Recently active
Problem: We use in Creo 2 following Toolkit function “ProDimensionJogCreate”. So we can sort some dimensions manually on 2D drawing with Jogs. In Creo 4 this function was moved to another licence package called “TOOLKIT for 3D Drawings”. So we have a missing feature on customer site. Solution 1: Move function back to standard licence package “TOOLKIT”. This is our preferred solution. So we have no need to change our code. Solutions 2: Provide a new function with similar functionality in standard licence package “TOOLKIT”.
Creo Parametric: 5.0.3.0 Module: Assembly Config Option: open_simplified_rep_by_default Automatic Rep REFERENCE: SPR 8112265 CURRENT ISSUES: Automatic Representations are showing us incorrect geometry for family table models, old files and for models with assembly cuts. The message log shows that it knows there are issues with the graphical representation. RECOMMENDED SOLUTION: Option 1: When Creo has an issue with the Graphical representation, the software should automatically use master representation for that component. Option 2: Fix Automatic Representations so that is shows correct geometry See photos for specific issues and justification JUSTIFICATION
For MBD a part can have a lot of combined states... If I create an inheritance part I would like to have the possibility to copy automatically the combined states in the new target part. The combined states should have the same orientation plane (if exist in target part of course) If a X-Section does not exist in the target part, no X-section in the target states. No shown annotations in the target combined states, they are not the same (ID different) and not sure the user want them. Actually we copy the part, delete all features & create the inheritance feature. Not very nice. Thanks.
It is not possible to assign supplemental geometry (sketch curves, axes...) to combined states for inheritance parts. For exemple, on image below, what is possible in a classic source part but not in the inheritance model....
there is NO Toolkit API yet available that could write the ProMechModel object/handle that was generated by API ProMechmodelGet() to a file If we can open this file in Creo then it will help to check how ProMechModel is created (for example which faces, edges are merged from Native model). This will help a lot before setting and meshing analysis.
Ability for pro/program to swap out instances of a merge/inheritance model in a .prt similar manner to how components are changed out in a .asm. Compatibility with interchange assemblies would be nice as well.
When exporting in U3D PDF, there is no option available to chose the units or use the CREO model units. All U3D PDF are created in meters regardless the model units in CREO. This can give some scalling issue using U3D PDF in other software. An option in UI or and the config.pro to use the model units or to select a given units will be very help full. Why use meter when the CREO model is in millimeters.
Testing Ideas
When importing in a part DXF, STEP... files from different suppliers, a huge number of useless layers are created. Sometimes more than 300 layers: 0,1,2,3,4,5,6,7......299,300...please see image below. These layers will be present in all assemblies, sub-assemblies, drawings...not good ! We try to delete most of them with Modelcheck but it should be great to have some config.pro parameters like : DXF_IN_LAYERS_IMPORT YES/NO STEP_IN_LAYERS_IMPORT YES/NO ... Thanks.
Expanded family table repeat region report symbols. Example: Report symbol &fam.inst.param.PART_NUMBER would only list the family table values from the "PART_NUMBER" parameter. This would replace the usage of a filter.
Example: &fam.inst.param.value == &dwg_name Very useful for automatically filtering family table records by drawing name and many other applications.
Currently lookup_inst match mode is only set once and applies to all parameters being searched. Searching for a ring shaped part (such as a forging for a machined ring) and ensuring that the OD is large enough and the ID is small enough requires creating an additional parameter (ID2) to invert the ID value (ID2 = -1 * ID) so that a "greater than" search can be used to find a smaller ID. Forcing an across-the-board match mode also makes it impossible to mix dimensional searches with string searches. If the match mode is unique per parameter these problems would be solved. Example: lookup_inst("forged_ring.prt",1,"OD_forge",OD_mach,-1,"ID_forge","ID_mach",0,"MATERIAL",MATERIAL) This example would make sure the OD is larger, the ID is smaller, and the material is identical.
Scenario: Working in a skeleton - want to drive features unrelated to a specific pattern of planes using the dimensional values of the planes Idea: Allow for pattern relations to be created with a single click of another pattern. Implementation: Add a check box or flag for "reference info" and allow the user to select an existing pattern as the reference. Implement code so that when this option is selected the P### and the D### value of the child is forced to be identical to the parent IF CHECKBOX=YES THEN P=P D=D ELSE Accept input
I would like a notification flag if a feature (for example hole pattern) is entirely outside the model, not only a warning: Thank you
Hello, add new drawing option for "symbol_font" as "font" allowing to use all symbols from the font. In a case we have symbols like ± or Ø defined in font all of them ignored and replaced by Creo symbols. It is unhandy to modify symbol.ttf to get the result when symbols are already defined in my custom font. Here you can see how Creo ignoring my custom symbols (green) driven by font and replacing them by internal symbols (red).
For Dimensions, there are two placement options for GTOL's: "dimension elbow" as well as "on dim" (below dimension). For notes, there is no such “on dim” (below dimension) placement. Currently, only “elbow” placement exists. "elbow" switches the leader type to underneath the note and runs it the width of the note to attach the GTOL to the end. Currently the only way to add a GTOL to the bottom of a note. To force this, the GTOL needs to be placed separately and referenced inside of the note using &g## (for model based GTOL's) and &dg## (for drawing based GTOL's). Please add a "on note" placement option that acts like the "on dim" placement option.
I mean a smart/rapid functionality that permits the transition among the Creo's windows.In wildfire there was the possibility of using ALT+W (that was a convenient bottons combination) + #number: you could pass easily through the windows.It would be clever also a specific implementation on the 3DConnexions' devices.
Please fix my gripes with how Creo presents and processes filenames.First, note how the system is inconsistent about the letter case of filenames:You specify McMaster_94729A325.prt in the Save-As dialog box, and the system writes it to disk as mcmaster_94729a325.prt and it shows it in Windchill as MCMASTER_94729A325.PRTIn addition, in the status line and in the message log, they will show up sometimes lowercase and sometimes uppercase.Gripe #1: When specifying a filename using wildcards, the file-open dialog only finds names in lower case letters:I submit that in both cases, the file should be displayed.This idea has been mentioned before: File Open Pro Engineer > Case SensitiveGripe #2:Selecting the filename text from the message log could be a better time saver. If you double-click on a filename shown in the status line, Creo will select the word and you are able to copy this text to the clipboard. You can then paste it into the file-open dialog box. I often use
Hello all and good morning, I'm using "PTC Creo Simulate" from 6-7 years. And for loads units I have typically used Newton (N) or Kg. Ever I used the unit Tonnes (Ton). Some my customers always use a unit of Ton. But today Further to a assessment of a customer, I discovered that the Ton unit, not international, is "American short ton". That means that to change: 1 ton (short ton American) 8.8964e + 3 = Newtons This is a problem that the value is less than 10e + 3 N If higher, the difference would be envisaged as a safety margin. But to be lower, depending on whether they are 10, 20, 5 or 30 tons, the differential increases considerably. Please I think it would be important to add international unit tonnes Thanks for all and BR, Gorka Garcia Lopez Consultant Engineer Applications (PLM FEM CAD) Integral Innovations Experts (Partner of PTC Spain)
In Creo Parametric 3.0 the functionality was changed so that when a workspace is changed in one running copy of Creo Parametric 3.0 it changes in all of them. This prevents the ability to compare two different versions of the same object without having to disconnect from Windchill PDMLink or backup and rename the old version.
It would be convenient to be able to have 2 options when we add countersink : 1)"up to selected" when defining the contersink depth (I need another sheme cotation) 2) Add chamfer option for the countersink
hello,in some case, when we use Cetol from Sigmetrix for make an analysis of variation on our part; we must drive the tolérance of dimension from inhéritance feature In this case, the control panel of the dimension disable the tolérance.It's a problem because we can't use this dimension in Cetol.Nevertheless, this dimension can be modify when we use the variant tool in inhéritance feature. (but Cetol can't use this variation...)It would be pratical to enable this tolerance in the control pannel of dimension.We have the same problem with geomtol issu of inhéritance feature
For some users usually working in the company network with floating CAD-licenses, it is important on e.g. during an on-site installation to be able to work with Creo to open CAD models for a longer period than the 14days currently available for borrowing. Therefore 14 days seems an unnecessary and serious limitation of the flexnet-license server.This idea proposes to unlimit the duration for borrowing a license or at least to set the maximum limitation to a much longer period e.g. 150 or even 365 days.This will not affect PTC's sales possiblilities for licenses because there is already a workaround, by having one license and one license server running with a small exchangeable USB-network-card on the CAD-laptop.In my feeling as user it would even increase the satisfaction with this nice piece of CAD-software if such an operation would not need a workaround but would be natively supported and easy to use.P.S. As I can see, quite a few people were intrested and reading this idea. I would
Please provide the ability to control the gear pair pitch circle via a parameter (that stays permanently linked) or via relations. Today if the gear size changes (either manually or automatically), there is no way to automatically update the gear pair definition. Manually entered values have to be typed in, every time, for every gear pair. Very un-parametric.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Space, MCAD Admin, Engineers2. What version of Creo Parametric are you currently running?8.0.5.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When creating a new sheet by Copy Sheet, the result is not exact. Custom view origins reset, dimensions disappear, etc. Copy should result in an exact copy. If shown dimensions are not allowed to be copied, they should offer the option of being switched to a reference dimension.4. What is the use case for your organization?Reusing views and sheets5. What business value would your suggestion represent for your organization?Lots of time saved, and less rework
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.