Recently active
Dimensioning takes about 50% of the time for a drawing.There lies a great potential for improvement. The commands for Tangent Dimension DA_DIM_TAN in Drafting and am_create_dim_tang in Annotation are a big improvement.Previously you had to split the arcs at the right place before you could dimension them.If the command is active it is necessary to make three entries.First element, the second element and position of the dimension number. The chain dimensioning saves lots of clicks because you just have to select only the next element and the dimension number is automatically positioned.If the chain dimension would also recognize fillets, arcs, circles, it would be a great simplification of the dimension process. Die Kettenbemassung sollte auch Abrundungen, Bögen und Kreise erkennen und diese tangent bemassen. Das Bemassen nimmt ungefähr 50% der Zeit für eine Zeichnung ein.Da steckt ein grosses Verbesserungspotential. Die Befehle für Tangent bema
Changing the display setting of "Clash Color" does not change immediately.To enable, required a restart of the Modeling It is inconvenient.
All tools that require the sketcher should zoom in on the centerpoint being used to complete the feature.An example would be when making a sweep surface. After choosing the trajectory, and entering the sketcher to build the sweep section, the center of the sketcher is in some unknown place. Sometimes the model is not even visible. This requires panning and zooming to find the centerlines and centerpoint. If the centerpoint was automatically centered on the screen it would save a great deal of time. Oddly, sometimes when editing the sketch the centerpoint is automatically centered onscreen.
If a drg is reserved in Drg Manager, nobody can modify that drg. However, other users can modify the BoM of the assy. I would like a method to reserve Masterdata or even better identify any related Masterdata that the user may wish to reserve when reserving the Doc record.
If we want all surfaces of part, we can select diect_surface or surface_set.But Creo Parametric can't use rectangle selection for surface,Creo Direct can use it !So I wish that Creo Parametric also can use it.I think that it must help many users.
In some cases a BOM is paginate and spread across 2 sheets, or even completely placed on a seperate sheet - In such cases it is not possible to make use of the BOM/Balloon selection highlighting to enable quick identification of parts/sub-assemblies within the drawing interface.I would be useful if the current selection highlighting capability for BOM/Baloons could be ehanced to allow for this.
Keep all dialogue boxes in the foreground. As it is now, there are a number of dialogue boxes that can move behind the work area and become lost. This usually happens when a second work area is inadvertently selected. A dual monitor setup compounds the problem.
I would like to see the ability to add a third csink to the top of the cbore.
The ability to set the text high of a parallel radial dimensionThis would be useful in a case where there are numerous radial dimensions that need to be indicated on one view. If the text can be set to be closer to the dimension line, it would be possible to decrease the size of the view dimension or decrease dimension clutter
The ability to apply polar dimensions. Similar to ordinate dimensions, but around an axis.This is useful when you need to dimensions circular view angles where normal dimensioning schemes clutter the screen.Currently if this is desired, the customer sketches the dim lines, add notes for the angles and relates these to the viewBelow is an examples of what is desired
When you generate the TrueType PDF, the Polish special characters are not supported. Environment = german or english.Font Support "Arial.ttf" polish special character as PDF-TrueType Export (like Univers OTS.ttf - Works!)for Creo Elements/Pro 5.0 and Creo Parametrics 2.0 (Testet with Microsoft Aril.ttf Font) Respect to: C11339659, E7723543 and SPR 1900989
It would be useful if there was a button, like there currently is in the flat state preview, to allow automatic flat state creation by means of a simplified representation. A lot of times people encounter problems with using family tables when it comes to saving copies of data or when working with Windchill, and therefore resort to the Simplified Rep method.Currently a mapkey is written and icon created in the UI to make this process as seembless as possible, but some users do not have the knowledge to do this and it would be convenient if there was such a button. Perhaps even have a config.pro setting allowing you to determine the type of method applicable to the flat state preview flat state button. In other words, having the ability to set the flat state preview flat state button to use either family tables or simplified reps to create flat state
ビューマネージャーの中の簡略表示や方向を複数設定したあと、“すべて”で 簡略表示と方向の組合せを何パターンか設定したいが、例えばEXCELなどを 使って、前述した組合せの作業を簡素化したい
There is an autobackup option in Elements\Direct Drafting (System - Save - Auto Save Drawing). This can be configured to save a "autobackup.mi" file, preiodically at a pre-determined time. Can this functionality be enhanced to store more than one file?For example if the backup is set to store avery 10 mins an "autobackup.mi" file is created every 10 minutes, overwriting the previous "autobackup.mi". I would like this enhanced, so the user can decide how many "autobackup.mi" files you would like with the oldest being overwritten with the newest. i.e. Save every 10 minutes using 3 files. In this case, you would have 3 backup files spanning a 30 minute window:"autobackup_1.mi" - 09:00"autobackup_2.mi" - 09:10"autobackup_3.mi" - 09:20The next save would overwrite the 09:00 file:-"autobackup_2.mi" - 09:10"autobackup_3.mi" - 09:20"autobackup_1.mi" - 09:30This gives the user much more security when working in Drafting.
Beim import von DWG Dateien mitder Option PAPERSPACE ON soll die Bemassung als Bemassung erhalten bleiben.
Erweitern von SheetMetal-Shop-File um jeweils einen Zusatzschalter. Dies um die Flattexte für Punch und Stamp auszuschalten. Beispiel: (sha_set_flat_show_punch_text nil) ;; ein- oder ausschalten von Text bei punch(sha_set_flat_show_stamp_text nil) ;; ein- oder ausschalten von Text bei stampDanke im voraus.Urs Ammann
When creating a new view under Orient / Orient By Reference the original setup is lost when redefining it. This even occurs when it is originally set up if Reference 1 and 2 are switched. It would be useful to change Reference 1 and 2 without having either or both lose their selection.It would also be helpful to have a separate control in the Orient By Reference setup to define the views zoom level and position. As it is, all view pan and zoom setup is lost when redefining. Although some of this is covered in Dynamic Orient, the Dynamic Orientation controls are not connected to the Orient By Reference controls and so if the user wants to use both, it is not possible because all references are lost when changing to the other orient setup.It is a real problem when the orient by reference information is lost because the data will not update if the defining references are changed.
On the PTC Community Site, if you are trying to retreive something that was discussed months/years ago, and you don't know quite what the key words were, you can go you Your Stuff drop down and review you posts and comments. The problem is that when you have participated a lot, your history file maybe many pages long. A lot of times, the have the option on these types of pages of click on the number (which then shows other numbers), you also have a Previous button and a Next button. Since this discussion was shortly after I started commenting on the community site, I know it is in my early history.Could you add a Last button and then I could search forward from there? (The picture below is from the bottom of my first page.)Thanks, Dale
want to complete off-set as edge by taking round out when off-setting solid or quilt and if round smaller than off-set value exists.
Pro/E should be able to check parts that clearance is between specifed numbers, such as between 0 to 0.10mm clearance is included in the result today, but should be excluded. Very difficult to understand the result.
There should be a window that displaying hided components
Output result of interference check in detail between selectable structure components in a new window
DXF import performance is extremely poorTransfer of conductive pattern information is a must. An option to shrink the data size would be very useful.
DXF import performance is extremely poorTransfer of silkscreen print graphics information from ECAD to MCAD is a must. An option to shrink the data size would be very useful.
3D annotations & dimensions must be transferred bi-directionally (MCAD <-> ECAD). This is a must for improved efficiency.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.