Recently active
Where is the weld in relation to the contact? Are you allowed to share the model? Can you upload some images?
Images with caption please.
Refer to below image:Import the solid geometry from SolidWorksSelect the filter in the lower right to QuiltsPress the ALT key and select desired quilts with LMBUse Copy and Paste functions in upper leftWelcome to the forum.
Go to Annotate > Note > Unattached Note and make a note for each view.
Makes sense.
What all the steps? What are your trying to achieve for results?
I think the stress graph goes with the fringe plot. You're seeing the max von Mises in both. Try plotting component YY.
Also, if you have a particular shape of spoon, maybe you can post an image of it.
If you have access to YouTube, just put in the search window "creo spoon", and there are at least five videos on how to make a spoon in Creo. Welcome to the forum. Hope this helps.
John, Here is a post that has some responses about the type of graphics that are being used with 4K monitors. There are several in there, so just scroll down until you find them. Dell Precision M3800 with (3840x2160) 4K2K - PTC Community
Denis,I think you find this thread interesting, since it's related. It shows how to calculate Kt using Creo's report. Also, there's a product idea at the bottom you might want to look at too.https://www.ptcusercommunity.com/thread/128420
Good to know. Thanks.
When using the Style tool, there is an option for trimmed rectangles to 3 and 4 boundaries. Chain 2 is on the working plane (Top Plane), and is there a way to control the surface to make it normal as is approaches the Top Plane? This is desired, because if the surfaced is mirrored about the Top Plane, the mating surfaces are not tangent to each other.
Nate,When you use trimmed rectangle for 3 and 4 boundaries, those options are not there. I know what you're talking about, those little yellow arrows to control the surface. I didn't see them in my example.
Denis,The file is attached. I created the two points before running the analysis. After making the fringe plot for YY, I selected the linearized stress report icon and plotted the curves.
Marco,Are you referring to the units in the upper left-hand corner, as shown below?
I got the idea of using a video with a timer from your original post.
Attached is the IDD manual from PTC.
Tom,How about that second round drawing?
There's a three part series on YouTube called Creo Flexible Compression Spring, and each video is about 30 minutes. The author eventually sets this spring to motion under mechanisms, but if this isn't exactly what you're looking for, it's still worth watching for educational purposes. These are very detailed videos using relations for the spring. I was very impressed with this series, and every Creo enthusiast should watch them.
To be fair, I think everyone would have to use something like Camtasia with a timer to prove their work.
Good point. I recently attended our local Pro|E users conference, and those who signed up for the challenge, as I did, had to have knowledge on the User Defined Feature (UDF). If you didn't know how to set up a UDF, you just couldn't work the problem.
Stephen,Thanks for the response. Everyone gave a correct answer of some kind in this discussion, but this web site only allows me to check one correct. There were a lot of great responses, and I learned that Creo sheetmetal cannot make this with it's own joggle tool, and that it's a stamped part in the real world. And there's no such thing as a flat pattern with this type of part.
Can I make a joggle under the Flange tool?
What's the prize?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.