Recently active
When you make a drawing in Creo Parametric, you select New > Drawing (not Detailing) as shown below. And there can be various types of drawings, such as Production Drawings, Assembly Drawings, Detailed Drawings, etc., but the bottom line, it's called a drawing. So the Product Idea was suggested for this area of Creo Parametric.
I keep receiving the following warning every time I start Creo. When I follow the instructions to re-install, startup keeps showing Agent already installed. Is there a fix for this? Thanks in advance.
Product title changed.
Are you interested in deflection of the glass and not stress?
Product image updated to reflect sub-communities that have been added since 2/19/2015.
Hi Denis,Are you asking is it possible to calculate a plate of glass that is "supported" on the four corners of the plate of glass without using the glass frame under a 1g load?
Still not fixed. Just checked it in M100.
I installed Creo Parametric 3.0 M100 after deleting M090 and all previously installed Platform Agents and installed the latest Platform Agent. This fixed the problem.
Marco,I think you would have to change the units to (mmNs) in the units manager before running the analysis in order to get MPa in the stress results window.
Bill,I don't have all the cross-sectional views, but one way you can make this is with a sweeping surface. I sketched two curves on one plane, and sketched another curve on another plane a distance away from the first plane equal to the wide of the twisting flange. Of course these are approximations, because I used your drawing to roughly sketch the curves. Then I converted it to sheetmetal, as shown below.
Gary,I had a similar problem in Creo 3 M090, and tech support had to email me a new default.dmt that goes in the appearances folder as shown below. I'm up to M100, but I had that problem in Creo 2 M180 also. Every model that I opened would be black. I've attached a clean default.dmt, and maybe this will help.
Was the merge into one new software Creo Illustrate?
Thanks for the presentations. A lot of material to review.
A good presentation with well thought-out flow charts, but I didn't see anything related to surfacing.
Community,Is there a way to change the size of the text after creating a note with a leader in exploded views? I have not been able to find a config option or any other way to change it, and the Text Style dialog has the Height and Thickness grayed out, as shown in the below image. Thanks in advance.
Good question. Wouldn't that depend on the amount of features you need for an end product? I know that you have face/vertex/edge for each element and you can move the csys to each, depending on how you want to shape the geometry, and there is a continuation of functionalities per face/vertex/edge. I'm still learning Freestyle, because I've only had one 2 hour class on it. I try making a rough sketch of my product (pencil) to determine what I need in Freestyle. But that may not be the best approach. I'm interested in hearing a good solution to this.
So for orders 4 - 9, it's still 7546N?
After correcting the error in the Creo model, how long did it run before a solution was realized?
Another example.
Great presentation.
What about setting up a series of runs on a simple contact model and see? Each run would be p1-p1, p2-p2,.....p9-p9 for a total of nine individual runs. Would this provide the solution?
John,Any objection to making your model like the one below? Sockets that I have seen don't use a swept blend. Do you have a special requirement to make it with a blend?
Are you allowed to upload the file?
Could you be more specific? Is this a question? Are you asking for the procedures to perform a welding analysis in Creo Simulate?
Are you not satisfied with the default provision for changing the drawing scale?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.