Recently active
Jeffery,You're refering to .stl not .stp, right?
Praveen,Before opening any files, I would recommend scrolling down the folder tree (as shown below) and selecting the folder where the target file resides. Then make that the Working Direction by RMB. Whenever I launch Creo 3.0, the Working Directory defaults to My Documents (set up that way), but I'm always changing it to different folders.
Andrew,When I open the attached drawing, this is what I'm seeing. Is this correct?
Dan,The below image is a gear that was created in ST6, and imported into Creo Parametric 3.0 (M010). After importing, notice that there are no features in the model tree, except for the import feature. However, once the model has been imported, it is a workable solid or surface. For example, if you imported a simple beam, you could cut or add features to the beam. If you have the Flexible Modeling Extension, you can modify some existing features such has holes, thickness, rounds, etc, and this will be added to the modeling history. It's important to have the Flexible Modeling Extension if you're going to be working with imports.Welcome to the forum.
Thanks. That did it.
You can extrude it to a surface that is part of the solid geometry, as shown below:
After importing a model, I cannot change the color of the entire part at once, only by clicking on each surface. Is there a way to correct this?
I already tried those methods, and none of them worked for me. I have attached the part.
Works really nice with freestyle surfaces (shown below):
Mahesh,Thanks for sharing this information, as I was able to replicate it too (shown below). I wasn't aware of this functionality.
What is the weight of the object before removing holes?What is the target weight?
Good. I've been out of the office for the past couple of weeks, so I'm sorry that I didn't get back on this one. But you figured it out on your own.
It appears that inifinte friction will hold the block on the disc. Finite friction is a slippage indicator, and the components bond together.
This model was just an experiement, and there are a lot of warnings in the run summary. So I don't have a lot of confidence in the solution. I built it just to show myself it wouldn't work, because of the unconstrained block. Assembly attached.
Cameron,I never tried a problem like this before, but I made an assembly, disc and block, and ran the model with angular velocity. The bore in the disc was held with a pin constraint, and there is an infinite friction interface between the disc and the block. I didn't think this model would run, because the block is not constrainted. See below images.Figure 1: ModelFigure 2: Displacement Plot
Moha, You may want to try sketching the six sections with equal number of entities, sweep it as a solid, notch out the relief, then shell it. This way, you won't have to worry about using the round feature. Just a thought. Images posted below.Welcome to the forum.
M010 has the capability to import SolidEdge parts and assemblies. I imported the attached SolidEdge gear. FYI.
The draft worked for me with Creo 3.0 F000, up to 89.9-degrees, and I'm already up to M010.
Moody,Do you have to model the entire jet, including all systems and subsystems, or just a 3D image of the jet? For example, do you want to model a 3D surface of the entire jet?Welcome to the forum.
Frank,I've attached a couple of images on how to make a knife tip with boundary blends, and I attached the model too.
What does the train look like if you select Render Window?
Was the larger image of the train in the Render Window? Was the below circled function selected?
Roy,Are you refering to the below images? The second figure is using the render window on the same part and color.
Nice model.
What you're saying is that the mas properties don't update when you switch between views, as shown below:
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.