Recently active
Thanks Doug. I had made an extruded cut with thin features in Parametric, and I would always get that small line in the middle of the radius in the wrong direction. But making the part starting in Sheetmetal, I was able to replicate it the way you did.
How do you bend this?
I was able to replicate the bend, but I had to build three planar walls to do it (model attached). I was wondering if someone knows how to do it with just one bend with two walls or one bend and one wall. Thanks in advance.
I know that when you update a model, it updates the drawing. I haven't made drawings in PTC for a long time, however, I know this is suppose to work. How can I update?
.
Who really had unite technology first? PTC or Autodesk? Autodesk has a nice video on their version of "any CAD data" exchange. Link attached.http://www.autodesk.com/products/inventor/overview
Manikandan,I started the model with datum planes, axis, and curves. I sketched in the circles on top of the arcs to help orient the model for the viewers. You can try this approach and boundary blend between curves, and then just mirror the section after merging.
I'm not the one requesting class A surfacing (we don't need it in the airframe repair/mod business), and I'm well aware of CATIA and NX capabilities.
You're welcome. I didn't test it with Creo 1, but I know this happens if created in WF5 and prior. I'm currently using Creo 3.
Are you wanting Class A surfacing to use in Creo? If so, Creo does not have Class A surfacing or 3G continuity. Creo only goes up to 2G.
Mark,There are three figures shown below. Figure 1 is a curve created in WF5 using the Style Tool, and there is no Degree option. Figure 2 shows the same curve opened in Creo 3, but the curve has not yet been selected with the LMB and you can see the Degree option. Figure 3 shows the curve after selecting it with the LMB, and the Degree option disappears. If you don't see the Degree option, then the files were created prior to the Degree option functionality.Figure 1Figure 2Figure 3
Mark,Are you stating that there is no degree functionality when you attempt to edit curves created by other personnel? Are you using the Style: Curve Edit tab as shown below? Welcome to the forum.
Roland,Thanks for the presentation, and Slide 91 is a snapshot of Creo contact capabilities. I've always received very good results with frictionless contact, just as you stated, but worrisome with infinite and finite, and that's why I don't use these.
Dash numbers 1 thru 5 have max sheet thickness, meaning they could be thinner, so I will want to use the punch.
Antonius,There are two types of forms in Creo Sheetmetal in which you can build libraries, Punch Form and Die Form, according to the Help Center. Which one you use depends upon whether your reference geometry is in the form of the punch (the "positive" shape) or the die (the "negative" shape). I want to build 5 forms, so I think I will use the Punch Form and build the 5 forming tools listed in the below chart.
Nice work. Thanks.
Antonius,Notice the top image in the original post how the radius necks down on the end of the bead. I'm not stating I can't make this, but it's different than the images posted in Ken's link with the roller bead. This is a standard bead from an aerospace company where the radius is not uniform continuously.
Yes...I looked at it. Thanks.
Kiran,See if the attached post will help you:https://www.ptcusercommunity.com/docs/DOC-6061#comment-13814
How can I open xmcd?
Thanks Fred. What part of the Mathcad sheet includes the weighting factors?
Okay....thanks.
.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.