Recently active
Description: We Secude are Solutions partner for PTC creo developing data protection software. * Currently we maintain data for each workspace* During switching workspace in same session* we are unable to clear this workspace specific data We would need notification during workspace switch to clear workspace specific data. Reference: https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=15470733
Description: We Secude are Solutions partner for PTC creo developing data protection software. Currently we are interested in following events in an embedded browser to provide secure data handling. *Export *Save As *Rename *Import *Workspace selection Reference: https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=15296916
Hi, Pattern on Curve should be enhanced with the following capabilities: 1. Allowing 3d curve. today only 2d are permitted. 2. Allowing define, by dragger either "on entity selection", any point on the curve as starting point.
Hi, the option to merge 3d curve is missing. today there is a workaround for that (creating a surface using those curves and then selecting surface edge ), however, it is tedious and require well trained user. adding this capability will simplify user interaction, work speed and improve user satisfaction.
The color of unreferenced dimensions is bind to "Manufacturing volume". To highlight unreferenced 2d dimensions better, this value has to be changed. Unfortunately this affects 3D geometry. E.g. internal edges of quilts. The color for unreferenced dimensions should not be bind to manufacturing volume, but have it´s own setting.
STEP export process extract author on step file according to ISO 10303-21 standard, to be compliant to General data protection regulation (GDPR) standard we need an option to customize to set its value as anonymous. Thank you Example, on ligne 4, the FILE_NAME attribute has the "Author"ISO-10303-21;HEADER;FILE_DESCRIPTION((''),'2;1');FILE_NAME('TMPxxxxx','2020-08-24T11:48:24',('Author'),(''),'CREO PARAMETRIC BY PTC INC, 2019164','CREO PARAMETRIC BY PTC INC, 2019164','');FILE_SCHEMA(('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF { 1 0 10303 442 1 1 4 }'));ENDSEC;DATA;#26...
Hi, There some commands in which API not available which is performed using Mapkey. While recording mapkey and feature selected on Model tree, specfic node number is recorded for each selection. If there is an API to get this node number, then dynamically build the mapkey string and run on specific features. Comment your thoughts on this. Regards, Naveen
In EZtol option setting, software allow user to set a default tolerance value for the dimensions that are not link to 3D annotation. But in reality, the default tolerance value for dimensions should be different. The default tolerance of dimensions depends on the length of the dimension just like using a tolerance table. So it would be good to have a function to let user import a tolerance table in EZtol stack-up UI.
Customer reply they need a function to merge tolerance reports in EZtol. It will be very useful for customer to use concurrent way to create the tolerance report for a single design. Now If customer import a report to EZtol, the existing tolerance report will be replaced.
enable Lattice elements orientation to be created normal to defining surface not just based on axis direction. when creating a lattice element - for example cylinder. id like to replace all solids with same size lattice elements, today this cannot be achieved as elements are stretched or reoriented to fit the geometry on one hand and thedefing axis on other end.
We export FIF (.fif) files to send down to automated tube benders. Today, the creation of those files is done manually from an active Creo Parametric session. That creates some limitations and risks we'd like to avoid. This is a request to be able to use the Windchill Visualization Server (WVS) to publish FIF files from a Creo assembly in Windchill. Similar to using the WVS for STEP file creation. I realize that there are some non-trivial technical issues that will need to be addressed, but we think the value exists. This enhancement would free up our users for more important work, allow for more consistency (e.g., settings, file name convention, location of attached files), faster speed, etc. Thanks, Keith
We're defining a symbol as pictured below: Definition The resulting field does not wrap as desired. Result not wrapping
It will be better if we can control the dimension lines color and dimension text colors separate. Current version of Creo 7.0 and any other older version doesnt have the functionality of micro managing the text color for dimension and dimension lines. Also if we change text color from .dtl file it applies to all annotations including Notes, dimension texts and Tables. Creo should have this functionality to manage all the entities just like other CAD provides.
We have a part for a shipping envelope. Within the part, we made a simplified rep showing the envelope tab opened (it suppressed a few features). We also include a predefined flex that allows for the bag to 'stretch' based on dimensions of the content which is specified at the assembly level. An engineer wanted a drawing view of the envelope flexed (with items inside), but using the simplified rep of the part to show that the envelope shouldn't be sealed. When the user created a simplified rep in the assembly using the simp rep of the part, the flex was gone. Support says that flexibility is not supported for simplified reps! Please change this. The only other option is to use family tables, which is very much not popular in our organization. Thanks!
Please add support for optional parameters within ModelCheck: Example: we have parameters that aren't always required but if they exist in the models, then we want them designated to Windchill to be searchable, be a string, etc. Optional parameters should be listed in the start.mcs files or in external list file. Support for wildcards in optional parameter names - we have parameters like CH_MFG_1, CH_MFG_2, etc. where having ? (single) and * (multi) character wildcards would be helpful rather than having to list all of them.
I have a special counter bore for clearance with a socket wrench. Having typed it in, I changed from close fit to free fit and it changes the CB diameter back to the standard file definition. Please leave a typed in value the same. The same thing happens going from free fit to close fit. Manually entering the counterbore diameter: Changing to close fit: Manually reentering the counterbore diameter: Changing to free fit: Thanks.
When trying to open the main assembly of a project, sometimes it's difficult to track down the needed main assembly in the midst of a forest of assembly files. Especially when the assembly files were created by others and they use a differente naming convention. This feature is already implemented in Solidworks, I think. To avoid spending to much time browsing and opening assembly files, only to find out it's not actually the main assembly, Creo could save in each assembly a flag to indicate if it's a top level assembly or not. The procedure would be as this: when creating an assembly, set the flag as a top level assembly by default. Whenever an existing assembly is assembled into another assembly, automatically flag the assembled asembly as "Not Top Level Assembly". When browsing for assemblies, include a "check box" in the User Interface to filter down only "Top Level Assemblies". The only caveat I see with this suggestion is that the Assemblies whe
Creo Parametric. Change the hexagon sketch that is in the Sketcher mode, Palette. The current hexagon ridiculously has a dimension across one side of the hex. Silly. Instead, update the hexagon sketch to only have a dimension across the flats. This is universally the way all hardware and wrenches are referenced for hexagon shapes!!
ModelCHECK: In Continuation to Article - CS331008, this idea is to provide an option to add lower case words reported as NOTE_CASE error/warning to a ignore list file with one click in the MC report, similar to NOTE_SPELL where words can be added to dictionary from within the report, without having to manually write those words into the list externally.
Within the sweep feature if you click on create sketch section , the sketch view automatically rotates to the back side. Is it possible to change this so that you can choose the sketch view or just rotates to the front side?
To improve sketch usability when having to deal with multplie references, I suggest PTC to add two additional buttons in sketch mode. 1. Hide existing references 2. Show all references Hiding the existing references, would allow to easily deal with more complex sketches. Hiding the references, would not delete them (obviously), but would simply declutter the screen, and most importantly, let the solver ignore those references when snapping to references. After we use some references, snapping or constraining the geometry to it, the solver should have the option to ignore those references when sketching new geometry, or have a smaller data set of references to try to snap geometry to. This would also have the benefit of avoiding to acidently snapping to the wrong geometry, as shown in image 6 and 7.
Pattern Feature should also be made available in a sketcher mode. This will help users to easily create sketch and will save time to recreate pattern in 3D model.
It would be great if applied image on 3D model surface visible after check-in to windchill as well.. Currently applying image on 3D model surface can be done by two feature 1.) Image, 2.) Appearance, Though images added by these features will be disappear once the 3D model checked in to windchill
This is a product idea conversion of case 15531715. API extension required to create weld features.
This is a product idea conversion of case 15550744. API extension required to access position of model weld symbols on the drawing.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.