<strong>Creo Parametric related:</strong> Expert Machinist, CMM, Molding, Casting, Additive, EMX topics, and more
Recently active
I have a problem with the mouse in the mould base definition window, when I place the mouse over a plate it does not select to select it I have to move it either to the side or higher up,has anyone ever had this problem? if so how did you solve it?i have also tried with older versions but always the same problem.
I am in Creo Parametric 9.0.8.0. I am attempting to generate an MCD in Creo NC. I am able to generate an NCL file with no issues. However, when I try to generate an MCD file, after all of the prompts, I check my working directory and there is no file for the g-code output. I have attached an image of the log. Am I missing something here?
I can set up a new table add the repeat region and add in the "file path" (no clue what you call it) to each cell. ex. terminal information - mbr.terminal For the entry ports/pin I found this file path on youtube mbr.connprm.pin.name. when I first make the harness I designate the connector and assign each entry port a coordinate system to work of off and then add in the entry port when I designate each connector. It also looks like other things aren't working either like if I wanted the wire color or the wire gauge going to the connector. I know I'm missing something I just can't figure out what.
Hi, Is there any possible way to enable or use autosave in Creo Parametric 6.0 ? We are working with large assemblies and program crashes suddenly if you are working something complex. Thanks in advance, -Enes
Did PTC ever fix the volume not remembering it's name issue they created in Creo4 and (as far as I know) carried it into every version past? Last time I checked it was still there (must be years now) even though it was a known issue that broke the mold design package.
We use Creo 8.0.6.0. Is there a newer version of Autoaxis for Creo8?
Hi,did any of you has an experience with the following topic ?i searched the knowledge base and found only reference to old documentation.Many thanks,
We are being requested to provide an estimated clamp tonnage from our mold sampling department. Has anyone used Creo Tool Design to calculate clamp tonnage? Is there a feature for this? I know Creo understands molding surfaces versus molding surfaces, parting line, and the molding part has the material assigned to it. Therefore, It would be nice for Creo to provide the user a estimate as to how many ton (force) to keep the mold closed during injection.
Dear Admin,In PTC Creo, the "Mold Cavity" and "Cast Cavity" option are disabled in the Manufacturing module. How could I enable this feature.Best regards,Shahid IqbalFig : Shown as Grayed out
Hi everyone, I have generated some 4-axis tool paths using the B-axis (rotating the stock), However, every time I export the Gcode it only has XYZ movements. I know that my tool paths are not great and there is still a lot of work needed so any suggestion is welcome, however the most important issue I need to solve is that the Gcode it exports is different than the toolpaths. So any help would be appreciated. I'm going to leave the Creo (Creo 9.0) file and a screenshot of the CNC interface for reference. Regards,Andrea
Has anyone come up with a way to export the centerline of cooling lines or solids of cooling lines from a mold design? We are being requested this from customers and simulation contractors.
Has anyone taken the Creo Certification courses, and if so, was it worth it? Do you maintain your certification once you've earned it? I primarily work with "complete machining" extension. I've been using Creo since 2012, currently on Creo 10. I did a lot more modeling back when I started, but now we receive models from the engineering group and I use them to program the manufacturing. I did go about reaching out to Sales about the associated costs. My fear is that the courses are sort of entry level and will be a waste of my time. It appears that it may be an opportunity to see some of the work with the High Speed Milling extensions without having to purchase those licenses. Anyhow, I'd appreciate any input on how other's experiences have been with these certification courses. Thank you,Matt
If the surface is not flat, the displayed dimensions will differ from the actual measurements.
Hai all, Please refer below. Here the Smart hole chart option "Show hole ID" will show the individual hole position when selecting the respective table raw. It will be great if i can select the full set of type holes (Example A1-A4) to see where these holes are positioned. This will be helpful when showing the hole details in section view as i don't want to show same hole type in multiple section views. please let me know in any way it is possible. Best regards, Abhinand
HI, I’m having trouble generating NCL code for PostProcessor on the Mill turn machine. The machine is equipped with milling and turning heads as well as two spindles. I need advice on how to properly generate NCL code for both the upper and lower heads of the machine.If anyone has experience or tips, I’d greatly appreciate your help.
I am using Creo Parametric Release 11.0 and Datecode11.0.2.0When creating a milling step with complete machining extension, the tool name (created in tool setup) and step name (named in the construction tree) do not appear in the NCL file (and then in the ISO code for the machine).
Hello, everyone friends, please ask, creo nc how to use 5-axis processing glasses model.
When creating an NC sequence (Surface Milling), users can more or less control the Start Point of this sequence by changing the [Cut Angle] under [Define Cut].Changing the angle from 0 degrees to 180 degrees, changes the Start Point and cutting direction into the opposite direction.The created start point is ad random within the set boundaries (Cut Angle), so with a new sequence the Start Point could be different. I know there is an option to define a new Start Point, but it immediately goes to the initial Start Point of the sequence.So X1,Y1,Z1 (A) is the initial Start Point.A new Start Point, X0,Y0,Z0 (N) will be defined.The sequence starts at N and then goes to A.This is not what I want.It is possible to start the sequence from Point N without going to Point A? The main goal is to have the same Start Point (lower left bottom corner for example) for every NC sequence. Thanks
I am looking for a post processor that I can use to output cam files for a Mazak VCN510C-11 VMC machine. Does anyone have one or if not can you point me in the right direction to find one? Thank you
Hello,I want to automate the drilling process using XML – I am using UDFs to create holes and I want to add XML for drilling and threading. When I do this, I have, for example, 10 holes and 10 annotations with XML. In Process Manager, I call them, and even when I check AutoMerge, it inserts 10 drilling and threading operations instead of one merged drilling operation and one merged threading operation that would include all 10 holes in two operations instead of 20. I found this video (17:30) where it works, and I am not sure where I am making a mistake.https://community.ptc.com/t5/Creo-Parametric-Tips/Mfg-Automation-Tips-Techniques-Session-Recording-West-Coast/ta-p/820680
For whatever reason, Creo does not offer the ability to set a default clearance distance per machine. I do not always remember all the travels on our machines and would like to set default clearance values to solve that issue.I basically want to set a relation that states:IF work cell = "insert machine name"clearance = XX.XXHowever to do this, I need to know the parameter names to pull for the work center and the clearance, and I do not know them. Does anyone know what those parameters are, or know a better way to do this?
Hi,the tool path of volume roughing sometimes works from the outside to inside (correct) and other time as opposed to.I attached file manufacturing with a video for try the problem.The support dosn't help me because for they are correct this Works to product specification for Creo Parametric 😡 😡 😡 😡 😡.How can do it the sequence in other way? Thanks
Hi All,I am investigating the possibility of using creo parametric NC Milling to program a table top CNC Milling machine to machine PCB test boards that were designed in a PCB design software like KiCAD. Is this something that is being done with Creo currently? We would use this for rapid prototyping of test circuits by buying PCBs with a top copper layer and then machine away the copper between PCB connections. What would the workflow for importing the top layer and then programing the milling? Thanks! FYI, I am currently using Creo 8.0 with Advanced Professional Licensing.
How do you get back the classic nc step/sequences? ThanksMike
Hi, how i can get the postprocessor for DMG Mori 5 Axis Machine with Siemens 840 control.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.