Windchill
Recently active
As our vault size grows, and our backups take longer and longer, we have decided to give purge a try. So far it’s not going that well. The problem can be replicated by creating a purge collection rule, as followsSingle product (all the data is isolated in the product)All foldersAll object typesNo restriction on versions to keepWhen we run a purge job using this rule, some items are purged. Yes, we use baselines and promotions so I’m not expecting just the latest to remain, but I’m really surprised by how much stuff remains. In many cases no version of objects are purged at all. I find it strange for such a purge to results in <10% data removal. So strange that we ran another purge job using the same collection rule (i.e. on the same product data that had already been purged). Additional items were purged, which were not removed on the previous job. We can repeat this process many times, and on each subsequent job more items are purged, albeit a reducing number each time.Surely all t
I have creo assembly,In which A.prt file is present two times.Then do we need to create two separate Wtpart and associate them with .prt files.or else What i should do. Thanks in advance Vipul
I have a context that I want in work WTobjects to have full control by designers, but released WTobjects to be restricted. When I add permissions to give WTobjects with an "in work" state, users in the designer role can check out but not check-in. If I right check permissions on the files, designers have full control but upon check-in get the error below. Any ideas on what would cause this? "ATTENTION: Secured Action. You do not have the necessary authorization for this operation. Contact your administrator if you believe you have received this message in error."
There are two sub-tupe models from Creo Cabling for harness and flat harness. But values of attribute Document Subcategory are empty in Windchill after checked in. I want to use "Disallow Structure CAD Document Sub-types" in Preference Management via these values but I can't because they are empty. Why values of Document Subcategory are empty in windchill for these models?
Dear sir I have one doubt regarding wtpart structure and CAD assembly from creo. I have one assembly in creo. Which have an repeatative part eg. screw a.prt ( with Qty:10). Ii am creating the wtpart structure manually in windchill. Then associating wtparts with checked in epm documents the cad files in windchill after is checked in. so to get the quantity as 10 for part a.prt in bom (wt part structure). Thanks in Advance Thanks & Regards Vipul
I'm looking for an API to get all the WTChangeReview objects from a WTPart.as shown. @HelesicPetr
Change Activity has Two TasksTask ATask B Task A - is Sent to a Role that is populated by a Group of 4 People.One of them accepts and completes the Task. Task B - Currently goes to all 4 People again. Would like Task B to go to the Person who completed Task A. My assumption is that we should be able to add Transition Code at the end of Task A that populates a Role for participant for Task B? Brian
Working to clear out old data and getting this error which trips up delete: Object "Baseline Member - wt.vc.baseline.BaselineMember:1170052405" references the object "Assembly - xxxxxx.asm, A.2" that was removed from the system.Object "Baseline Member - wt.vc.baseline.BaselineMember:1170052354" references the object "Assembly - xxxxxx.asm, -.4" that was removed from the system. I queried these rows and the EPMCheckPoint that it references does not exist. Goes back to 2017 and there are about 175 rows all with the same EPMCheckPoint IDA2A2. It looks to me this is a workspace baseline that no longer exists but for some reason, it did not clean up the member links. I did not see a WinDU to clean these up. I understand that BaselineMembers could be used for other things like Managed Baselines and Promotio
Hello,we are thinking about activating positioning assemblies. For that, we need to have representations for all items in our system.Anyhow, we have lots of items without a representation (couple of thousands), especially vendor components.Is there a simple way of creating (rule-based) publishing jobs for these items? Best regardsMartin
Good day,one of my tasks as ThingWorx-Admin is to move user from "available member" to "member" in an user group.Important: The username needs to have only lowercase letters to fit to the corresponding AD-group. As soon as a user logs-in with uppercase letters or misspelles the username, a new "available user" is generated. It's getting messy already, so I would like to delete all these accounts. Is that possible? Kind regardsMartin
Hi All,We just switched to WC 9.1 m040. Since then my modelcheck stopped working - I had to disable it. We had configured gatekeeper back in WC8.0 and it had been working fine till now. When we switched to 9.1 we started getting checkin failed with "ModelCHECK failed on model(s) in the context " and "Incorrect set of config files used on ModelCHECK in the context ".I have a call opened with PTC- their respond is to make sure the syntax is correct and no additional characters in the definition of ModelCHECK Configuration pref in WC. That has been checked...Anybody else seen this? What is the solution?Thank you in advance,Dmitry
Hello, I see this topic is 10 years old, but as I have exactly the same need, and found no solution. I would like to grant a role from us, design project leader, rights to control the task deadlines, so that notifications are sent on the target dates. Often he does now know a realistic target date, when assigning tasks. Unfortunately this is not possible without a customization. Article - CS61502 - Is it possible to give the ability to Edit Deadline for assignments to certain Roles in Windchill PDMLink (ptc.com) RE: post
I'm looking to create an event in Audit logs when I download a set of files using a custom action.Just like how an event gets created when you download an object. This is totally new to me, so please help me from the basics. If it's feasible please explain me how it should be done programmatically.
Hi, I have a problem about the langauage pack. I use Windchill 12.0.2.0 and language with Korean.When I download the part's dwg files, download popup's link has been crashed.But if i use the english, link is ok. How can I fix this problem?
In Windchill 11 - when doing eBOM/mBOM transformation - there was an option to view consumption status. You click a part from the visualization window and it disappears or turns translucent to represent consumption. In Windchill 12 it seems as though the "Render Consumptions" button is missing? And in the documentation there's a former link (guessing by the font color) MPMLink Visualization Panel that would in theory answer this, but the link is no longer active. Has this functionality moved somewhere else or is it no longer available?
Hi Comunity;I need to bring the fields in the red box below as a list, how can I do this?
Hi All,My requirement is to show a custom Attribute on Analyse Change request Task page of change Request.In this task, assignee can choose the correct values according to his choice from drop down values.Any Idea ?Regards,Vivek
I'm working on a custom action which opens up a jsp when clicked. When the jsp opens, I want to check the users license type and allow only if the user has got a certain license type, for example - PTC View and Print Only. Please share me the snippet if anybody has done this earlier.
Hi All, I want to do one modification in the ECR, Once the ECR is deleted or terminated the auto generated mail should generate and send to respective user who are all involves in the ECR.
Can anyone tell me what the PDMLink attribute "Assembly Mode" is used for and where? I'm trying to understand what the ramifications of the 3 different types are.
I have a workflow task where I added a document link which the assignee clicks to download. The link is the exact url as shown. How can I rename this link to something a little simpler? eg. "CAF Form" http://alexandria.windsormachine.com/Windchill/servlet/AttachmentsDownloadDirectionServlet?oid=OR:wt.doc.
Hi,I made a family table drawing for all my instances.But when i'm search a instance i can't found the family table drawing cause there is no link.How can i make it appear during the research of each instance? Thanks.
Hi all I have requirement to add a label/tag (like label feature in Gmail) to all Windchill objects( WTPart, WTDoc, CAD, Change), for better categorization. Need suggestion on the best solution to adapt. I don't want either of the object to get iterated while association is created. Also i want the reporting on the label collection objects.I can create WTDocument subtype for the label/tag. But not sure which configurable link is good as i don't want to iterate. Also irrespective or the iteration/revision association should be maintained. Need your suggestion.
Hi, My business team wants to use one CAD model to create Engineering as well as Manufacturing Drawing and associate them to the respective engg and mfg Parts.Is it possible to achieve this procedure? If I create multiple drawing to one MODEL, Windchill shows all drawing as "Calculated" and displays in all parts.
Hello,I want to create a WTDocument using windchill rest service there is an API under Document Management.Could you please help me for the providing proper input.The input JSON is below-{"Title": "","Number": "1234","Description": "Text","Name": "test","@odata.type": "#PTC.DocMgmt.EngDoc","SmallThumbnails@odata.bind": [""],"PrimaryContent@odata.bind": "","Thumbnails@odata.bind": [""],"Context@odata.bind": "Containers('OR:wt.pdmlink.PDMLinkProduct:188653')","Folder@odata.bind": "","Attachments@odata.bind": [""]}I am always getting "The binding link '' is malformed" exception.Thanks!!!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.