Recently active
allow hidden lines for cosmetic threads
allow to define tolerences already in sketcher
The drop down for offset, parallel, through etc. is not obvious, especially for new users. See poll:http://communities.ptc.com/polls/1322?pollSuccess=true
for turned parts, a partial view indicating the axis of rotation would be useful. So far you can specify only a deep. This is unhelpful for turned parts.
PTC Case CS73839 "Is it possible to export containers to STEP by Creo Elements/Direct Modeling"I don´t agree with statement in this case.By exporting containers as assembly, however it would be possible to export them in step format.In Modeling, many export formats have the possibility to export containers although other 3D CAD systems don't offer this structure. e.g. SAT, Parasolid, Creo Parametric, Granite, 3D-PDF, ...)
In FluentU / I and Win9xU / I, command buttons to work with a green check icon is different.I want to unify this.
In the current functionality, you are able to attach custom attributes to the 3D Model, which are automatically transferred to the related EPM document in Windchill.The 2D Annotation drawing, is also saved to a seperate EPM Document.The functionality to transfer an attribute to the Annotation document is missing. So you cannot attach e.g. "Frame Size" or "Scale" or "Drawing Type" attribute to the Annotation drawing, so these attributes cannot be passed to the related EPM Document.Some customers often use this kind of attributes to supply a frame size (necessary for output reasons), or a drawing type ("laser", "folding", ...).Wim.
The defaulty copy / paste function is limited while copy / paste special advanced reference configuration is verypowerful. I'd like to make the latter the default paste, the default paste special or at least have configuration options to allow the user to set the default choices when doing a paste special.
When selecting edges to display stresses in a graph, it takes a long time to select all the edges.It would be very helpfull if one could use the selection tools that is available in Creo Parametric in Creo Simulate as well.ex select first edge, shift key, select the last edge.or if one could use the copy and past funciton to select multiple edge and copy it into a feature, and then select the pasted feature of curves and select on it once to select the entire chain.Currently you have to select the entities one by one for every graph you want to show in the results.
When viewing ecad schematic and board documents of the same design, in Creo View 2.0, the PCB attributes shows a long list that do not match between the schematic and the board. Some of the attritude are attributed used only inside the board or schematic and not by Creo View and have different names. I suggest some kind of a method to control if they are displayed in the viewer. There should be a way to rename so that when user see Part Number (our convention) and not Name. See other issues in my case ticket 11221177.
When the profile in a workplane is covering an opening in a part, the 3D geometry in that section cannot be selected to point at (for instance for the Pull linear command). The 'Pull' can only be applied by choosing a distance or when a clipping plane is present in the part.
In Proe2001 it was possible if you do an external copy or a merge from another part, that you can handle the layertree for the component in the seperate window. Now if it is done in WF4 or Creo2.0 it is not possible to switch on the layertree from the menu in the separated window which is opened, because the menu point is missing.you have to stop here. Switch to the part, that is copied, manage the layers and then you can go on with merging.The menu butten layers should be implemented again in the seperated opened window.
Mapkey causes unwanted ribbon jumpWe recorded a mapkey with the refit command. Since we are using Creo, this mapkey is rather useless, because it causes more clicks than it saves. If I run this mapkey the active ribbon suddenly jumps to the "view" ribbon.As described in Document - CS55084 it is described that this is the standard behaviour of Creo mapkeys in general. However it is still a very annoying behaviour! Creo works different, when I am clicking to the same command button in the quickstart-toolbar or the view-toolbar. So I really can't understand why the behaviour should be different just because it's a mapkey.Even for mapkeys with different commands - in my opinion a mapkey should not change the active ribbon as I want a mapkeys to get a quick access to any command without changeing the active GUI-environment.
In Documentation, dimension feature projected reference point would be useful.
Modify section line, Modify segments is greyed out. Only when dependent detail view is deleted the segments can be modified!As long as there is a dependent view the modification of segments of a section line is not possible! Only the whole section line can be moved.Is there a way to keep the dependent view and modify the seperate segments?
When creating datum axis, datum planes or co-ordinate systems have the capability to create multiple ones at same time like when creating datum points.
When using combined views State in 3D:You can displayed combined view at the bottom of the graphic interface.It allows to navigue beetween Combined State Easily.Theses views are not update automatically if you change geometry of your model.Also you can save your model with not updated combined view.The only way is to clic or redefine each combined States View in order to force Creo 2.0 to recalculate pictures displayed.Add an option to Creo or change the default comportement in order to get updated View in Graphic interface.
if you try to annotate a chamfer that has been placed on a conical part you get an error: "The selected element cannot be used to create a dimension of the current type [Chamfer-Dim]. Please select again." so i tried using the default linear annotation commands, but the outcome is not as desired.
In the previous version (17) mouse wheel zoom was much more sensitive than the actual in the 18 version. I would like the configurability or the same behaviour of the old version. Case 11301086 failed.
To open a Mold asm only in ASM mode (without using a Mold License) is only possiblewith a special config.pro option (allow_asm_in_assem_mode). If this option is set to yes,a new method to open files appears in the file open dialog (Open in Assembly mode). It would be easier without an extra menue entry in the dialog if creo recognises that there is no Mold License and automatically opens the asm in asm mode instead showing an error only.
I entered this idea in 2012 in the Creo Elements/Direct Express, but I received no responses from PTC, so I thought I would give it a try here. Although I submitted the idea in the Creo Elements/Direct Express community, it actually applies to all PTC CAD applications. The aerospace company I work for already uses some PTC products. From September 2012:"I am working on a system, for the company that I work for, that will be storing and managing assembly and detail files all as individual STEP files. The system will then be able to download all individual STEP files for all assembly components (detail parts and sub-assemblies) for any specific assembly number. We need an application that is able to open an entire assembly as a batch process by loading the STEP file for the top assembly, and then continues loading all components from the other STEP files in the same folder. I have done this with Catia V5, but we would need a less expensive application for do
Ofthere there is a need to have form elements in both sides of a part in the same composition but just mirrored.so it would be nice to have a function that can mirror a list of form elements
Our customers use the command EDIT_DIM_TOLERANCE to modify limit tolerances by typing in a string for the upper tolerance and a lower tolerance which replaces the dimension tolerance value on the drawing. Alternately they type an upper or lower value which adjusts the tolerance on the drawing. This command is not available in the ribbon interface and should be. Preferably it should be incorporated within the Modify tab -> Annotate Group -> EDIT under the section for Tolerances in the Text Extension.
The scale labels in views should be arranged according to iso128-30
When selecting parts by viewport box for positioning, if an entire assembly is selected, it is not reallyselected but are selected the parts inside of it.Will be helpful an advanced selection like in move faces command also for positioning command.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.