Recently active
I saw this post recently from Jay Baer and wanted to share it with you all. If you're considering launching a blog here on PlanetPTC (or even outside of PlanetPTC), you'll find this article interesting.Original URL: http://www.convinceandconvert.com/blogging-and-content-creation/content-lessons-learned-from-25-blog-posts/<HR>Content Lessons Learned From 25 Popular Blog Postsvia Convince and Convert Blog: Social Media Strategy and Social Media Consulting by Jay Baer on 9/21/10I’ve been writing Convince & Convert for more than two years, and have produced more than 300 posts. Mostly from me, with some terrific assistance from talented guest authors.Last week, I was on a content marketing discussion panel (moderated by Jeff Rohrs) at the ExactTarget Connections conference. I was joined by Joe Pulizzi from Junta42, Ann Handley from MarketingProfs, and Brad Kleinman from Online Marketing Connect. At one point we discussed headline writing and what draws clicks within the soc
This occured to me recently. We take our tools we use daily for granted. It might serve us well to step back and look at what we see every day with new eyes. It doesn't hurt to be an old codger like me (pre-computer). I recall in high shool looking up logarithms from a table and adding them to do multiplication. I remember using the C and D scale on my slide rule to do the same. Later, I even got a circular slide rule so the computations never went off scale. One of my first roomates in college had one of the first electronic calculators. His parents laid out out $400 for a machine that you can buy today for around 5 bucks. When it became time to learn programming (FORTRAN of course) it was on punch cards that you created at a monstrosity that was the size of a church organ. Of course such keypunch machines were in limited supply and when a major project was due it was almost impossible to find one. Thank the good Lord t
Just started teaching a GD&T class here at work and it is a blast. I am remembering that during my career many older, more experienced people helped me along the way. Having been through a long list of companies, the list of mentors is long as well. For that matter, I could include high school and college teachers as well. If you have not already done so, I would highly recommend that all of you try to teach or mentor others. You really start to learn when you are in the hotseat !! My question for the class today is, "Who do you remember being a mentor to you?" Wouldn't it be a great thing if someone 20 years from now thought of you and said, 'that guy helped me a lot !" ??
Plmservice what can we do: PLM Windchill setup, upgrade, migration and configurating.Support for Windchill system administrators and Windchill programmers.PLM Windchill software development.Pro|E - Creo software customization.Windchill user interface and business logic changes.PLM Winchill autit (Security, reliability, productivity).Windchill LifeCycles and Workflows development.If you interesting contact with Feofilov Ivan fivig@mail.ru.plmservice.ru
PTC recommends that you keep an eye on the queues. Workflows are heavily dependent on queues to function. There is good reason. Take for example this very useful OOTB expression robot:This robot sets the state of all the changeables on an EC. The helper code from PTC will fail if items are checked out. Users being users, often complete tasks with check out objects causing this robot to fail. It is very tempting to just continue the failed task in the Process Manager or set the state manually. This will leave the failed expression in the queue as a ticking timebomb, waiting for you to accidentally restart it. What's the harm in that you ask? Let me tell you what happens...So you have a queue that looks like this:You are having workflow issues and PTC Tech Support recommends you restart all these Severe tasks (robots may be in another queue, I forget which, oh and BTW, this did happen). The workflow has finished and your change notice is released
This is a cross-post from engineer-matters.com. Other content on a variety of engineering topics are posted there.I have to admit, I miss Boston. For seven years, I called the city home. The seafood is great. The history is impressive. The people are...well...blunt. But that's OK. You come to appreciate it.Luckily, I'm coming back up to Boston again the week of September 20th. I'll be attending a number of meetings, giving me an opportunity do something else that's interesting: interview engineers. While I enjoy posting my own perspectives on the issues that engineering faces today, I feel it's important to provide a platform for engineering executives, managers and practicing engineers to have their voice heard. These interviews turn into podcasts and vodcasts posted on engineering-matters.com. Do you have a story to share? Do you some sage advice? What's your perspective on engineering? I'd love to hear it. In particular, I'm interested in hearing about the issues outline below. But
Millions of creative product development professionals across the globe design, build and support great products every day. Planet PTC Community is a unique and exciting place to showcase the great work you create with PTC software, network with other product development professionals, inspire others with your success stories, and be inspired by the talent of your peers.How did we get started? Instead of falling into the “build it and they will come” trap, PTC Marketing wanted to be sure that if we built it, you would come. So we partnered with Forrester Research to build our own social technographics ladder to understand how you, our customers, are using social tools. The outcome: you weren’t just ready for a social application, you were eager for it."PlanetPTC Community is great because it encourages people like me, who have used PTC products for years, to share ideas and use cases easily. I'm also excited to connect with people from all over the world who share my intere
Finally done with the customization update for 9.1.There are some new stuff around ERP Connector in 9.1 that needed some rewriting in order to get it wokring but now it does
It is fun when the technical community is gorwing.The first two days of this week was introduction of a new hire, very good and fun
We have an apparent bug in the software here where I work. At least that is a major suspicion at this time. All of a sudden, certain datum references are dropping out of geometric tolerances. No rhyme. No reason. How can this wonderful tool that we have all become so reliant on suddenly flake out? I remember the tales of Microsoft building bugs into their code for 'job security' reasons. The theory goes that they will always have a job writing patches and doing updates. And of course, selling maintenance is how you make money. Someone here proffered the opinion (could have been me... ) that our current situation is the same type of scenario, but that sounds like the mind of a paranoid person (definately me... ). What do most people think about this? Seems like a very odd thing that something so deeply imbeded in the kernel of the tolerancing could suddenly lose its mind like that.... Hmmm..... ?
I can share data from Product to Project - but can't see how to do it the other way? Any advise would be welcome
Just Started the blog. May God have mercy on us all !
This is my first posting I hope to add the trails & tribulations of a CM personShall I check on the Contractor who is working for me? or shall I finish a creating the Glossary I am creating for a CM Work instruction......or brave the office to find the location of certain documents. Oh dear this all sound boring ...well more like mundane but I enjoy it
I was playing around in WF 5.0 the other day, and was trying to create a neat looking model using helical sweeps and trajpar. I think that the result is pretty neat so I thought that I would share it with the group. Please feel free to download it and investigate it. If I get time I would like to work on it a little more as if you closely you can see where the RH helix meets up with the LH Helix. It has to do with the angle of the sweep profile at the start and end. Anyway, I thought I would share it with the group and look forward to any suggestions/ comments/ ideas. I have attached the PRT file from WF 5.0 and also have attached a STP for those that may not have access to WF 5.0 yet.Thanks,Greg
Alan Belniak (PTC's Director of Social Media Marketing) has written a series or articles on blogging guidelines. Check them out today! Blogging Guidelines, Part 1: HomeworkBlogging Guidelines, Part 2: Things to Keep In Mind When Writing Your PostBlogging Guidelines, Part 3: Steps To Do For Every PostBlogging Guidelines, Part 4: Promoting Your BlogBlogging Guidelines, encore: After The Fact…
I covered this topic briefly in my PTC/User presentation. On one of my BOM reports, Internet Explorer puts a page break before long tables even though the table cannot fit on a single page. The result is like below, a mostly blank first page:while Firefox does what I would expect when print this report:Not sure why expansion criteria only showed in Firefox but that's besides the point. I have played with all the CSS options for page breaking. Nothing seemed to work or align the two browsers. So, I appeal the community. Help me understand what is going wrong and how we can fix it. Is this a bug in IE or is there something that PTC can change when rendering a table? Does IE 8 fix this?To replicate this, just grab any old product structure and use the Multi-Level BOM report that is OOTB. Switch to Landscape mode. I am running PDMLink 9.1 M020 if that matters. Kudos to any guru who can find a solution or enlighten me. This has left me with bloodied hole in my office wall and a nasty
Back at work and trying some new stuff
I downloaded a trial version of ZwCAD 2010 and tried a few edits and exports of current dwg drawings. ZwCAD biggest feature is its similarity with AutoCAD. You can tell by its Graphic User Interface that this is its main goal. I don’t think I’ve seen another CAD package look so similar to AutoCAD. I’ve searched a few sources on internet and it seems that its price is way lower than AutoCAD. An actual price was impossible to find. ZWSOFT is headquartered in Guangzhou, China, with branches in Europe and US. ZWCAD is ZWSOFT’s flagship product; they recently become more aggressive on US market from what I’ve read on CAD forums. If you use today AutoCAD 14 to AutoCAD 2010 manly for 2D ZwCAD could be the right less expensive replacement. From ZwCAD 2010, I was able to export in any AutoCAD version from 2 to 2010.Conclusions: ZwCAD 2010 is a CAD Software product from ZWCAD Software Co.,
Peter Rosenthal has figured out a way to get WF5 to work with Intralink 3.4. In a barbed post to PTC/User forum (login required), he details the steps. Basically, it involves setting up workspaces with WF4 and then switching to WF5 to work on files. I commend him on his ingenuity but I have to reply with "so what".I am not an Intralink user so I cannot share in the experience of converting to PDMLink or Intralink 8+ (though I have done a migration). It was probably a step backward in some areas and a step forward in others. From the ask the experts session at PTC/User, it was clear that there are a lot of customers who still have not switched and are angry about having to. PTC made this decision 2 years ago so there was plenty of time. Profit may have been a factor but you have to appreciate the support aspects of carrying two products that basically do the same thing (I am speaking of big picture functionality). Improvements have stopped a long time
Для просмотра русскоязычного видеоролика кликните на баннер справа или перейдите по ссылке http://download.ptc.com/products/mathcad/ru/index.html.
Подробный русскоязычный видеоролик обо всех преимуществах популярнейшей САПР — Pro/Engineer Wildwire 5.0. Видео включает конкретные примеры интерактивного моделирования, работы со сборками, проектирования машин и механизмов, подготовка программ для станков с ЧПУ и изготовление оснастки.Для просмотра кликните на баннер или перейдите по ссылке http://download.ptc.com/products/proengineer/wildfire5/interactive-tour/ru/index.html
4 города, более 600 посетителей. Смотрите, как проходил PTC Innovation Forum'10 и не говорите потом, что не видели!Презентации находтся на сайте мероприятия http://ptcinnovationforum.ru/ Video Link : 1188
http://www.cadcafe.de/groups/cocreate/
Back to work today. Time to fill out all those expense reports and try to wade through my email inbox.Speaking of email, did you know you can subscribe to get notified for new Technical Support issues resolved for the products you use? Go to http://www.ptc.com/appserver/cs/subscriptions/subscriptions.jsp and select the products you want to keep an eye on. When new issues are resolved (or at a scheduled interval) you will get an email to notify you of solutions to the products you are watching as well as software updates. Useful information for the Above Average Systems Admin.
Time to head back home. I really enjoyed the conference this year. I'm anxious to see how the new PlanetPTC conference goes next year. For now it's time to get back to the projects at hand. I look forward to applying the new techniques I have learned and continuing to pursue the goals of improving product development using the tools available to me. I look forward to trying to help with the adoption of new technologies in my company, such as, social product development, new techniques in modeling, system optimization techniques, CNC simulation and toolpath optimization.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.