Recently active
Issue:When mirroring a part that is dependent, the new model file does not have the MBD information taken from the original. The process of mirroring a part does not allow the user to specify a specific start part for MBD to use, it takes a default one from Creo. Issue description:• When creating a mirror of a part file, the users are not asked to select a specific start part to use. Steps to reproduce issue:• Create a mirrored part within Creo that has MBD information within it and see what actually comes over into the newly created mirror part file..Expected result:The user should be prompted the ability to select any specific start part to have the newly mirrored part created in.Creo could also automatically generate the newly mirrored part file with the same MBD start part used for the original part file.Reference data:• See the information provided in the case file number 15677433.
It would be convenient to be able to be able to reorder/rearrange the columns in the Open dialogue box. Typical behaviour in a Windows Open dialogue would allow me to drag and drop columns, however this isn't possible in Creo. E.g.
Is it possible to change the surface roughness of a 3D model for 3D printing? Building a prototype with 3D printing generates a model with smooth surfaces, while in reality, depending on the material, there are surfaces with different roughness.A prototype made in 3D printing with smooth surfaces, has different results compared to a prototype made in cast iron.This forces us to create a prototype with much higher costs than expected. Creo Parametric currently fails to do this.
Hi, Overlapping two (or more) model (part or assembly) simprep with option to add dimensions between them. The can choose the main simprep. Even if there is any workaround it should be in a dedicated tool. An example I did in solidworks.
Would be good if we can add our standard parameter to a multibody start part. then every time you create a body the parameters will be available in the body. not having to go through each body and adding them one at a time
It should be possible to move and rotate a set of parts and subassemblies even If they are fully constraint, for example by adding a move/rotate feature in the assemby, simular to the flexible move command for geometry in part mode in flex. modeling.The included parts are not sequential in the model tree. Also include the option to copy (instead of move) and Pattern the selected parts. The parts to be moved should be able to be selected by picking or by box-select and the move/copy/rotate should be able by dimension and with the from-to option.
Creo Parametric should be able to export URDF descriptions of mechanisms to allow easier construction of assemblies in external simulators. There exists free translators for other CAD packages (i.e. SolidWorks) but none currently for Creo, which is creating a disadvantage.
Description of Issue: I am trying to import a image in MBD model in one of the required combination state. After importing the image it is visible in all combination state. Need the image in only one required combination state. The image may contain the point chart table, the part table associated with the base model or it may be of any graph etc.As like Image if I need to import a Excel sheet consisting any tabular information of model or PDF which may contain any Tabular information of MBD model then we do not have any option to import in Creo 7.0. Requirement:Need an option that can manage the imported image, graph or any imported file in only one required combination state. This will help us to add any additional information to the MBD model in a required view or combination state.
An offer to the CREO developers to add a search function to the menu of playing the toolpath by NCL-file (Manufacturing). This function is very useful for postprocessor developers and search for specific strings of NCL-file in the play menu. + Ctrl+F
Flip multiple arrows is only available in the drawing. This function is also needed for model annotations. Here's a picture of the function for single use, when more than one dimension is selected in the model, the option is deactivated.
Creo7, when picking a feature on the screen (in part, or active part in assy), and multiple bodies, it only highlights the feature under 'bodies' in model tree. Number of bodies should not matter and feature should always highlight where it was created in the model tree, NOT only under 'bodies'. Have not checked other Creo releases, but believe it changed when the Kernel was updated to create bodies. This makes it very difficult to find where in tree that feature exists. Change software to always highlight feature in model tree where it was created and not just under bodies.
Enhance the measure tool: minimum and maximum distance in a specified direction. For example the minimum and maximum dimension between two eccentric circular surfaces or a set of surfaces. The user should be able to specify the direction of the measurement for instance by picking a line, a plane, axis, coord. system, default coord. system, delta x, delta y, delta z, or choose horizontal or vertical. NB: the ask functionality is different from the current projection option in the measure tool.
Hello everyone,If you like below thing that should be available in Creo Part modelling multibody THERE SHOULD BE A WAY TO GIVE BALLOONS FROM THE BOM IN DRAWINGYour reply is very valuable for me
Hi, when creating offset line, it is very common to have the possibility of patterning the offset lines either select many references at once. bellow you can see very common situation. adding this functionality will improve user interaction and save considerable time
The Compare Parts functionality in Creo Elements/Direct is very powerful. It quickly and acurately shows the differences between 2 parts in 2 adjacent viewports, helped by color coding. It's also easy to take measurements between the 2 parts. The Compare Part By Geometry in Creo Parametric is unreliable, slow, and hard to use. It would be great if the Compare-functionality of CED would by copied to Creo Parametric Thanks, Jaap
Hello,Activate permanently the 3D Dragger (Enable free positioning of the clipping plane) on cross-section and add it selection toolbar would be an important enhancement on cross sections usage. Thank youregardsLuis
Hello,A config.pro option plus in edit definition of cross-section to hide the outline of the hatch while activating one cross-sections would be an important enhancement on display cross sections. Thank youRegardsLuis
Hello,The support of Functional Mock-up Interface (FMI / FMU) standard in Creo Parametric Mechanism would allow to communicate with other simulations software and would be an important enhancement as a part of digital continuity.ThanksLuis
Afer activating simplify representation in model, name of this representation appears in graphics window. The same happens after actiating section, display style, layer state, explode state. Note in graphics window can become quite large. I would like to have possibility to turn off such note.
If a section is created for a model based definition model the section has to displayed as shown on the picture (acc. ISO 16792:2015 5.6). In order to fullfil the standard the designer has to manually create a sketch and a note. This should be automated by Creo. Benefit: User saves time. Display acc. to ISO standard. Example:
Hi, as of today while you import step/x_t file to creo you have two options: 1. Use Templates. in this case should the template contain density Creo ignore density coming from step/x_t file and therefor mass calculation is wrong. 2. Don't use templates. in this case Creo populate the density coming from step/x_t to file and mass calculation is correct. having the ability to decide whether to keep density coming from imported file, using import profile/config/interactive user selection, will reduce errors and simplify data exchange process.
Very often driving dimensions are converted on drawing level to ordinate dimensions. However, when converting linear driving dimensions in 2D, the disappear in the 3D model (because it is not possible to show driving ordinate dimensions in 3D - See CS212797 (See also previous product idea relating to this limitation) These dimensions are very important as they can be used for other downstream activities. For example performing a Tolerance stackup analysis. Very often they have to be recreated (driven dimensions) which is a time consuming and error prone process. See Video illustrating the problem. (function() { var wrapper = document.getElementById('lia-vid-6250648937001w960h540r161'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttri
In half views, the symmetry line is set in front by default. If the part is not rotationally symmetrical (which, strictly speaking, is the case for most of our parts and assemblies), the line of symmetry must be deselected in the view on the drawing and a centerline displayed instead.This cannot be displayed in the halfview. Current workaround: 1. Switch the half view to full view. 2. Show the axis (which is on the symmetry line) 3. Switch view to half view again. Wanted: Additional option in the half view settings for centerline.
1. Describe the ProblemCan't dual dimension individually.2. Are you using a workaround?Yes, by adding text to dimension to represent the secondary dimension.3. What is the use case for your organization?It would allow a dimension to be dual dimensioned individually instead of globally4. What impact does this problem currently have on your organization?It affects all of our Design Engineers within Carrier that need to add dual dimensions to individual dimensions.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 10.0.0.22. What is the problem?Creo does not allow to create more than one sheetmetal body within a single part3. Are you using a workaround? If yes, please describe it.I create only one SheetMetal body and the remaining Bodies as regular solid but it is not an acceptable workaround4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.It's useful for our company to have the ability to create a multibody part with more than one sheetmetal body; for eg. two bodies with formed features (such as louvers or gussets) welded together.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Great time saving.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.