Recently active
I am quite certain that this will have been fixed in Creo 2.0, but here goes anyway:When I am creating a feature, I frequently wish to use a datum plane, sketch, or some other feature as a reference. If I have not planned ahead adequately, and the required reference happens to be hidden, I am unable to RMB, Unhide in order to select it.Surely, RMB, Unhide/Hide should be available to pick at any point, whatever else I may be doing?WF2, M220Idea: Make RMB, Unhide/Hide available to pick at any point, whatever else I may be doing
in the 3D viewer (>18.0) the browserbar needs to be activated every time the program starts-up. I think that once this setting is selected, it should be persitent. this was the case in earlier versions of the viewer.even after some research in my %appdata% i found a setting in the file sd_fluentui_layout.def which I thought would do the trick, but it seems to be overruled elsewhere. even though the same setting does change the lay-out in version 17.0 of the viewer.Anyone an idea
Since Creo 2.0 doesn't support quasi-isotropic materials as MDF (Medium-density fibreboard), frecuently used for furnitures manufacturing, I propose the posibility to add this option for simulating these kind of materials that are not entirely isotropic and has uncommon properties that actually can't be assigned to any model.
Just like every other 3D CAD package that's out there, the Mechanism "add-on" should be included with the basic Pro/E package. It's a little frustrating to not have this ability when you just want to check for clearances on a hinged door. Although, there are workarounds that are a PITA to do, any Pro/E user should not have to do this and they shouldn't have to pay extra to have this capability. I understand why FEA, Piping & Cabling, and other add-ons must be paid for separately since these are more application specific, but for 3D modeling, the Mechanism capabilities should be open for all users without an added fee. Maybe this has been addressed in the latest CREO 2.0, if so, sorry for my rant. I'm using WF 4.0 and Mechanism is currently an "add-on" for those that shell out the extra cash. Please take this into consideration for future Pro/E releases.Thank You,Sam Lamb
Hello, I'm not sure if this has been brought up before but I think there should be a way to bring up "project specific" search path files. For instance, if I open up a project and I only need to search in a couple different file locations, I should be able to have an option to specify a search path file within the project's directory. This way, even if it's been years since I've opened up a project and I've deleted/moved associated files around to different folders, I can select the search path and allow Pro/e to find only the specific files I need (as long as those have not been moved, if they have, at least I'd have an idea as to what parts I was pulling in). This would also be helpful when sharing a project with other users on a network. Another advantage to this is that Pro/e would be less likely to open the wrong files that have the same filenames (this happens to me all the time because of .STEP files that have default partnames like "part001". I bel
Is it possible to check the stress distribution of all inner surface in analysis result at same time?Current condition:Use #Cutting/Capping Surfs to cut the model, and only can observe a part inner surface of this modelIt is only can create one cutting surface, can not observe the stress distribution on multi directions at same timeIdea:Add an option that can select some surfaces to show the stress distribution.It allow to create more cutting surfaces in one result window.
In the ribbon UI some commands are grouped in a "split button". From the help: "A split button keeps the information of the last called dialog from the ribbon button menu and calls it's action when the user presses on the left side of the icon. Pressing on the right side (the arrow) opens the ribbon button menu.". In e.g. the measuring group, our users very often use the measure "distance surf to surf" command.During the session the last used command is remembered, but in a new session it is lost. I think the last used command should be persistent.
In Modeling the Page Up/Down keys recall values in the User Input Line without clicking in the lineIn Annotation first the User Input Line has to be clicked before using the Page Up/Down keys workThis should be consistent. The behaviour in Annotation should be the same as in Modeling.
Der Verbesserungsvorschlag bezieht sich auf den Call: C11089322Kurze Erläuterung:Der Befehl zur Schnitterzeugung wird über die Minitoolbar aufgerufen.Der Dialog erscheint nicht. okWenn man einer der Optionen Ausgerichtet, Richtungswechsel oder Richtung umkehren benötigt, ist man gezwungen den Dialog aufzurufen.Denn diese Optionen fehlen im Optionenmenue, welches über die rechte Maustaste aufgerufen werden kann.Da die meisten Anwender das CAD-Programm mit einer Spacemouse und normalen Maus bedienen, müssen Sie mit einer Hand das Eingabegeraet verlassen. Der Arbeitsfluß wird gehindert.
It is not possible to change the detail boundery if the parent view is not on the same page.We have to move the detail view on the same page as the parent view. That needs to much time.best regardsKonrad BräumannCAD-Administrator
I wish to appear components only in level 3 & 4 in BOM Table.Accordingly i have filtered the repeat region with &rpt.level=3,4.It worked. but the similar components at level 3 & 4 belonging to different sub-assemblies do not get combined in the quantities.Refer the following snap for more details.(WF4 M220)
In the past we would just create a layer (we could name it GEOTOL for example) and add datums and notes associated with geometric tolerances.We could then (in the previous releases of ProE) hide or show this layer conveniently and add items as needed.This was always the best way to manage the display of datums or notes assigned to geometric tolerances.For some reason this functionality has been removed from creo. We are now asked to create a combined representation. This functionality should be returned in the next build.
We are constantly playing catch-up with adding new people and then getting new licenses to support our growth.Please implement a licensing scheme that supports on-demand licenses for all software and modules so that when customers need them they are available, and when they're not being used, customers are not charged for them.
Currently it takes us a week to get license packs that work: Day 1: Submit a new license request. Day 2: Receive license pack that doesn't work for older versions of modules such as Schematics. Create PTC ticket. Day 3: Get a response that we need to manually copy and paste parts of the old license into the new license pack. Send a response saying this is ridiculous and that they need to generate license packs that work. Day 4: No response. Escalate ticket. Day 5: Receive a license pack that works. This happens everytime we request licenses. It would be nice to be able to custom configure the pack up front selecting each module and the version. Or better yet, since PTC already has this information, just generate the correct one to begin with.
When I switch between Modes (Assembly, Part, Drawing, etc.), a different set of icons is displayed for each mode. Quite right too! However, many of these icons are common to all Modes - Datum Planes on/off, for example. What causes me some concern is that the common icons do not appear in the same place in all the Modes. For example, in my incompetence/impatience, I will frequently switch from a Part window to the Assembly it is used in and only then remember that I have all the Datum Planes Shown. this makes the Assembly slow to appear and difficult to work with. I therefore do a 'Panic Press' of the Datum Planes display icon, only to find that, as part of the Mode change, the icons have shifted; when my Assembly appears, it not only has all the Datum Planes Shown, it also has all the Datum Axes Shown. All the icons moved one step to the left during the Mode change. The other common problem is with the 'Switch Dims' icon. I use this quite a lot in all 3 Modes (that reminds me of the B
Currently when you measure the distance in a direction, the absolute value of the distance is returned. I would like to see the value be signed, so if the second point is in the direction specified from the first point, the value will be positive. And if the second point is in the opposite direction from the first point, then the value will be negative.
Currently, setting INTF_OUT_LAYER to PART_LAYER creates sub-layers for each part's linestyles. This allows for easy parsing of geometry in AutoCAD once exported. It will currently not auto-layer any phantom tangency lines, or datumcurves that are not the default linestyle. Adding this functionality would allow for much easier automation of 2D CNC file creation, and general output to 2D CAD.
We do not have excel for all the systems so it would be good to make family table edit in other spreadsheet programs like open office etc.
With the annotation command "Part/Workplane Geometry Styles" (part_layout_geo_styles) you can only select parts or workplanes. If you want to change the color of a sub assembly you have to select all parts recursively in this sub assembly. The command shows a very bad performance when it has to handle thousands of parts.When a part is added to this sub assembly after this you have to apply the command to the new parts again.The command should be improved so that it can handle assemblies in a performant way. Also added parts should show up with the correct modified sub assembly linetypes/colors automatically.
I don't like shortcuts that add extra steps.In sketch you have to area select a couple lines in order to place a fillet. The size will be an approximation from where the selections were made.From what I see in my beginning understanding of Creo this requires you to nail down dimensional constraints prior to changing the radii to the needed size as creo will remove previous constraints while placing the radii. If you should change the radii prior to adding back contraints the radii placement will distort.It would be far easier to specify the needed radii size ahead of time as you wouldn't have to re-enter placement constraints. Screen selecting the initial placement doesn't save you any time in any case as you need to change to the correct size anyhow.
Currently, to select model annotations with the Show Model Annotations tool, separate entities need to be selected or unselected to be shown or removed from the list.Please allow the use of a selection window (i.e. drawing a box around) for annotations, so users can selelect all within a specific area of the screen.
In a detail drawing you can select Quick Export (*.pdf) to quickly output this required format.Can the ability to change the Quick Export function to another format be introduced, ie to DXF
Currently in Creo/ProE Toolkit we have model modification Pre/Post event notification such as PRO_FEATURE_CREATE_PRE and PRO_FEATURE_CREATE_POST etc. That's good for Creo Toolkit based application to implement specific tasks respectively in Pre/Post function callback. However in some cases if we set a status in Pre function callback and then reset the original status in the post funcation callback and if user select cancel in model modification dialig then the post function callback will never get called. In this case expose model modification cancel event notification such as PRO_FEATURE_CREATE_CANCEL will be very helpful.If it goes further to provide an API to check whether Creo is currently in model edit (creation/modification) or waiting for user action that will be great.
When you set up a multi-tip tool, you can specify up to 8 tips, or stages. As workaround, you can define two similar tools with the same tool_ID and different Tool_Position or with two different tool_ID and the same Tool_Position (because two tools cannot have the same Tool_ID and the same Tool_Position).There is sometimes need to simulate tools with up to 16-32 tips... therefore, why there is artificial limit?
Into an assembly is possible to add components in simplified representation. So, is possibe to manage into an assembly the same component many times but in different representation. If exist a parameter with simp rep information (simplified representation name) will possible to share the different components in a BOM.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.