Recently active
Erik,What do you mean by "I cannot use Creo 3.0 for normal business"? Are you referring to just the finite friction capability?
After deleting an intelligent fastener, it leaves the holes in the plates. These holes were created by the intelligent fastener module while making the fastener. Is there an option to remove the holes when removing the fastener?
Oliver,How many more fasteners to you get with the full version of IFX vs the lite version that comes standard with Creo Parametric 3.0? Or is this a question for PTC sales?
This is already a sheet metal part. Are you wanting to flatten it?
You can start with something similar as shown in the below images.
You problem sounds like something for Mechanisms.
Correct response....but disappointing .
What happened to the capability to respond to a reply as Helpful?
Davor,The reason it didn't work for me the first time is that I deleted the fastener in the model tree, but if I delete it from the Intelligent Fastener Menu before deleting it from the model tree, then it also deletes the holes. If the fastener is deleted from the model tree, then the holes can be deleted by activating each plate and deleting the feature for the specified hole. So you gave me the right answer and Oliver confirmed it. But it must be deleted from the Intelligent Fastener Menu first. Thanks.
You can make the mesh with curve by equation, sweep on the curve, then pattern. I make a quick example as shown below.
Yes. I tried that, and it didn't work.
Can you post an image of the desired mesh?
PTC's definition of scaling:
I know this video isn't identical to your problem, but there appears to be some useful information in the video.
PTC has a free video on how to set up contact with finite friction in the below link.http://learningexchange.ptc.com/tutorial/3547/defining-contact-faces-with-finite-friction
Creo Simulate is based on the p-version of the finite element method, in which the fidelity of the finite element model is increased by raising the polynomial orders of the finite element basis functions. This approach is in contrast to traditional h-version finite element programs, in which the fidelity of the model is increased by adding additional elements. Also, Creo Simulate has convergence algorithms that automatically increase the polynomial orders so that accurate solutions are efficiently found without requiring manual intervention from the user.Did the Solidworks example use p or h elements?You can make the element size for volumes, components, regions, etc., not just for surfaces.
If you want just a fastener anslysis, this can still be done in Creo 2 with the advanced fastener tool (axial, shear, and bending). If you want a multi-body contact, bolt shank in contact with the bores and head/nut contact, Creo also has this capability.
Mats,Did you compare these results with a Creo 3 simulation?
If the neutral file was not exported properly, it could have gaps or missing surfaces. I really don't have a need to export neutral files, but the ones that I have, there were no problems with the geometry after importing.
If you're refering to Pro|Engineer models, they are forward compatible, not backward compatible.
Will you be running the analysis in Creo 3.0? If not, which software?
Doug,There is a way to change the default color for surfaces, and it has to be changed with the default.dmt file, not the config.pro file. I've attached some instructions for Creo, and I just tested in Creo 3, so the steps are a little different. But there is enough information in the attached instructions to get the default color changed. So now, every time I create a surface, it's always transparent.
Yes. If you sketch a datum point, it will have all three.
I've never seen this problem before, so I will check it out when I get back to my office later this week. I know that doesn't help, but until I test it myself, I really don't know. There's View Max and View Model Max. If View Model Max is selected and you zoom in to far...you might get such a message.
I don't know about flexible modeling, but you can bend and unbend this in Creo with a Spinal Bend.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.