Recently active
While creating a mirror of a part for our MBD project following issues were observed: Issues: 1.If I am mirroring a part, with dependency and without features, which have annotations then the mirrored part will not have all the annotations which the reference part have. Also the mirror part will not have the start part which is used for the reference parent part. So overall MBD information which parent part have will not get reflected in the mirrored part. 2.If I am mirroring a part with features then all MBD information get reflected to the mirrored part. In this case I can also generate annotation required for MBD. But the major issue I observed the dependency breaks while mirroring the part with features. This will become difficult and time consuming to make changes in both parts accordingly. 3.For both the above cases if I am mirroring a part then only FRONT PLANE is the symmetry reference plane. So if any user want to mirror a part with reference of other plane then it would not b
Although having set "FILE_OPEN PREVIEW DEFAULT COLLAPSED", the program after a while automatically re-proposes the preview window in the file open window. Looking at the behavior of the program, it seems that it is interfering with the appearance of the model preview pop-up in the model tree. Try this test procedure:1- I close the preview in the open window for the umpteenth time.2- Until I see a model preview popup in the model tree, the preview in the open window does not appear again, if I display a preview popup in the tree, the preview reappears in the open window ... That's it, I have encountered this behavior in both Creo 2.0 M250 and Creo 8.0.0.0. Hope you fix it soon !!!Thanks
Add possibility to activate/deactivate upper-level cross-section when working with active part inside assembly.
When applying the topdown approach for machine design and their variations, it's often the case that it starts like this. A general skeleton is made Different datum features/coordinate systems are made to indicate the position of seperate modules. A Family table is made that has different values for the position of those modules (f.e. larger machines have some components further from eachother). If you were to rename a datum feature (point or csys) in the main skeleton and you want this name to be updated in the instances, a normal regenerate won't work, it has to be done by an edit definition. In order to avoid forgetting or overlooking some instances we'd like to see creo improved so the renamed features get their name updated by the regenerate action.
Hello,The addition of a config.pro option "Lock Scale" on Sketch > Modify Dimensions would be an important enhancement on display cross sections.Thank youRegardsLuis
I would like to see an option to remove a reference in the Edit References tool. Many times I make changes to a part model that removes references for a later feature that does not have a replacement. I would like to be able to use Edit References to replace and/or remove lost references without needing to edit definition.
In Creo Parametric, when creating the AR model, it would be useful to already see the 3D annotations (MDB)
Currently when using a Material Directory in Creo (tested in 4.0) if you have multiple sub-folders the search in the window does not search within the sub-folders. With many material files of differing types it's beneficial to use sub-folders. The search also appears to only search on the filename, which limits the search capability. It would be beneficial to allow searching on filename, name, description, and user defined attributes at a minimum.
With modelcheck, we can easily add parameters and relations to pass mass properties to Windchill. For instance PRT_PARAMETER MASS REAL PRT_PARAMETER MASS NONE EQ PDM PRT_RELATION MASS=PRO_MP_MASS The problem is that WindChill is being configured with units (as it should be). If a part does NOT have their relations set to be unit sensitive, the parameter generated will not have a unit. When you try to check-in this model, the Windchill page will have an error. If modelcheck can automatically update the relations to be unit sensitive, before it does any relation checks, adds relations or parameters, that would drastically help us with legacy models from the last 30 years. That would require a 'check' for modelupdate to make those changes. Which means, we would have a check to see if the unit sensitivity is On/Off. Or, we could get the same results if the below capabilities are added to Modelcheck Add parameters with units Check for parameters with incorrect units A
As part of contact QA, freebody force balances are required. For this x,y,z, contact measures are required. Automatic Magnitude is not sufficient. If there is only 1 contact then there is not much hardship other than human errors. If one models a spline connection, for example, then there may be 10's - 100's contacts and human error will occur when creating x,y,z measurements, it takes considerable time and models that have many contacts take a long time to re-run ... Could be switched via a config option or as a check box when creating the contact Contact force components could be stored in a separate csv rather than cluttering the summary file Have default recording in the WCS PLUS at least one other of the user's choice.
It has been possible to output fastener shear forces (WCS) for some time. But only those that know there's and environment variable can get this output. Please just do this automatically. Currently output to the .PAS file amongst all the other PAS info, a separate fasteners.csv for all fastener info would be good.
Plotting a quantity along a curve is useful. If this an open curve then it is clear that the 'highlighted point' is the origin of the abscissa - toggle as required. This is NOT clear if one plots a quantity around a hole. The start is also the end ... which way does the graph go? Clockwise? Anticlockwise? Is the 'highlighted point' the lefthand side or the righthand side of the graph? Either provide a message that tells the user how to work this out or better to avoid human error, provide an arrow - vis magenta direction arrow for beams - that can be toggled.
Graphs to show how the convergence of, for example, how residual contact norm is progressing are not useful. A contact residual norm begins at a value of 1 and (one hopes) reduces in a controlled monotonic fashion to about <1e-12. The graph Y-axis (residual norm) axes are 0-1. So after the first few iterations they are all just a flat line and effectively on the X-axis. A log scale would be more sensible. The graphs are also 'fickle'. Sometimes they work, sometimes they don't and there appears to be no way to modify their presentation.
Loads as functions of coordinates are not permitted if one wants to carry out a Large Deflection Analysis. The simplest example of this would be creating a 'hydrostatic' load in the inside of a thin walled fluid filled container. It is not possible to create a hydrostatic load without using function of coordinates and therefore immediately not possible to use LDA
The hydrostatic load case is very common. Currently only possible using function of coordinates and then limited to small deflections. Please introduce, specifically, a hydrostatic load that is compatible with both Large Deflection and Small Deflection Analyses
How does the point or hole edge or curve or surface or part etc move? We do it by post processing and look at EITHER x or y or z or magnitude. But if one wants to examine the movement of a hole, for example, with Z as it's axis and X,Y transverse we might want to see the VECTOR sum of X and Y. Currently one has to plot X around the hole and export as a graph then plot Y as a graph and then us a spreadsheet rather than very quickly identifying the maximum vector sum and its location. There should be no limit on which CSYS this can be done in.
Big structures, large assemblies for example, usually implies lots of elements even when sensible model 'efficienies' have been made. Then this means longer run times and more resources; particulalry if there are contacts. One may only be interested in a portion of the overall model and the method usually employed is to refine mesh in only that location but this is not always appropriate; particularly if there are many regions of interest. A better method would be to define the region(s) of interest as a 'submodel(s)' The 'unrefined' parent model provides the correct stiffenss and therefore force systems into regions of interest and therefore deflections of the regions' boundaries. Each region is then effectively opened and refined separately and run using an enforced displacement boundary. This is not new and other software permit this. Google 'submodelling'
this could be very handy in knowing when you saved/modified this rep. over a period of several months/years of development
There should be a way to control all of the settings in the picture below so that they don't need to be changed every time. With the new GPU rendering there is no reason not to turn up the quality levels. Also my personal box to stand on, CAD renders should NEVER default to jpgs. PNG with alpha transparency is far and wide a better format for shaded renders. I understand that I could create a mapkey to set all of these settings each time and I likely will, but it would be nice to just be able to control them like you can with the default scene config (default_scene_filename)
The way Creo deals with Appearances needs further improvements. One of them, is the parametric colors assignment based on feature selection or even parametric surface selection methods susch as seeds and boundary. Currently we can use selection intent, including seeds and boundary to assign colors to surfaces. But this is done in a one time way, not as a parametric association between input and output. Meaning, if we redefine some features and new geometry is created, the new surface geometry is assigned the default color appearance, forcing the user to have to repaint whatever surfaces his features generate. Then, there is the problem of inconsistencies. 2. Copy Geometry feature now allows the user to control the copying of appearances from source geometry, which is fine. But if we use "Merge/Inheritance" or "Cut", we cannot control the supression (or not) of the appearances, meaning, the source model always controls color appearence, and we cannot force new colors in an inh
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. We are part of the tool industry. I am a member of our design and construction. 2. What version of Creo Parametric are you currently running? Creo Parametric 7.0.1 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. currently only possible with simple geometriesNot stable with certain parameter combinations although all boundary conditions are metYou can see attached a model matrix (.xlsx) with unsuccesfull parameter combinations 4. What is the use case for your organization? We want to have realistic 3D CAD models of cutting tools for production-ready design and transfer of production-ready target data to subsequent processes such as test planning. Necessary would be 3D geometries as freeform rotation through an existing geometry as a subtraction t
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We develop an addin to Creo Parametric related to CFD domain. Our tool has a tool of creating custom images which is highly demaned by users.2. What version of Creo Parametric are you currently running?v3 and all the newer3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Our addin provides a tool of creating custom images, including orignal model plus additional graphics. We try to reproduce the whole picture in general as it a user sees it in Parametric's view window. In particular, we extract model tesselation and its visual properties, background colours and light sources. We use ProLightSourcesGet() function to enumerate light sources as in "Lights..." page of "Scene Editor" dialog. The issue is that ProLightInfo structure is missing a flag/field describing "Lock To" setting.4. What is
We are a value-added resellers of PTC Creo software and my role is an application engineer. Currently, I am using Creo 8.0 I am looking for warpage analysis in CMA but currently, it is not part of the Creo parametric software. See Article - CS302295 Warpage in plastic injection molding is when the intended shape of the molded part is distorted during the cooling process. Mold warping can cause the part to fold, bend, twist or bow. So the industries where the accuracy of the part is important but due to unavailability of this functionality make a buyer search for another solution If this is available or comes as a new feature then it would add value to the organization in terms of part-level aesthetic and assembly accuracy and save a lot of money.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.CTO/mechanical design engineer at small company doing industrial stuff. 2. What version of Creo Parametric are you currently running?83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.I have wished since 1999 to be able to work in a true spatial 3D environment.It is kind of sadly amusing that we create 3D models using a 2D environment and what is basically one fingertip. But today a nice VR headset is $1000, and any moderately sturdy CAD station has the capacity to drive it. My Valve Index even has "claws" - the handheld controllers detect finger movements individually. I should be able to hold my models in my lap, turn it around, pick and apply features onto them from a palette, adjusting dimensions, like "Here's a hole (drops it on a surface). A little wider (spreads thumb and in
Currently "template_solidpart" and "template_designasm" can only be set to a path of a .prt file.It does not seem to be possible to set it to none/empty, and force the user to select a template form the list. Use Case:We have divisions that use Metric and Imperial, and so have a start part for each. We don't want to specify one or the other as default as they may be used by accident. We don't want to have to manage 2x config.sup files either. We want the default to be none so the user has to make a conscious selection each time.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.