for example coincident relations are not shown. this is defenitly not an intuitive UI.the idea that I suggest goes even further. it would be great if PTC develops a sort of browser where the user could manually add his "favorite" relations.
It's not possible to modify the diameter of a cylinder but only it's radius and the dimension created by flexible modeling is a radius.We would like to have a diameter dimension it's better for use in order to use it in a drawing. We never use radius diamention on holes / full cylinders.
User must use environment variable and dos command to borrow a license for max 14 days or for return early a license or for return a license that it is not check out correctly. All is difficult!!! I think that a user interface could be usefull and also the possibility to borrow a license for longer period.
Many companies create drawings with Creo Parametric that have the same name as the 3d model, that is shown on the drawing. Therefore it would be great to have a standard function inside Creo Parametric that creates a new drawing with the same name as the active 3d model. If a user is creating many drawings it will save a significant amount of time.
The part simplified rep should act the same way as an assembly simplified rep in a drawing.If I need to change a view to a different simplified rep, I should not have to create a new view.
Model check offers great automation functionality, but its UI makes it rather intimidating, hard to learn, and hard to change/update.Can we see some improvements to it, especially to the UI? Such as making it easier to learn and use its powerful functionality?
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We (Novus Nexus) is technical partner to PTC. We developed CAE automation product-CAENexus as an addin/Auxiliary application over Creo using Pro/toolkit API. Our product has been used by some of our common customers using Creo. This issue has been originally reported by John Deere. I am working as software developer and support engineer for CAENexus.2. What version of Creo Parametric are you currently running? Creo 7.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. CAENexus creates simulation model (imprinted model) as ProToolkit's ProMechModel. The ProMechModel created using Pro/Toolkit API do not create expected imprint model in some geometric situation. To know about these situation in more detail, please find the presentation in attached zip file. 4. What is the use c
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Chassis designer:use sheetmetal and solid in Creo Parametric & EZTol. 2. What version of Creo Parametric are you currently running?Creo 7.0.3 upgrade to Creo 7.0.83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.We find some dimension items in Stackup table becomes to sensitivity=0 after we add draft angle and round edge.As the picture“sensitivity0_1003-1.jpg” shown, we can see the sensitivity of Hole83 is ½, and Asm shift Hole83-Shaft81 can be auto-shown in Stackup table.But if we modify the hole and add draft angle and add round edge feature as picture”sensitivity0_1003-2.jpg” shown.Because the plastic hole isn’t parallel with standoff outer diameter surface after to add draft angle and round edge. We have to select the edge on the hinge of the draft angle in the dimension loop.But w
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We design and manufacture high-end electronics. I am the CAD Manager / PTC SME. Stakeholders for this idea include our Creo user community. 2. What version of Creo Parametric are you currently running?8.0.6.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Reference Ticket: 16548299 Background: We had an issue with an auxiliary application running in Creo. We checked our protk.dat in the text folder and couldn't find where this was called. We checked the Information Window, by using File>Help>System Information and didn't see anything. The data shown there did not show any other protk.dat file except for the one in the text folder. After a lot of back we found the protk.dat within C:\ProgramData\PTC\Creo8\Plugins. This was news to us. The Information Window / Sy
PTC should create simple config option, which controls if Model Tree Columns are hidden or shown.show_model_tree_columns_on_start yes/noSee the pictures below.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.CAD and PLM responsible for a steel construction company which provides solution for large bulk handling and liquid storage projects. 25 CAD seats on 2. What version of Creo Parametric are you currently running?Creo 5 (and Windchill 11.1) , moving to Creo 9 (and Windchill 12)3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.A curve pattern always seems to go 'counterclockwise' on the curves provided in a sketch. Drawing the sketch from top to bottom or the other way around doesn't influence the pattern direction. The result of the pattern always follows the curve in that counterclockwise direction. Strange enough, the preview for the pattern is what I would have expected :4. What is the use case for your organization?We use this pattern type a lot for components, assemblies that typically f
Starting in Creo 6 a new checkbox was introduced that allows the drawing to take the same name as the primary part or assembly when creating it. Currently if the box is checked it remembers the preference for the session but not after restarting Creo. This idea is to create a config option so that checkbox can remain always checked.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.