Recently active
Ability to support double loops (donut-shaped geometry) in ECAD and OTHER_OUTLINE regions for both IDF and IDX, which is available in CATIA today.
Ability to display IDF-imported 3D volumes in GREEN for the board, and in specific colors for keep-ins and keep-outs with height (LIGHT BLUE for keep-ins and BROWN for keep-outs, for example) with transluscence (50%) This should also be possible when creating keep-ins/outs with height in ECAD region.Even better if default values for the color and translucency can be modified.
add confin option of switch icon
弊社の部門では、Creo Elements/Direct Drafting 18.1 のライセンスを仮想サーバで稼動できないので、現状、未インストール状態で、業務に重大な支障が発生しております。今後、早急に、仮想サーバでCreo Elements/Direct Draftingライセンスが稼動できるように、改善をお願い致します。いつ頃可能となるかのアナウンスも、早々によろしくお願いします。
The data structure "Pro2dEllipsedef" returned by the method ProSectionEntityGet (ProSection, ent_id, Pro2dEntdef) does not contain ellipse X axis orientation information. Currently this structure only provides location, x_radius and y_radius. This causes a data loss in case of inclined ellipses, when a ProToolkit application fetches the data from Creo Sketch object.
In case of a drawing is created using a drawing template, I would like to create a drawing file after specifying a simple display state.
There is no function to bent again for the block unit which was bent once. For example, Paper folded in the half can not be bent in a half.
When reading point coordinate data collectively, I want to also read a point name simultaneously.
A possibility to enable or disable the creating of centerlines, like in the standard views
Many users are using two monitors during design. While working on two different models with two monitors, users want to pass directly between two monitors/models to work faster so users need automatic activation between the monitors/models.
Ability to display Measurement window closer to the measurement location or at a specified location in order to set up options while minimizing mouse travel. Or, any other ways to set up options close to the measurement location.
Ability to cut links before projecting sketcher elements by for example clicking on a button or putting a checkmark in a checkbox. Cumbersome to cut references after projection.
Progress message is too small, and sometimes miss errors. Want the ability to display critical errors, for example, in a separate window in the middle of the screen. Or, change the background color to RED for critical errors. Anything that makes critical errors clearly visible to the user would be helpful.
When sorting a table with repeat regions, wildcard (*) is usable, but not the question mark (?) to apply a filter to the table. Want to user (?) to replace a character.
to change Cosmetic Sketch and Sketch mutually.
to choose whether the restraint of the element by Sketcher is attached or not.
distinguish the element currently restrained and the element which is not restrained in Sketcher. For example, by using colors.
In part properties it is possible to ask the statistics of the part. For instance weight and volume. The tolerance therefor is by default set to Rough. This is too coarse and can lead to costfull errors. it should be possible to set a default value (eg. 1%). Preferably this is a setting that can be stored in the site or corp customization directorie.
I have a drawing of an assy and this assy contains subassys. The subassys contain parts, shared in one or more other subassys. When I create a BOM table in Annotation, it will now count all instances of the shared part, ignoring the assy-structure. I would like to have the option to count them per level (per subassy).
When a part is active in an assembly, you cannot create a x-section. If we could create a x-section in an acitve part in an assembly, it would help us to be able to see what is happening inside the assembly while the section is active.
Currently, to enable logging for troubleshooting of Pro/E issues requires multiple environment settings, config.pro settings, modifying the startup file, etc. This should be a simple switch in Pro/E: enable logging yes/no.To make matters worse, there is a known issue with logging that makes Pro/E more prone to crashes.PTC, develop an easier and more robust logging process to help troubleshoot Pro/E issues.
When replacing a model in a drawing, the pop up box does not comes up with the existing model in the box, but with the words the generic. This should be replace with the actual model name you are replacing instead of "the generic". This would allow double clicking on the box to high-light the whole cell.An alternative would be to put and underscore between "the" and "generic" so that it would read "the_generic". Again so that by double clicking on the cell the whole cell would be highlighted and not just one word or the other. Which mean that you then have to drag the cell to type in the value.This is how it currently shows up.This is how it currently looks when you double click on the right hand portion of the cell.This is how I am proposing that it show up.
Currently, if you make changes in a family table, upon click ok, if any of the instances are read only, all of your changes are lost.PTC, please allow unlock as well as checkout from within the family table dialog box.
Suggestion from a member of our userbase:I should be able to select a thru hole, click a "same as" button and select a countersunk threaded depth hole and make the thru hole change all characteristics to match the threaded hole without having to manually change them individually. EVERY type of operation - holes, extrusions, round, chamfer, etc - should be able to be changed instantly to be the "same as" another of the same operation type. A simple check box would determine whether the dimensions are all related or remain unrelated. The "equals" function would allow the individual variables to be related. The use of equations to relate such items is too cumbersome and unclear to future editors of the model.
Make Display Combined Views visible and useable while working in the Style Feature and other tools. As it is now, Display Combined Views are not available when working in Style and many many tools. There is no reason to hide them at any time. If they are hidden while building or editing a feature, what is the use????
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.