Recently active
I want to adjust boundary condition of surface at the both ends of the edge.Commando : Boundary surface - Constraint - Drag handle
Yet another obvious head-scrather that makes no sense. Right now you can only add hotkeys for functions that are single lower-case letters, with the exceptions of function keys. Is there a reason at all that we cannot use a combination of modifier and letter keys, including upper case? Once again, you can do this in other CAD systems, but are really limited with single hotkeys in ProE.
Ok, this one is just as bewildering as a 100 other thing I keep running into - I have 3 images I setup as front, side, and top view for the object i'm working on. Why do we not have the simple ability to add any image to a layer, to be able to instantly hide or unhide it? Why have obscure separate hide/unhide controls in your view tab? It's obvious that images should be able to be added to any layer just like other entities.
Tthe layer tree - wow - why in the world you guys not have a separate tree window, vertical or horizontal, for layers? Why does it have to be selected as a tree mode, why can't the modeling tree and the layer tree be shown side-by-side, easily accessible at the same time?
Yes, just like the title - why can't we just turn the grid on and off with a hotkey, like in Alias Surface? Not only is this useful for modeling, its also extremely useful to get a sense of orientation when manipulating your perspective vew.
Every other CAD package I've ever worked in or seen, lets you work like a human, not a robot, looking at a perspective view adjusted for natural perspective, allowing you to judge your design constantly and consistently, like you would if you were holding a real object in your hand. Your forcing a CAD modeler to create features and styling in an isometric view at all times ls like forcing us to drive a steam locomotive down a highway. Solidworks has figured out a way to model in a perspetive view, not isometric - any reason you cannot fix that please? Thank you, GI
One of 1000000000000 frustrating things I keep running into, as a new PRO-e user, coming from Autodesk Alias, that makes positively no sense and should be in "least you could do" category when it comes to world-class CAD software costing thousands of dollars. I'm just trying to position an imported part on a corrdinate system. Not assemblying, just incorporating an imported part into my current one. For one, a coordinate system does not provide easy move/rotate controls that should be obvious; you have do dial the numbers in while in edit definition mode. And on top of that, while I'm manipulating the coordinate system, the part that was placed on it disappears. I found no way for it to be shown during manipulation. Please fix that, thank you.
Activating and deactivating differnet license types in Creo Parametric with a Modules Menu (like Creo Elements Direct)Actual method in Creo Parametric:Metho in Creo Elements Direct:
test
We find it strange that when assembling a part or assembly into an assembly Creo chooses Normal as "firsdt choice" assembly constraint. In Wildfire "first choice" was Mate/Align, Offset/Coincident; very straight forward. In Creo we have to EVERY time change from Normal to Distance or Coincident. Our designers find this very annoying and no step forward at all from Wildfire.Is there any way to change the sequence of these constraints or even making a "pre Creo" setting?
Currently, in Creo Parametric 2, users have no access to the find tool or the layers in the source window for an external copy geometry. This means if say the axis layer is not shown, you can't search for axes to copy. You have to completely back out of the process, open the source file, turn on the layer in the source file, then restart the command, in order to get to the geometry you need.PTC, please make the Find tool and Layers available in the source copy geometry window.
Erweiterung in Sheet Metal.Es sollen nicht nur Kegeloberflächen abgewickelt werden können, sondern auch Splineoberflächen. Danke für Umsetzung.Gruss Urs Ammann
For the latest Creo Elements/Pro 5.0 M190, import support CATIA up to V5 R19 only. Information from TS, Creo 2.0 M060 import support CATIA V5 R22. As you know, most of users are still using Creo Elements/Pro 5.0 instead of Creo 2.0. So please add Creo Elements/Pro 5.0 import support CATIA V5 R22 too. Thanks.
Until Creo 2.0 M060, Creo 2.0 import support only up to Autodesk Inventor 2009 and 2010. 2009 and 2010 is very old. And now most users are using Autodesk Inventor 2012 & 2013. So PTC should update support.
It is possible to change shrinkage by scale in Creo's base package but it does not leave a tree item for the change. This is potentially quite dangerous to make a change to shrink as there is no record in the feature tree showing this change taking place. You can end up with an unintended size without having a clue in why the model got to this size.The tree item for shrink was removed from the software; this function was possible in Wildfire. You can still see the shrink feature when you retrieve a Wildfire created part into Creo. I've attached how this shows up in Creo's feature tree. I would like this functionality returned to Creo as this potentially could lead to very costly mistakes.
Allow the insert point to be right-click inserted at the end of the feature tree. As it is now, it is only possible to insert it after the next-to last feature.
Shelling a solid model (or creating an offset surface, which I believe uses the same calculation) is often impossible. There might be a small area of the outside surface that has a curvature such that it would be inverted if it were offset to the specified thickness. Consequently it is necessary to laboriously create part of the surface manually to patch this area, (or change the design). Now: this manually created surface is of course different to the one that would be created by the shell command, were it successful. But, it usually (IME) turns out to be quite adequate to the needs of the manufacturer. The surface is not perfect, but it so close to tolerance that it results in a good wall section with no sink marks etc (talking about injection molding, die casting, thixo molding, etc). In other words, if the nominal wall section is 3 mm, this manually created surface might result in a wall section that in some places is, say, 3.05mm and in others 2.95mm.Another way to interpret this
Creo should remember folder settings. As it is now, after a file is opened, Creo forgets the folder settings forlist by sizelist by last modifiedlist with All Versions optionThese settings should be remembered to make searches quicker.
When a new part is started, the ribbon tab should remain at the last ribbon tab used. As it is now, Creo defaults to the "Model" ribbon tab. There is no reason to change to another tab, particularly if it is a customized tab that has all tools needed in it.
In Version 18.1 ist es nicht möglich eine über den entsprechenden Menüpunkt "Z-Biegung" in Sheet-Metal erzeugte Z-Biegung abzuwickeln Fehlermeldung "Versatz kann nicht abgewickelt werden" Auch in Annotation lässt sich keine Flat-Ansicht erstellen, wodurch keine Möglichkeit besteht die größe des Rohmateriales festzulegen, bzw. zu lasern, schneiden, etc.Somit ist die Funktion nicht verwendbar. Eine mit der Funktion "180-Grad-Biegung" erzeugte Biegung läßt sich problemlos abwickeln. Es findet sich nach entsprechender Suche in der Hilfe ein entsprechender Hinweis, dass dies nicht möglich ist. aber derzeit ist dieser Befehl Nonsens, da nicht sinnvoll anwendbar.
I can't seem to figure out how to adjust the note default line spacing in .DRW files.
At present when the cursor pauses on a threaded hole, the flyby text shows "ThreadedHole". In order to find out the diameter of the threaded hole it is necessary to look at the 3D text.The flyby should show the diameter of the threaded hole.In the case of a metric hole, the flyby text should show the M-size (e.g. M6).
Current functionality is, when you activate a part in the assembly, it displays a completly different Quick Access Toolbar than what is shown if you had just opened the part seperately.Proposed functionality, when activating a part in an assembly it should show the same QAT as a part opened by itself.
Idea : You start working on a project, right-click on the folder in the Common Folders to set it as the working directory, then left-click to open this folder and the part/asm.Currently, you have to open the folder, go back one directory, right-click on the desired directory to set it as the working directory, then go back in it.We can define some directories we frenqueltly use as Common Folders, but when selecting them, it's impossible to directly define one of them as the working directory.
DA_DIM_TAN in Drafting and am_create_dim_tang in Annotation are a big improvement.but they should also accept the DIM_OLD_ALIGNMENT function DIM_OLD_ALIGNMENT function---->(DIM_OLD_ALIGNMENT)--+--|ON|--+--> | | +--|OFF|-+DIM_OLD_ALIGNMENT enables or disables linear dimension aligning, when user clicks on reference dimension. ON - enabled OFF - disabled The new alignment feature works in my opinion not always exact when working from a greater distance.I think it would be good if you have both options.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.