Recently active
I've been evaluating Creo 9 for company wide installation after the summer. I noticed that when for example using Extrude, one can set it to create a new body. The name seems to be greyed out, meaning that the user has to make the body and then go in again and change the name.Suggestion is thus to allow the user to directly change the name of the new body during creation.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Addin in CREO : DFMProRole : Developer 2. What version of Creo Parametric are you currently running?Creo 93. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.ProMdlDataGet() API is deprecated which used to provide device and host information of model. Any successor to get device and host information is not there in CREO 9 pro-toolkit. (You may refer to support case : C16423449)4. What is the use case for your organization?Need Device and Host information of a model for the functionality of addin.5. What business value would your suggestion represent for your organization?Wil be able to integrate the addin in CREO 9 with the requested information. Not having device and host information is blocker for the integration.
1. Environment: consumer goods with mainly injection moulded plastic parts2. What version of Creo Parametric: 7.0.8.03. Problem to be solvedAdd Add Arrows and Section Name in 2D drawing for views based on a Zone cross section (3D cross section). Question also raised in: CS150420 - Is it possible to add arrows for Zone cross section (3d cross section) in drawing in Creo ParametricCS250465 - Is it possible to display arrow and section name in graphic area for 3D cross-section in Creo Parametric Proposed resolution: To request this functionality, refer to Product Ideas @ PTC Community --> hence this product idea4. What is the use case for your organization?We would like to create shaded cross section view on 2d drawings to be able to communicate additional manufacturing information by using different colours to represent e.g. surface finishes requirements and/or interface areas.5. What business value would your suggestion represent for your organization?Workfl
Currently when selecting "Annotations" in export profile of STEP or JT format "Datums" and "Quilts" get activated but grayed out in Creo Parametrichttps://www.ptc.com/en/support/article/cs279094 If model is created with quilts ( some times construction surfaces), it can cause confusion to the end user.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Hello I am Kamlesh Kailas Joshi from GMMSPL (one of the value added reseller of PTC)2. What version of Creo Parametric are you currently running?I am currently using the Creo 8.0.3.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. During the creation of the Broken view, the broken line does not extend from the edge of geometry, it only showcases what it cut on geometry. So following image I have attached for your understanding. 1st scenario which is part of the Creo and 2nd scenario available with other CAD software. Dear team till the time Creo does not provide the 2nd scenario as per the attached image. And lot of designers are seeking for this kind of enhancement. so request you to acknowledge it. 4. What is the use case for your organization?It will add t
When defining a working directory in Creo, it would be useful to simply go to the folder above by clicking on this icon.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Construction, Lead engineer, all engineers 2. What version of Creo Parametric are you currently running?7.0.5.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When you make a mapkey and there is a need for user input you get a small window with a "Resume" and "Cancel" button below the message to the user. The "Resume" button is highlighted but when pressing the Enter key (on the keyboard) or pressing the scroll wheel, nothing happens. It would be convenient when it highlighted "Resume" button could also be pressed with the enter key or scroll wheel.4. What is the use case for your organization?This speeds up the mapkeys, especially when there is a lot of user input needed.5. What business value would your suggestion represent for your organization?Speedup the mapkeys.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Our organization is active in the field of construction machinery, combustion engines, and hydraulic components. I work in the IT department of the company, and we have a CAD-CAM integration project. We want to use the Model Based Definition on Creo Parametric (drawingless).2. What version of Creo Parametric are you currently running?Currently, we use Creo Parametric 7.0.7.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.I noticed that when we use the function ''Merge/Inheritance'', we can activate the option ''Toggle Inheritance''. This allows the functions of the base model to be inserted into the model tree of the final part (Ext Inheritance Cut). So associativity between the two models is possible, but only in one way (Parent to Child).The risk is that the inheriting part is modi
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I am Kamlesh from GMMSPL value added reseller2. What version of Creo Parametric are you currently running? Creo 8.0.1.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.In this competitive age, everyone wants to protect their IP by protecting files and data, especially Creo data.So it will be very very helpful, if we can protect our Creo part, asm, drw file using password, so that no one can view it without password.Following are the points that should be required1) No one can view the file2)No one can save as the file3)No one can modify the file4)No one can edit the program, relation, parameter.4. What is the use case for your organization? We can easily do this in PLM if I am not wrong, but what about the single, double, or triple seat of Creo Customer. So it will protect the IP
Hello everybody,It would be nice to be able to do exploded views with multibodies, it is needed in some case for casting parts with cores or assemblies defined with multibodies.Thank youRegardsLuis
Our company deals, among other things, with the production of ventilation elements and inspection doors. Personally, I deal with the design and implementation of new products, as well as the creation of the necessary documentation.Currently, our company does not use the WINDCHILL program.I would like to decide about localization of std.out file. Currently this file is created in default working directory. This localization is very special. I would like to have there only my own files.We use the PTC Creo program to design new products and create documentation.The option to save files in the selected location would save our time, which we waste in constantly removing unwanted files from the working folder. Additionally, it would keep order in the documentation directory.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Watch manufactures, CADManager, 2. What version of Creo Parametric are you currently running?Creo 7.0.7.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Export dxf direct from sketch without creating a Creo drawing. Possible with Solidedge4. What is the use case for your organization?Creating a drawing, orientated the sketch very long time,,,5. What business value would your suggestion represent for your organization?time savingOne point less with Solidedge competition Thanks
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Electrical Energy Sector, designing low-voltage switchgear. Product Design Engineer. Large construction firms, Direct Network Operators.2. What version of Creo Parametric are you currently running?6.0.6.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Picture a scenario. I have inherited an assembly with hundreds of components, and 70 of them are fixings. I want to tidy up my model tree, and improve the workability of the assembly. I try to group together a stack of fixings (a bolt, a washer, a second washer, a locking washer, and a nut) which are all related to the same fixing point. I select these components and click on 'group'. A pop-up appears "Do you want to group another thirty components that happen to be in between these fixings?" "No" says I. Creo cancels the group function because a
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Machine building, any industry working with Creo Parametric2. What version of Creo Parametric are you currently running?Creo 8 & 93. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.You should be able to dynamically highlight and select midpoints on model edges to add relations, just like it is possible to select the midpoint on sketch geometry when creating a sketch.It should be possible to dynamically highlight and select midpoints of sketch and edge entities while dimensioning in sketches.4. What is the use case for your organization?In the current situation, when eg one wants to measure between two midpoints of two parts in an assembly, the workaround is to add datum points on-the-fly. But this workaround is way too time consuming.Also it would be possible to select the midpoint of an
Cabling network continuity - Check in "CreoModel" Case Subject: Is it possible to find below cases using Model Check Tool.1.if cable network is not created in the Cabling module2.if the cable Network continuity is broken. - Throw error - "Network is not continuous" Note:-Add the above check rule in Creo ModelCheck Quality tool.Refer the PTC Cases.PTC Case: C16386209PTC Case: C16389110
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We're working in the automotive and industrial design. Currently we start using model based definition models.2. What version of Creo Parametric are you currently running?Creo 7.0.5.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Request:Set a surface finish for all undefined volume surfaces.Current situation:In order to get a semantic surface finish you need to assign a surface finish to each surface of the model.If you don't assign a surface finish to a surface you don't have a machine readable surface finish on the surface.Desired situation:Set a surface finish for common use of all not seperately user defined surfaces.Afterwards user defined surface finishes overwrite the comon definition.Removing the user defined surface finish restores the common definition. 4. What is the us
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I work as a Product Engineer for a large agriculture equipment manufacturer.2. What version of Creo Parametric are you currently running?7.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Very often, I am required to open very large assemblies (10,000+ parts). Everyone here always uses Creo View to open large assemblies like these and then only turn on the subassemblies we need. Once you get it down to the parts you only want to see, there is not a way (that I am aware of) to then open that same "Rep" in Creo Parametric. I would like to be able to use Creo View to filter all of the subassemblies, then open it that exact same way in Creo Parametric.4. What is the use case for your organization?Research, Design and Analysis5. What business value would your suggestion represent
In drawings, when placing annotations, hidden surfaces can appear selectable on the model.Hidden lines can be turned off with : select_hidden_edges_in_dwgBut there's no such option for hidden surfaces.See the example below of a section that shows surfaces that are at the back and should be hidden: 1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.All industries using 2D drawings2. What version of Creo Parametric are you currently running?7080 up to 90003. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.prevent miss-selection and incorrectly attached annotations4. What is the use case for your organization?2D documentation of parts5. What business value would your suggestion represent for your organization?General speed improvement during the 2D documentation process.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Application Engineer supporting PTC customers in BeNeLux area2. What version of Creo Parametric are you currently running?Creo 3 - 93. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.It can happen that some users accidentally save models with in an Exploded State. This is not ideal when the model is opened by colleageues.It would be valuable to set the default behavoir when opening models that contain exploded states. Especially a config.pro option that allows models to always be opened in the unexploded state (prevents models from being opened in the exploded state).Similar settings exist for Simplified reps, but not explode states (See CS215326)4. What is the use case for your organization?CAD administration, best practice5. What business value would your suggestion represent for your orga
Show annotations in 3D models and drawings Be able to easily show in the final 3D model and its drawing the dimensions and geometric tolerances created in the base model of an External Cut Out, Merge or Intersect function in the same easy way as with a Ext Inheritance Cut Out, Merge or Intersect feature. We don't want to give the possibility to create Varied Items in this case. The base model must remain the absolute reference. More simple, we need the benefit of the Ext Inheritance Cut Out, Merge or Intersect feature to show annotations but without the ability to create Varied Items.Base Model used as reference to create the Merge / Inheritance feature. Final Model with External Cut out, not possible to show annotations from base Model. Final Model with Ext inheritance Cut Out, possible to show annotations from Base Model. Drawing of Final Model, not possible to show geometric tolerance attached to the dimension in the base model because of External Cut Out fea
actual section preview for different material/standard to be added in hatch pattern tab, currently its like user can only see after add into component, if its not what user looking for user need to add it again and see, this will consume time and repetitive work suggested idea can save time and easy for user to select actual section pattern in one shoot
In drawing when I create an assembly cross-section I have to change manually cross-hatch space and angle for any part. I think its possible an automatic mechanism that flip angle and change space for any parts. Now If I have 100 components it's an hard work!!
ISO surface finish symbols still follow the ISO 1302:2001 standard. An SPR 998114 was filled in January 2003, and the reolution was: We are currently not supporting the ISO 1302:2002 standard No plan to improve this standard exists at the moment Can this now, 9 years later, be included in PTC plans?
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Area of Machine Tools2. What version of Creo Parametric are you currently running?CREO 8 M0303. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. While adding a new surface finish symbol in MBD, it would be time saving if we could attach the last placed surface symbol. In Creo 8.0 a Repeat Mode command has been added allowing to continue placing multiple symbols in one action.It would be great if there were a similar command for surface finish symbols too. Every time we add a surface finish symbol in the model, we have to select the symbol in the browser and define the roughness height. This becomes a losing time for repetitive symbols. 4. What is the use case for your organization?Annotation in MBD5. What business value would your suggestion represent for your organization?The
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.