Recently active
I got school in 6 and a half hours so I'll keep this short. We moved the wheel position of the shooters today. We are trying to get the balls to shoot more straight. I am confident we will think of something soon. We also took apart our robot today to propare it for powder coating for the next two days. In the process, we learned the importance of the tolerance of manufactured parts and preparing parts for proper use to aid in easy reconstruction. Today and tomorrow are gonna be clean up days. More updates soon.Build Season Counter: Day 38 / 46
Hey World!We may not be the fastest team when it comes to building our robot, but we are really good at pulling it all together during crunch time. Our Chairman's Award long essay is in the process of being perfected, while our short essays are done! Done is such a nice word. Our many components are being combined, including the brand new C.O.R. bin (or the Central Organizing Rectangular bin). In short this is our electronics tub. In past years we have always built our chassis and then put our electronics where it made the most sense. When the next year came around we would have to take almost all of our electronic components out one by one and then have to reorganize them. With the C.O.R. bin we can easily access all of our electronics and easily remove them from our robot. It was also mostly designed by someone named Corbin.Everything should be coming together later this week for us, and good luck to all the other FIRST teams!
Oh dear...I seem to have forgotten all about this blog thing over here...I will have to think of someway to make it out to you all. But in the meantime, here's a well deserved update.It has been one tough season, but it's not over yet. We are still behind our desired schedule by a week, not very good news when you are seven days away from unveiling your robot the an entire community who has watched and waited for magic to unfolded. However, I cannot complain about the progress our team, the FIRST Robotics Competition Team 1671 the Buchanan Bird Brains, has done. A few weeks ago, the CAD team was having unimaginable difficulties with Windchill 10. Problem would begin as soon as one started up Creo Parametric 1.0; an initial error message will appear, stating that connection between the coimputer and the server would be lost. Although this problem did not occur when we would try to connect via Internet browser, it denied the CAD team the ability to sync, download, upload, checkin and che
This day has been marked with test and trials, some problems and possible fixes to them, a final run down of necessary parts and things to do, a lot of food and fun, and a huge success for the 1671 Buchanan Bird Brains.Just a few minutes ago, we successfully configured our CAN (controller area network) Jaguar speed controllers to use the attached encoders to maintain a steady rate of revolutions per minute. Sounds simple yes, but it wasn't entirely. The programming team had to dig through documents and tutorials and configured the the CAN Jaguars' control settings and encoder initialization. I must admit, the quality of the documentation of the WPI Library is quite fantastic, that is if one knows how to use it. It is simple enough, but holds all the information a C++ programmer in the FIRST Robotics Competition would need to know.Keep checking out our live stream to see what we are up to. http://team1671.com or http://ustream.tv/channel/FRC167.1 Monday is a holiday, so we will be in sh
As PTC say in http://communities.ptc.com/servlet/JiveServlet/download/149015-19664/4859_DYK_Feature_Rendering_WP_EN.pdf on Best Practice #1:"A capabilitiy called image-based lighting (IBL) takes the guesswork out of lighting for novices. Using IBL, the user wraps a high-dynamic range (HDR) image around the model. HDR is an image format used for settings such as rooms or courtyards, and includes the correct lighting and color to generate the right reflections. The HDR image becomes the background for the model, which eliminates the need for users to manually position light sources. By using an HDR image, novices can instantly take advantage of expert lighting for use in their renderings. HDR images are easy to find, as there are millions of these images available for purchase or download via the Internet." Why not put some of them on Planet PTC, easy share by us?.HDRI_BackyardHDRI_Studio 015
A few simple steps how you can create an illustrations from 3D CAD data.(Automated design of vector graphics illustrations directly from 3D CAD data)Slovenská video-verzia (Automatizovaná tvorba grafických vektorových ilustrácií priamo z 3D CAD dát): http://tiny.cc/09r3u
Do you need create a flexible rubber hose?Here is short video tutorial: Video Link : 2398
customer having system failures. But they wants to calculate the reliability prediction of the system and availability of the system
Design anywhere, build anywhere is nothing new for companies - our economies and markets have been working on this model for quite a number of years no matter what business or industry you are in. However, the down side of design anywhere, build anywhere are the issues that go with broad globalisation. This is not new to anyone living and breathing globalisation and global product development but what is key is knowing how to deal with and approach the challenges. One such company is Weatherford International, a UK based oil field equipment and service provider. “Design anywhere, build anywhere” is more than just a slogan at Weatherford, product data management, global collaboration and PLM help to make it such. Weatherford recognise that they need to manage data that will live forever. Take a look at this 2 minute video and you will hear about how Weatherford deal with ChallengesGlobal CollaborationInnovation Value Watch the video: http://bit.ly/whDd6ARead the full story: http://bit.l
Use the Trajpar Parameter with a Variable Section SweepYou need your own spring, which is defined by its own shape?Create a new part with an extruded elliptical surface and a linear datum curve1. Create a new part called elliptical_spring.prt. Use the default template.2. Create an extruded surface with open ends (extrude it both sides using the dimensions shown below)3. Create a sketched datum curve through the center of the surface. Make its length the same as the extruded surface.Create a helical surface with a Variable Section Sweep4. Select created curve, then Insert > Variable Section Sweep...5. In the dashboard for Variable Section Sweep click Sketch ikon.6. Sketch the linear section shown in the picture below. Do not exit from Sketcher.7. In Sketcher, click Tools > Relations... The Relations menu appears and the Sketcher dimensions appear in the symbolic format.8. Create new relation: sd3=trajpar*360*6Note: where sd3 is replaced with the dimension symbol for the angular di
Having talked about “Best of” lists just yesterday, I might be well-advised not to warm up this topic again – after all, I don’t want to bore my readers. On the other hand, I can promise you this won’t be a long post and there is a reward waiting for you in the end… Again, it is part of my job to look back at the beginning of a new year and check performance, numbers, and results of the previous one. Today, I took a look at LearningExchange. As you know, this is a rather young service of PTC University, so we are keeping an even closer look on its development. The visitor statistics speak for themselves – page visits and unique visitors are increasing every month and we keep getting a lot of positive feedback from our users. I was wondering which of the videos was the most watched in 2011 so I took a look at the analytics dashboard. Turns out the clear leader in the video hit list -- with more than 7,000 views -- is “Boundary Blend - Curve on the Fly” – a 1-minute tutorial for Cr
As we continue into the build season and get closer and closer to our competitions we have done a good job of keeping ourselves safe. Here are a few things that we and other teams should keep in mind from the FIRST Robotics Competition Team Safety Manual as we go forward to make sure that we stay safe. When working in the pit/school shopProperly use power strips; don’t daisy chain, for example.Keep the work area neat and orderly. Participants should be wearing personal protective equipment, in the Pit at alltimes, including: ANSI-approved, non-shaded safety glasses with approved side shields. Rose, Blue, and Amber tints are FIRST approved, but reflective lenses are not. (eyes must be clearly visible by others)Safety goggles over prescription glassesWhen engaged in FIRST activities, all FRC participants must wear shoes that completely cover the entire foot. Shoes must have closed-toes and heels to protectagainst foot injuries, regardless of work location. Flip-Flops, Sandals, Mu
This is my first real post.. not much traffic here.Send me a note if you like what you see.Regards,David
Learning and Mastering
So that explains my absence! Sorry for not posting updates for over a week...finals, homework, and FIRST® Robotics were driving me to the limits of my productivity. Luckily now, with the former two out of the way, I can relay updates from from our 1671 Buchanan Bird Brains team during the past week. Note that the following updates are listed in no particular order:1. Finished Hoop Station with the help of our mentor and fellow CUSD teacher Richard Kinney. Tons of fun shooting the balls into the rims.2. Began total tranformation of shooter prototype, went to a four wheel, two top, two bottom firing system. Seems successful for many teams thus far.3. CAD base in PTC's Creo has under gone SEVERAL changes in the past few days. We will set a final design very shortly.4. Prgramming team has made progress on the camera tracking abilities. Hopefully this will give us a crucial advantage on the court.5. With the help of engineer Michael Stokes, the electronics team has begun using CAN (controll
Line to Square: Convert your sketched lines to any other shape Video Link : 2499 Two methods for Parallel key: Combine commands for your quick sketch Video Link : 2500 Sketch Scale: Create > Scale > Edit > Use >>> your Sketch - quickly and easy with Creo Parametric Video Link : 2502
Brushed, galvanized, scratch, staniless,machined, simple steel; how look that?On Creo/ARX is difficult to see before generate the render view the final result of many (for don´t say all) material appearances. So taking account of the model preview here is the real comparisson between all steels avaliable by default on the software.soon we will make new kinds of steel and other metals.
This is my first full post, and I was wondering what games are the most popular, so please do the poll I'm making.
Here's some awesome artwork I made (in a combination of Adobe Illustrator and Garry's Mod) a few weeks ago. Here's some links for bigger images:http://darthtater110.deviantart.com/art/Epic-Soldier-280706524http://darthtater110.deviantart.com/art/Epic-Demoman-280706133
Always when i want to render a product i prefer a full white space for a clean result; hightlighting the product, the default scenes of creo are pretty good but the only scene with all the room white have hard lights that sometimes doesn´t make a good result and also on the other hand creating or modifing the room, lights and scene for every model takes a lot of my time; recently i notice that we can create and save our environments scenes containing the lighting, room, and advanced rendering environment effects (.scn extension file) for use in other models.So expanding possibilities for the community i will share the environments that i setup based on some creo deffault ones.White soft cylindrical sceneWhite reflections rectangular sceneAny ideas for new kind of scenes, room or HDR environments?
Actually, it's week 1 and a day So far I've had the fortune to work with 4 different robotics teams...well, 5 if a 15 minute phone call counts.I've seen lots of plywood, okie-rigged thingamajigs and whatchamacallits. Not to mention Youtube videos, Chief Delphi posts and countless Facebook conversations.I'm happy to say that we have Creo 1 and Windchill 10 running well with our veteran team. 1 issue is a student's video card doesn't quite have enough horse power for loading the full assembly, even with setting graphics = win32_gdi So, looks like he is stuck with simpler asemblies, components and drawings.We ran across a wonderful find with one of the rookie teams. One of the students asked the coach to take a look at a Creo assembly of a robot frame. The coach thought it looked pretty cool and figured the student found it somewhere. Several hours later, the coach looked at the assembly and it had vastly changed. That's when the coach real
As the first week of build comes to a close we have noticed something really cool. We are on schedule! Go Ligerbots! If you are a veteran member then you know how important this is to creating a robot that we can all be proud of. All of our subgroups are communicating and drawing up their designs in Creo (some have even begun prototyping), a group is working on an equation in MathCAD, and the programming group is learning about code by performing tests and looking at code from past years. Other important events that happened this week were on Wednesday and Thursday. We had a specific time for mentors to introduce themselves to new members so that the team will know what their specific skills are and be better able to use their knowledge as build progresses. Looking forward to another productive week, and we hope everyone has a nice 3 day weekend!
"Fun does not equal easy" is what the above title translates to. And although this is an absolute statement, and absolutes are never true (yes, I see the irony ), I feel that this observation makes for a fair generalization. It is the difficulty of a challenge that makes it exciting and intemidating; it is the triumph of accomplishment that raises the human spirit into joy. It's what makes it fun. And if anyone does have an example of something is the fun && easy, I am sure there's a better antithetical example that he or she is overlooking.So what's point? Well put simply, for the 1671 Buchanan Bird Brains the past week of the FIRST® Robotics Competition has been fun, but also very exhausting. So far, I know of two sick girls, a man with a broken ankle, four asleep-in-class classmates, and a messy shop room. (Actually, its cleanliness can be modelled with a periodic sine or cosine wave with variable amplitude with positive values meaning "super clean!" and negative values symb
From what I can tell, Rebound Rumble (http://youtu.be/nOXsdhZZSdM) will deliver some of the coolest robots yet. It's impressive for people to shoot baskets accurately--my proof, the NBA. In my opinion, a robot with that ability is at least three times more impressive. And it seems the FIRST Team 1671 Buchanan Bird Brains will be one of those that will be sure turn heads and make points. So far, our CAD team has worked for three straight days, and it seems to be taking off from here. Our base is 85% finished. Really all that is left to do is draw the parts, check the measurements, and send them off to Harris Manufacturing or Pelco by Schneider Electric. And with a team like ours, it won't take too long. Soon, we will be heading into the design of the shooter mechanism. We already have some prototypes, but unfortunately, they are not operating at what we we call optimal level. Nevertheless, I am confident we will find what we are looking for.Moreover, FIRST Choice by AndyMark turned out
If you want to add or have some little issues adding some of the new materials of the Creo/ARX materials graphic library appearances by the Creo ARX community or PTC database you should... Check this out:VIDEO
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.