Skip to main content

Filter by idea status

Filter by product

6851 Ideas

Rename layersAcknowledged

1. Describe the ProblemModelCHECK currently supports a "Layer Move" function that, for legacy parts, can create new layers, move items from old layers to the new ones, and delete the original layers. However, this process can disrupt existing layer states, causing unintended display issues. A solution is needed that allows ModelCHECK to rename existing layers—rather than recreating and deleting them—to preserve current layer states.2. Are you using a workaround?We are currently using mapkeys that require users to manually select the layer to be renamed. This approach is time-consuming, error-prone, and inconsistent across users.3. What is the use case for your organization?Our organization relies on layer states for both Model-Based Definition (MBD) and drawing documentation. To maintain consistency and avoid display issues, we need the ability to rename legacy layers without affecting existing layer states. This ensures that MBD views and drawing representations remain intact while updating layer naming conventions.4. What impact does this problem currently have on your organization?The current limitation in ModelCHECK impacts our ability to efficiently update legacy models while preserving critical layer states used in MBD and drawings. The manual workaround using mapkeys introduces inconsistencies, increases the risk of user error, and adds unnecessary time to the process. This reduces productivity, complicates standardization efforts, and may lead to incorrect model visualization or documentation if layer states are unintentionally altered.

Open more than one file (multiple files) at onceAcknowledged

1. Describe the Problem Currently there is no native functionality to pick multiple files from the file open dialog box for opening like there is in other widely used software programs.   There is a way to open multiple files if you are starting from a workspace but not from the file open dialog box. 2. Are you using a workaround?Using mapkeys, opening one at a time.3. What is the use case for your organization?The functionality should work like Microsoft Office Products. You can CTRL select to select multiple individual files or SHIFT to select range of files. The functionality should work conjunction with the search in the upper right corner. You search on a prefix, suffix and then from that filter you can then SHIFT select multiple files to open. For files like STEP files that require dialog boxes upon open, it should work the same way and just present the user with the dialog boxes in succession as each is opened.4. What impact does this problem currently have on your organization?This question gets asked a lot so there is an obvious community need: https://community.ptc.com/t5/System-Administration/Does-it-possible-in-Creo-2-0-opening-multiple-files-at-once-from/td-p/75438 https://community.ptc.com/t5/Addtl-Creo-Products-View-Sketch/Multiple-file-open-functionality-using-selection-ways-as-known/m-p/453810 https://community.ptc.com/t5/Customization/Opening-Multiple-files/td-p/265324 https://community.ptc.com/t5/3D-Part-Assembly-Design/Load-multiple-drawings-into-session-at-once/td-p/132827

dual_metric_dim_show_fractions to be general to any dual unit used.Acknowledged

1. Describe the ProblemI work with metric as my primary units and I want to have a dual dimension in inch, but to make secondary dimension (inch) format in fraction while primary dimension (mm) in decimal. As the configuration dual_metric_dim_show_fractions does only work if mm is in secondary dimension.I think the easiest solution here is to make that configuration not only for mm in secondary dimension but as a general for any unit as a secondary dimension, (and maybe can be named dual_secondary_units_show_fractions ?)2. Are you using a workaround?it's impossible unless I do a work around by: 1- changing model dimension to be in inch 2- make my drawing_units = inch 3- dual_dimensioning = secondary[primary] 4- dual_secondary_units = mm 5- dual_metric_dim_show_fractions = no3. What is the use case for your organization?Main working units are in metric but manufacturing works by imperial, so main CAD must be in metric while working drawings needs to be dual dimensioned in inch fractional format. And no drawing standard logic by making metric also in fractional, it has to be in decimal.4. What impact does this problem currently have on your organization?Manufacturing productivity decreases as it takes time for workers to convert decimal inches to fractions. Losses reaches multiple thousands of dollars per year in terms of lost time during manufacturing processes.

little debbie box tools as opposted to using sheetmetalAcknowledged

1. Describe the ProblemThe sheetmeal module is Creo is amazing.  Ive been teaching sheetmetal classes since 1992.  < I like to spell sheetmetal as one word probably because  Pro/SHEETMETAL established the legitimate compound word.  Designers typically use the Creo Sheetmetal module to preform little debbie type of box folding type of design.One recent class to industrial designers it was inquired if there was a module like sheetmetal that would allow for specifics for folding boxes like a Little Debbie box and work on specific layout etc.  I know there are specific software for folding boxes.   I would refer to this module as  sub module.  Maybe it works with surfaces and allows those surfaces to flatten. In this case those tools already exist but  maybe not meant to help designers work their magic on working packaging in this specific instance.  Fusion 360 even has a PCB sub module under it's sheetmetal functions.   I suppose from a market reach perspective there is a market for this functionality.  Many companies already use Creo Sheetmetal to do these box designs including Motorola, Dell and 20+ others that I could list.  The problem is Sheetmetal preforms slightly different flattening folding etc. The sub module would also apply graphics. Bart Brejcha designengine.com  2. Are you using a workaround?Designers typically use the Creo Sheetmetal module to do this box folding type of design.3. What is the use case for your organization?Packaging of products *making the box for the product shipping etc. The sub module would also apply graphics.4. What impact does this problem currently have on your organization?Customers suffer using Creo Sheetmetal combines with surfaces.