Recently active
Please add an Auto Chamfer feature similar to the Auto Round feature for symmetrical chamfers.
I would like to know in the changes control window, which parts volumen are changing (there is the same about the position).Nowadays as we work with parts sustractions if we consult the parts changed CREO informs that all the parts substracted to the main has changed instead of not really been changed.
Currently the Back Up References command does not back up the references of surface copy features (). It also does not back up the references of simulation features. I expect the command Back Up All References to not just selectively back up some references but to back up all references.
Current Creo could not dimension the arc full length. Hope to improve the dimension system to get the widely used arc full length dimension rule. See below
CREO should have the ability to create a rough offset from surface. This is very useful, for cast design, and also tooling designSee the example, from other CAD applicationhttps://youtu.be/Bfv0kEa8W_w
組み合わせステートに追加されたアノテーションを組み合わせステートを開かずにどのステートに属しているかを確認する機能を追加してほしい
In AAX, it should be possible to publish a sketch, and in the part that have received this copy, it should be allowed to extrud it (or create any other feature), without the need to project it to a new sketch.
Issue:There is sometimes need to produce Fringe plots with user defined content in the Creo Simulate post-prosessing.Today:Computed measure functionality on can be used to calculate user defined measure results. Unfortunately today it can be done only per point rather than fringe plots. One can combine this with Behavioural modelling (Field points, User Defined Analysis) for the required results, but computation time is HUGE.Sample cases:Hill-48 yield function (non isotropic VonMieses)ASME BPVC.VIII.2-2015 section 5.3.2 (combination of primary stresses)
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo parametric 9.0.5.02. What is the problem?While creating drawing in Creo, we have to give too many repetitive Geometric tolerances and their symbols with multiple clicks. Which consumes lot of time.3. Are you using a workaround? If yes, please describe it.Manually writing values again and again4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Format painter allows to copy values and attributes of dimension, tolerance, GD&T frames from one dimension to another dimension in drawing & MBD. It saves time and efforts. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)More than 100 users affected. Approx. 500 hours per year can be saved.
1. Describe your environment: What is your industry? Heavy manufacturingWhat is your role in your organization? CAD Product Manager/Product OwnerDescribe your stakeholders.Design engineers2. What version of Creo Parametric are you currently running?Creo 7.0.5.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When users are trying to modify their local config.pro in their Start-in directory, they will mistakenly use the "Export Configurations..." option, which will export ALL configurations, even those set at the corporate level in the loadpoint directory. The effect is that their Start-In directory config.pro conflicts with corporate settings if they were to change. 4. What is the use case for your organization?Our config administration allows Start-In directory config.pro modifications, but users are not trying to export entire config.pro, only those which they have modified.5. What business val
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?CCX in all Creo version2. What is the problem?with SAX it was possible to set a CTI value using Material Parameter. We lost this capability in CCX.it was very useful to standardize and automatically apply a CTI to a model..3. Are you using a workaround? If yes, please describe it.no workaround, we need to specify CTI parameter manualy at each model.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.the Idea is to implement a lost feature.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)that affect all CCX users; they loose time and standarization
I recommend you get with the times and make a wossname FLEXnet server that runs on generic Linux. It is rather grating that we have to use Red Hat Enterprise Linux at $350/yr just for a license server when everything else runs on gratis Ubuntu here. There are other software providers that also use FLEXnet for their products, and the requirement is something like "Kernel 2.6 or newer".
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 8.0.8.0 2. What is the problem?Reference: Case - 16406179 SPR - 13945104 Article - 373237 If we are working in design exploration, and update objects in our workspace that are in the current checkpoint, a new checkpoint is created which flags those items as modified. If you are not in session, updates to the workspace do not cause this problem. However, once the problem occurs, there is no way to undo it. This was noticed too late by our users and now when they try to push a checkpoint out, it includes hundreds of instances from family tables that are also getting pushed out.... because they were in the DEX modified session. Cleaning up these issues are very difficult. Please enhance this capability, as we can't use DEX if it has such large gaps in workflow.3. Are you using a workaround? If yes, please describe it.No. We have
This is an enhancement request to support all system-level, model-level, and component-level parameters in model annotations. There's a long list of parameters available (https://www.ptc.com/en/support/article/CS133915), but many of them can only be used in drawing annotations. We want to be able to access these parameters in model annotations too. And of course, this implies they are fully supported in Creo View as well. Thanks.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.3.02. What is the problem?We draw kinematic skeleton assemblies to describe a linkage system with fixed pivot points, constant member lengths, and one actuator. This skeleton pushes data forward into downstream component models. The length of the actuating member changes, and during development, so do the fixed points and lengths. I use copied dependent sketches with varied items and vary the actuator member length to show the system in various states of travel- this is quicker and much more efficient than drawing a new system and constraining it to parent members. When you modify the parent (copied) sketch creo automatically changes the name of the children sketches to "Copied Sketch ##" This makes the model tree cluttered and disorganized as the children sketches should have names describing the system's state. How I would like my model tree to lo
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 5.0.4.02. What is the problem?Please add the ability to create a broken view perpendicular to an axis instead of just vertical or horizontal break lines.3. Are you using a workaround? If yes, please describe it.Create a second partial view and manually align it.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Long wires attached to a part.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Confusion for the next person that works on the drawing.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 8.0.8.0 2. What is the problem?Reference: Case: 15985425 SPR: 13172667 Article: 351209 When we convert a model from one unit to another, any regular "Real Number with units" parameter gets updated properly. Both the unit and the value changes. However, the mass properties units only get updated, the number stays the same as the old unit. For instance, if the value for PRO_MP_VOLUME is 1in^3 and then the model gets converted to metric, the parameter will now show 1mm^3. The value should be updated WITH the unit automatically, like a regular parameter. Having mismatched data like this, can cause serious issues downstream.3. Are you using a workaround? If yes, please describe it.We need to regenerate the model after the update, before we get the correct values. However, until a manual regeneration is done, there is a signi
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametrics, 8.0.4.02. What is the problem?Missing options to define links and relations between: Saved Orientation / Annotation Plane / Combination State, and force Annotations more automated to take on definitions without loosing them again. Currently I'm working out a MBD Process (or try to do so) for our RD&E team. The aim is, that all Annotations are created in 3D by deriving dimensions from 3D features and enhance them by additional Annotations e.g. GTOL, text, Symbols and so on. All this is proper sorted in Combination States, using Sections if necessary, or datum planes in case the Annotations need a specific offset from the geometry. The intension (my future vison) is, that the Combination States shall represent the views in 3D and they shall be used in 2D drafting to create the views there (because this will remain a mayor requirement
API used: LoadProEAssemblyAllLevelsIf Model loading fails for a specific component, API currently does not return details of which component caused the issue.The API has option to exclude components whose loading fails and continue loading of remaining components. But enabling this option, skips components even with minor errors, which were getting loaded earlier. Also, the API does not provide a list of components which were skipped rom loading. This data is critical to highlight to the user which components are not loaded.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 7.0.10.0 using Panzura CloudFS global file system to access model content2. What is the problem?When using Panzura file system, new data and folders that are being created in Pazura are not immediately available in Creo Parametric File Open window. Workaround to create a new folder to see the previous folder display is needed. Seems Creo Parametric File/Open does not support the technology from Panzura to be able to use cloud file system to open data.3. Are you using a workaround? If yes, please describe it.When issue occurs, user currently has the following options:Manually type in the name of the new folder within Creo Parametric.Wait for the folder to become available; may need to select the Refresh button.Exit and Restart Creo Parametric.4. What is the use case for your organization? Describe how your idea would work in context or how it
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?creo 8 2. What is the problem?when i delete a SEARCH_PATH using the configuration dialog, i would like it to be dynamic, without needing to restart Creo.3. Are you using a workaround? If yes, please describe it.change a config.pro, close creo/reopen creo4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Allows for time saving5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)low, but would be nice to have.
Spoiler (Highlight to read)core functionalitycore functionalityImprovement required in Creo Parametric for retrieving and linking files with assembly and drawing. Currently to retrieve the files from different folder is through search_path_file config option through search.pro file or from adding search_path config option.This needs to be improved by directly linking the files from where they are saved. Same functionality is there with other well known CAD tools like Solidworks, Inventor, Solidedge. In Creo Everytime we open assembly the models failes to retrieve if search_path config or search_path_file is not set. Also if models are renamed without opening assembly or drawing, assembly and drawing fails. For file auto retrieval in Creo there should be some config option to control this behavior retrieve_files_from (default value -> file directory) (options to set-> from directory, search_path_file(for legacy users), search_path(for legacy users))
Over the last 20 years of Pro/ENGINEER and Creo Parametric use, we have accumulated around 100 to 150 "standard" mapkeys in our company-config.pro.Unfortunately, it is not really possible to track which of these mapkeys are actually used frequently and which are hardly ever used.Therefore, it would be a great feature if the frequency of mapkey usage could be tracked in Creo Performance Advisor.This would be a great way to determine which mapkeys have a raison d'être in the central config.pro and which ones could rather be cleaned out.
Hi, I am wondering if it's possible to have dual dimensioning system with primary dimension in millimeter and decimal and secondary dimension in inches(fraction)? When I try to combine them to display millimeter and fraction the decimals for millimeter is not shown. Is it possible to have them displayed also? (see image as an example). Thanks in advance.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8.0.52. What is the problem?Tables brought in from file do not follow the existing DTL settings in the drawing for fonts.3. Are you using a workaround? If yes, please describe it.Yes, every time we import a table from file we may have to select it and set the font settings to match the drawing it was imported in to.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Working (revising) on older drawings we have to do extra steps to ensure that newer tables will be consistent with the style of the existing drawing.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)We work with many older drawings and remembering all of the settings from times past is cumbersome.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.