Recently active
In an assembly cross-section, we want to create and use rules. With this rules we can define models which are not shown cut.
Please fix the Cosmetic Groove Feature so that the sketcher works like any other Feature should. Currently, if I Edit Definition of a Cosmetic Groove and then select "sketch", the sketcher comes up. So far, so good. However, if I now want to edit the "sketch setup", the Menu Manager pops up like some archaic way of changing the sketch orientation. There isn't another feature I use that does this when going to the "sketch setup". It poses particular difficulties when copying a cosmetic groove from one model and pasting into another. Thank you in advance!
As there is not offcet function,in EXTRUDE of CREO,I require function addition. The convenience that there is an offset function by a certain CAD software.
Referencing the video in the link below regarding engraving a text sketch on a curved surface. This technique will fail if the text is referencing a parameter that varies by family table. The suggestion is to make the Offset - Expand feature accept the text sketch so that a second sketch won't be necessary. https://learningconnector.ptc.com/content/tut-4756/engraving-text-into-solids
When creating a draft there is no way to define the default draft angle. There should be a way to at least define a different default value, maybe even a list of default values.
As the subject suggests, this enhancement would result in API support for the weld tool/extension/functionality that already exists in Creo 4.0+
Using the family table flat pattern the user was able to exclude selected part features from the flat pattern instance. This was useful for removing features that depicted post fold operations or items like representations of sheet-metal fasteners. (PEM Studs ect) The Sheetmetal Flat Pattern Simplified Representation can not have features added to it. Attempting to do so generates "Cannot exclude features for Sheetmetal Flat Pattern Simplified Representations" There is a workaround to create an unbend and a bend back feature at the end of the model tree. Then create a manual simplified rep that excluded the bend back feature and the surface feature. It is additional work and is not exactly the same thing as using the flat pattern feature. Since the flat pattern feature is a special feature it has some additional options and also must remain the last feature in the model tree. That being the case any additional features added after the simplifi
we would like to have access in a drawing of the "Specification list" defined by Option modeler, in the same way of simplied representation that are avaliable...
I won't get the parameters of standalone annotation (wfcGTol, wfcWDimension, etc). If I call function ListParams() or GetParam() by annotation (wfcGTol, wfcWDimension, etc) object it gives exception as a toolkit error. We had raised the case regarding this and PTC replied "for a standalone annotation, a visible Annotation Element does NOT exist. Only an internal Semi-Annotation Element exists. There are No public Creo Toolkit or OTK C++ APIs currently available". So could you share API to access parameters of standalone annotations?
Copy combined states and annotations to another 3D models. With this function, annotation creation time can be reduced.
For creating new drawings, Creo drawing Templates have a lot of advantages over using drawing Formats. This includes the ability to preset drawing notes, drawing tables, drawing views, drawing DTL settings, robustly link to Windchill parameters (like PTC_WM_REVISION), etc. Please make it easier to guide users to Templates over Formats for new drawings - see images below.
When you have a sketch with a bunch of holes, and all of the holes are the same diameter, so you dimension one of them and then use the “equal radii” constraint to make them all the same size. When you go into your drawing sometimes when you show the hole dimension it isn’t in a good place for it and you want to move it to a different hole in the view/drawing. Since all the holes are the same, because of the equal radii constraint, it would be nice to be able to click the shown dimension and have the “edit attachment” button work where you can move that shown dimension to a different hole location that works better with print/view. This works when you have created a bunch of rounds in the model, you show the dimension, and then pick it, and click edit attachment and all the rounds of that size in the same feature highlight and you can pick a different round and the dimension will move to that radius. Would like the same thought process to be done with sketched d
When user is working in assembly environment, by default, and activates one part the complete assembly turns to grey, and with transparency. There is an option to remove this effect. dim_inactive_components never But as user I see a lot of advantages of having this, much easier to see what part or subassembly is active, but at the same time, the graphic cards, has a lot more to process. So I suggest to have an option to turn all of the other non active parts/assemblies as grey, and non transparent. I know that there is a config option to turn off transparency: transparency no But with this, user is unable to use transparencies in models.
It is general practice to create projected view and adding cross sections. But some times, designer/draftsman forgets to add arrows to its relevant view. It can be avoided by providing solution by PTC, which enable user to pick its relevant view as mandatory step to add section arrows, immediately after adding section, like detailed-view method which allows user to pick a view. I face such issues while checking some of printed drawings and difficult to locate it relevant section because arrow line not added on respective view.
When importing an assembly from Inventor/Catia/Solidworks, you get the option to have a structure only representation, we'd like to have the option as well for Creo Elements/Direct Modeling. See images attached.
When changing from kg to kgf, each one is corrected,I want to add a function for character string search and replacement.
I draw a double line when correcting a note, but I cannot multiply the note by the width factor. I want to be able to multiply the width factor for double line notes.
When importing a large assembly, every component is getting a geometry check error "Original import surfaces have been split into highlighted pieces due to G2 discontinuities." This causes issues when show_geom_checks_on_creation is set to yes. We are talking about hundred and hundred of files. In addition, we have a very strict policy about geometry checks. Yet, when I go to edit the import feature, and just press the check box, the geometry check error goes away! Why? Can we prevent the geom check from coming up to begin with if it isn't 'real'? According to CS242220, this is common when importing files generated from solidworks. I don't care whether a cylindrical surface was split into two by Creo. This is more of an FYI. It should definitely not give me a geometry error. We don't want the user pressing the CONTINUE button hundreds of times when importing these large assemblies. Please help! Thanks!
It should be possible to alternate dimensions on Sketch. See the example: If we want to change the position of the point to the oposite direction, today we need to put a negative value. To keep the point in this side of the axis, the value should always be kept negative. My sugestion, is to create an alternate position option, for change de direction of the dimension, and the result should be like this:
There should be an API to get the default text height of 3D Annotations. Currently, It returns the value as "Calculated"
Hi,As we know, Many times creo get crash and designer lose his all works. Creo not gives a chance to save model at the time of traceback.So the idea is, creo should save model automatically before get crash or should be able to get one step undo after selecting cancel so designer can at least save there work and avoid suffer for work loss.Thanks,Prashant Pandarkar
Editing Creo Pattern Tables in Excel should be as easy as editing Creo Family Tables in Excel. There is a config option "part_table_editor=excel" that can make editing a pattern table easier than Pro/Table (the default editor) or a text editor like notepad. However, this config option simply sends the default .PTB file to Excel. Now when you try to save any changes to the .PTB file, Excel will offer you several options to save this file in another location or another format (.XLSX) instead of just saving back to the .PTB file in your working directory. If you have successfully chosen the correct option to save the file (see examples below), you next have to close Excel. Excel will prompt you AGAIN to save the file (even though you just did)! If Creo would simply start the process of editing the pattern table by using a .XLS file, Excel would have no concerns about what format to save to. Note that pressing the “Edit in Excel” button in a Family
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? Creo 8 to Creo 102. What is the problem?Since Creo 8 was introduced, when installing Creo Parametric, the tick box to install Creo Simulate has been disabled so Creo Simulate does not install unless you tick the box. This is the opposite behaviour of earlier versions where the Creo Simulate installed by default as this box was ticked. 3. Are you using a workaround? If yes, please describe it. Tick the box!4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. We provide Technical Support for PTC products and the change in behaviour has caught out many customers, especially those upgrading from a version lower than Creo 8 who did not expect this change. We believe Simulate should install by default unless the customer decides they don’t want it ins
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.02. What is the problem?Creo Illustartion APi required3. Are you using a workaround? If yes, please describe it.NO4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Need to automate the Creo illustration5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.