Recently active
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check that Model Name should be the same as File Name and Number (3 columns in WindChill). It would be even better if we can also deal with file extensions and non-compliant characters in Windchill. In other words. Filename="Name".PRT or "Name".ASM and vica versa. The name SCREW7.5IN would need to have a file name SCREW7_5IN, where the period gets converted to an underscore. Some way to have a rule that connects the three together, but allow for these exceptions.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea, we would like better Support for use-case scenarios where some instances of family tables are released and others still being worked on or tweaked from the generic's family table. How can we run modelcheck without flagging all instances as modified.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use, Allow an option for ModelUpdate or Custom Checks to go to the ALL section by default
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea Allow mapkeys to record actions made within the Modelcheck window (expand certain sections, take action on certain issues, etc.)
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea Allow the modelcheck condition file to incorporate more than 2 statements and include multiple AND/OR with parenthesis
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have ModelUpdate run on other modes besides Interactive
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check for Material Names that should NOT be using. There may be a legacy material that got used due to a save-as.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea we would like to Run modelcheck from Windchill via cadworker and view results within the browser.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea update modelcheck ASM_CREATE_VIEW with the ability to create ISO views - more complex views
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have Modelupdate EXTRA_LAYERS allow for a list of layers to be in the layer tree, without forcing its creation, such that everything else can be deleted
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea, please fix modelcheck. Right now PRT_PARAM_MAP won't actually map if PRT_PARAMETER is also available for the same parameter. This doesn't make any sense to me.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have modelcheck STD_DRW_DTL_FILE based on model units
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have Modelcheck OVERLAP_INFO - Support Geometry lines, not view border
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have Modelcheck UNUSED_SHEETS to support formats
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have modelcheck MCREGEN_VERIFY_FT_INSTS for parts as well
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have modelcheck DIR_REPORT to be a separate location than the actual HTML files for the ModelCheck browser. Any non-local path will fail and give an error when running modelcheck
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea move out as many config.init options to another location that can be modified while running Creo AND can be set with a condition.init
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea modelcheck MATERIAL_NAME support for subfolders in the material library.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have ModelUpdate reports to be added as an attachment to the CAD Document in WindChill automatically. Preferably, just the last one.
We are using the Automatic Rep since upgrading to Creo 5, particularly when PTC by default hides the pre-Creo 4.0 Geometry and Graphics simplified representation. We are experiencing that components in this Automatic Rep are not visible in the PVZ exported from Creo when the master rep is not in session. It is therefore not possible to open a model in a user defined representation and export to PVZ, when the user defined representation uses Automatic Reps. Consequently, when you open a model only in the Automatic representation available in Creo, not a single component contains any geometry in the PVZ. Again, only when the master rep is not in session. Using the option hide_pre_creo4_reps I could see that parts that where in e.g. geometry rep where actually exported to the PVZ, even if the master rep was not in session, so this effect is only seen on the Automatic rep. Shouldn't an export to PVZ at least use the geometry rep of every visible component in the assembly ?
Following the PTC support tutorial for Modify Size, it is possible to modify the size of a part and as expected, all instances of that same part follow that modification. This modification works for both parts that are reused in AFX or reused via (reference) patterns. This doesn't work for changing the type of a part. The tutorial for Modify Type shows the action for only one part. What we have found so far is that : The type of an AFX profile that is in a (reference) pattern can't be modified. The only workaround seems to be to delete the pattern, modify the type and then re-apply the pattern. Any possible consequence on e.g. simplified representations and drawings such as balloon references, partial view references make this method less than ideal. The type of an AFX profile component that is reused by sing the AFX user interface can be modified on a particular instance of that profile, but this modification will only be applied to that one instance, copied into a new comp
It would be a good thing to have a config option to set the regen type in NC manufacturing so that the session doesn't pause for a user input. This will allow a complete regeneration in Creo NC MFG in a automated NC program generation environment. I would like to set to "Normal" and skip the dialog.
Creo Parametric can export a 3D PDF from a 3D model (part or assembly), but only the default orientation views are available from within the PDF. Please also include any published, user-defined combined model views, along with their attached PMI annotations, so these can be used as part of a technical data package based on the 3D PDF.
In NX, while exporting a 3D PDF-based technical package, you can select from a set of loaded template files. The selection then controls various aspects of the exported 3D PDF, like orientation, scaling, title blocks and other static or dynamic annotations. With Creo there is only support for very basic recipe files that don't appear to handle things like standardized title blocks. Please add support for template files like NX has.
NX allows the use to attach cutting plane symbols to a section view, with various options like arrow direction, text orientation, etc. This helps the user and any reviewers to correlate PMI MetaData in PDM to the 3D geometry rendering, for downstream business process workflows. The attached example shows a cutting plane symbol attached to an offset section view. Please add Creo support for the equivalent capability.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.