Recently active
Yesterday I opened a call about the welding representation in 2D drawing: when the welding is in an offset section, it is not solid. The answer was: this is a characteristic of the program and it is the decided representation. There is no possibility to change it.This behaviour, at my point of view, doesn't comply the drawing rules and it can cause misunderstanding and missing of welding.I propose, at least, to give the possibility to choose the way of representation.
For usage of Modeling at home our engineers wish to connect to their office PC's using RDP. Currently this works (technically), but is not officially supported by PTC. Furthermore the performance is not very good, even with low latencies. Graphical optimizations are present in Modeling for optimal user experience and are not taking into account the possible usage of RDP. I propose to add functionality that optimizes the graphical performance for these use-cases.
The PartLibrary drilling table list in Annotation shows the diameter of each hole in the column Dm. Unfortunately it does not display the metric diameter (e.g. M10) even though this was used to create the hole. This should be made possible.
Annotations Features and Elements are necessary to complete a MBD (Model Based Definition) or PMI (Product Manufacturing Information) model.After the solid is finished all Annotation Features needs to be defined inside the model. Sometimes it's necessary to define Combined Views and Simplified Reps for a better understanding of the detail shown on the screen.As soon as a Annotation Feature is inside a Simplified Rep, it's not possible to redefine or modify it.I was told that an annotation feature is a feature and that's the reason why!On one side it's OK, becasue it's a feature, but on the other side an Annotation Feature cannot modify the geometry of a part, so it's a indirect feature, or in other words an result of geometric features - only a measurement.From my point of view, it must be possible to redefine a annotation Feature inside a Simplified Rep, without any issues. How can we design a MBD model without changing dimension inside a simplified rep? That's absolut not possible. T
Welding features are not affected by following machining: if there is an assembly feature i.e. an hole or a milling, the welding looks not modified. This could cause big problems of misunderstanding. It exists a workaround, but it is not correct and it causes a loss of time and a bigger model with several family tables.Other 3D CAD allow this modification (Inventor).
The "save as" performed by Creo M070 doesn't maintain the name of the original file, but its Name is the file number. I can't understand this behaviour, also because,in Windchill it works different and, in my opinion, in the right way. M030 version works correctly and I don't understand why it has been changed.In this "new" behaviour, it is the same in WF, and for me M030 was one of the best improvements, it is necessary to change the name of all duplicated parts (or do it in Windchill).The proposal is to come back to the behaviour of M030 or, at least, give the possibility to choose the old system (WF and M060 and following) or new system (as M030).
In drawing, I want to be able to use strikethrough in the notes and tables
The new 3D Box Select tool doesn't provide the user the same options as the CTRL+. Once items are selected it should be irrelevant which method was used to select them and have the same options available with either method.Options which should be added:DeleteGroupSuppressMove to New SubassemblyReplaceBackup referencesHide
Would liek the ability to easily create custom symbols to use exactly as the standard symbols in text/dimension fix text etc. Customer has a custom symbol he uses to mark dimensions, but these are separate sketches and hence dont move when you move the dimension.
it seems, milling is important and turning can wait... I can use "Attachments" on my cutting tools while playing a path for milling and drilling sequences. But the option is not available for Turning sequences. which is a pitty..
Wenn in Modeling zu einer Konfiguration eine Darstellungsliste gespeichert ist und man ändert den Besitzer eines dargestellten Objekts (Teil/Baugruppe), dann wird dieses in der Konfiguration weiterhin bewegt, aus der Darstellungsliste wird es jedoch entfernt.Dieser Effekt sollte vermieden werdenAnbei ein Video Video Link : 4369
If I have an open surface with an edge that I want to round, and the two adjacent boundaries of the intersecting surfaces lie on a plane, then the round created on this edge should lie on the same plane as the adjacent edges. Instead, it often lifts up and away from the boundary. (see the attached pic)Let's change this command so the user has at least the option of extending by default the round down to the plane. I think this should be the deafult option, as I find it difficult to imagine why anyone would want the edge of the round to lift up and away from the plane that the adjecent boundaries are lying on.
I'm really surprised how "under the radar" the (new?) CTQ toggle for Annotations is. What I'd like to see is the ability to define a Symbol that is applied or added to the annotation on face of drawing when CTQ is set to true (checked). In a really perfect world the symbol could have an indexing capability so you could cross reference a given Special Characteristic ina separate document such as control plan (and yes, I've seen the power of transferring CTQ data from Creo to Windchill Part to the (formerly Relex) Control Plan). It's all really powerful stuff, especially the transfer of values... It eliminates potential transposition errors and minimizes the potential for out-of-datedness errors. It seems such a shame to be adding disconnected symbols (and the potential for error) manually.In summary - Idea is to add automated Special Characteristic Symbols (for Drawings) to the CTQ functionality in Annotations(Sorry about duplicating the Discussion that was inten
The standard holes when you choose ISO in Creo should in fact be according to ISO.What it looks like today Creo Paramteric 1 & 2:But the ISO standard are these three for a M12:12x112x1.2512x1.5
It would be a fine thing, that when a new version comes, you could just copy your personal customizations to the new location.Now you have to set all the customizations manually, otherwise it happen the strangest errors.Es wäre eine feine Sache, wenn man seine persönlichen Anpassungen einfach an die neue Position kopieren könnte, wenn eine neue Programmversion kommt.Jetzt müssen alle Anpassungen erneut manuell eingestellt werden, sonst passieren die seltsamsten Fehler.
We have a need in a project to retrieve Dimension's witness line condition (erase/show).We need retrieve if witness line is clipped, and if so need to retrive clipped point.I have contacted support, and support confirmed there is no API to retrieve witness line condition, and clipped inforation.Please enhace Pro Toolkit to have API to support these operation.
For 3D standard notes, we need the ability to add custom, variable symbols into the flat screen display of notes.For this to happen, we would like the ability to create our own custom symbol palette thru Pro/Toolkit. Right now, our only alternative is that the notes that we create are totally graphic - the entire note is a symbol. This causes complications with moving and swapping notes.Please update the 3D model note functionality to support "in-line" references of existing detail symbol definitions. This enhancement should support the use of the &sum (<symdef-name>) notation that is currently available with drawing notes.In drawing notes, an instance of &sym (<symdef-name>) will display the symbol named "symdef-name" in the body of the note. The note text to the left and right of &sym() is properly spaced to accomodate the symbol graphics. If the symbol graphics height is greater than that of the note font, the spacing of the curr
when I want to creat a thigonal note, but the ballloon note only can create cirle shap,so I hope it can add more chose about it!
When examining or re-defining a Named View in the View Manager, the references for that view are not displayed, but should be. For families of complex, but similar parts or for assemblies and most-of-all for generating drawing templates, consistency of the references definitions of Named Views between individual parts or assemblies can be critical. Currently, trial-and-error is the only to try to understand how a Named View was defined.
Command search is a really nice add-on to the interface, but it should be possible to go through the list of suggested commands using cursor keys and launch the command with hitting ENTER key. Right now we can type desired text and get search results, but to actually do anything with them one needs to use mouse and click appropriate command on the list.It would be much faster to not take hands away from the keyboard and just go through the list with cursor keys and then run selected command with ENTER key.
A range of spring can not be defined in the configuration. In other CAD you can define a deformable part programs for this purpose. This command is missing from the Modeller. A spring should be shorter when enabled.In der Konfiguration kann man einen Federweg nicht definieren. In anderen CAD Programmen kann man hierzu ein deformierbares Teil definieren. Dieser Befehl fehlt im Modeller. Eine Feder sollte bei aktivierter Konfiguration kürzer werden.
Reactions force visualisation is not possible in Creo for geometry not attached with beam finite element.In "Creo Simulate Results": Window "Result Window Definition" "Display type" = "Model" "Quantity" = "Reactions at point constraits"Reaction force visualisation is not possible when "resitriction" is not attached with beam type finite element.Reactions forces has to be obtain on all finite element type : 1d ( rigid, spring ), 2d (shell element), 3dThere is a risk that the user do not verify his FE model reactions force because these results are not available.He has to model beam finite element linked to obtain reactions forces.This is particulary true when reactions force are spread in the finit element model.
It would be a great addition to have a “Next” button in the “Move_2D” command.This would eliminate the need to end the running command to start another 2D move.
The function Cross section is available in Modeling, however this function creates normal lines on a workplane.We would like to see the same function also be able to create the cross section in construction lines.This is part of PTC Creo Elements/Direct Modeling 19.0
Hi Experts,In PLAY PATH dialog box, View > Collision Checking and Stop at Collision, use the defailt Diplay Speed or fast display speed, the collision may not be found. Use the slow display speed, the collision can be found.In help topic "Collision Checking Options", there is a note: The lesser the speed of tool path display, the higher is the accuracy of collision checking. Now the question is: How to set the display speed value so as to the collision can be found and cannot leave out any collision? Video Link : 4392
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.