Recently active
Currently, the column settings cannot be saved in the simplified representation dialog box.This means users must reconfigure the columns every time they want to see the common name or description.PTC, please allow column settings to be saved in simplified rep dialog box.
Currently "Remember extension filter" setting is only stored in session memory and is not a persistent setting. When there are dxf files from third parties etc associated with a project, as well as .mi files and other Creo Elements Direct native files, it makes things simpler to be able to see all these files by default, especially for occasional users.Can this be changed to be a persistent setting?
CS19262 says that drawings will now open with a model that is present on all sheets as the active model.We need the model that is active at save to be active when the drawing is reopened.This is because when detailing subassemblies, we also add a simplified rep of the top level (65 000 parts) to show additional detail. However the sub-assembly as such does not appear on each sheet. Thus when we publish the drawing in Windchill, the top level assembly is being regenerated every time a sub-assembly drawing is published taking about 3 hours.We have to regenerate the drawing models as the mass properties are not correct on opening due to the presence of assembly cuts.
Currently, when a user is creating a pipeline, the dialog box to specify which linestock only lists linestocks already added and an option to create a new one. If the desired linestock has not been added, the user has to exit the operation, add the linestock, and then restart the pipeline feature.Please add the option to retreive a linestock from the file system while creating a pipeline.
Why do i have to continue to tell creo, that i dont want to be bothered by the yellow popup menus.i want to either be able to save theese settings, or disable the popups all together.Its not that i dont like clicking franticly every time i start Creo, its more, that my mapkeys wont work the first time i use them
Request: Allow spaces and periods in the Name field when creating a part, assembly or annotationBackground:When creating a part, HP R&D uses * the "Name" field for a description of the part.* the "Model Name" field for the HP part numberHP R&D users would like to be able to enter "Screw M2.5 X 6mm long" into the Name field to improve the readability of the part field and allow us to cut and paste 40 character descriptions from SAP into this field without modication. Currently, we modify this field to Screw_M2p5_X_6mm_longNot very legible is it? Now imagine you have an assembly tree with 1600 unique parts, this is where it becomes taxing to read through.Currently spaces are not allowed in the Name field and period while allowed are confused with instances (i.e. screw.1, screw.2, screw.3)Aspirational Request: If a part named screw is used in an assembly 3 times, instead of seeing screw, screw.1 and screw.2 in the Structure Browser, just show screw 3 times. I understand this may b
About the function of reference lines in technical drawings, we would like you to change the presentation of reference lines from leader lines so that we could write reference lines in vertical.
It is not possible to add several conditions in Creo View for showing attributes.I would like to have possible to choose several attributs. Could be added somthing like this: *COMMON*;*MATERIAL*;….? This worked in ProductView 9!Best Regards, Magnus Persson
Problem:Importing ProE/Creo files with the precision of the part is from ProE/Creo is often low. For further work this often is a problem (for example importing a sheet metal and generating a flat projection).Workaround is Export in Stp and Import with higher precision.Ideally woul be the possibility to adjust optional precision during Import od ProE/Creo files.Thomas SchadFa. Scirotec
I would like the STL triangles on flat, circular surfaces generated, generated axially.Step size does help, but the triangles are still not evenly shaped.The first image is how they are generated currently.Below is how I would like to have them generated.
Components (defined with default relative accuracy) with “small” interferences can pass through the Global Interference Analysis.Inaccurate result: "There are no interfering parts"It would be useful to add a tolerance (or accuracy) value in the Global Interference Analysis box.
Is it possible during batch animation to "hide" or "making not visible" some component? ProAnimobjectCreate ProAnimframeObjAdd permits to move some components during animation. The components not included in the frames remains steady but still visible. The goal is to "hide" some components during the animation.
The measurement tool should be able to also measure max distance of curved surfaces. If I need to know the distance between a flat surface/plane and cylinder edge, currently you can you pick "through axis" and "not through axis" which is essentially the minumum distance. If you need the max distance you have to find some other way to pick the edge.
It would be nice to have some settings to define a view without any view label. Even with "No Label" option, the view label does appear like a text placeholder. It could be confused with some other texts placements.
Scenario: There are couple of options to create Datum Targets in MBD model. But when we need to add or create multiple datum targets at same location then we can create them one after another. While doing that there will be multiple leader lines for multiple datum targets. This will create confusion while checking the model. Issue: We can add one datum target with leader line and all other without leader line. But the targets without leader line we need to specify the location. So for doing this we need to attach all datum targets manually and this will be helpful for reducing the confusion. But all those targets without leader lines are movable and we can not restrict their movement. Requirement: So as like drawing file as functionality of Relate To Object, Can we have same functionality in MBD model so that all other datum targets can relate to one with leader line.
Creo 7 has the capability to create "Standard" holes (internally threaded features). Part of that functionality is to read information from the .hol file and transfer it to the Properties tab and (at least a subset of info) to the Note tab. The note then can be displayed on a combination state. This is very handy. But the same functionality does not exist for externally threaded features. Make an extrude or revolve then apply a "Standard" cosmetic thread. It reads the same .hol file and transfers it to the Properties tab, but there is no Note tab. You're stuck having to make your own note. Not very handy. This is an enhancement request to be able to auto-generate notes for external cosmetic threads (externally threaded features). Thanks!
Allow the end user to swap two rows in the family table similar to being able to swap two columns.Do this without using Excel because either the data transfer between the two is not reliable or that there is not access to Excel.(Updated since they are going to be looking at ideas for the January 2014 TC Meetings)
There should be way to export the Creo parametric file to pvs or pvz format with the capability to lock the measurement in the Creo view software.
The ribbon interface makes users less productive than ever before. It requires more time and mouse clicks to do the same operations than in previous versions, despite the propoganda put out by PTC. The ribbon UI also eliminates the opportunity for users to utilize the innate human ability to spacially recognize objects. Limited customization options and poor use of screen space compound the issue. Leave bad UI implementation to Microsoft, do your own useability research and build a UI that works specifically for CAD users.Above all, remove the ribbon from future releases of Creo.
1. As known, table is one of the most important functionality not only in drawing but also in 3D annotation.2. Customer LG do not use drawing, they do all needs in 3d annotation include table functionality (with symbol type)3. But when needs to add addtional information to table, addtional columns or rows is required to add.4. It is very inconvenient to modify symbol and add the requires everytime.5. Request to add a functionality to modify table in 3D annotiaton directly when needed.
Many years ago I used Pro/Desktop PTC software - it was really good. UI was very intuitive and user friendly! There was an option to show all workplanes - datum planes "as glass" - it means all datum planes have light green clolur with high level of transparency. As a result of that user can see better where the datums interfere with the geometry. It is posible to obtain similar result using Fill, but I think If we'll have just a checkbox in the context menu for Datum Plane feature to see it "as glass" - will be really great!
Voting for this means that geometry can be sketched and patterned within the sketch. It saves the user time of creating a feature then patterning it. This feature is available in other parametric software.
Working with auto generated numbers from windchill the list items in all user interfaces ( include/exclude models from sections or simp. representations, confict box, open/save dialog, ...) are only given by the filename=auto number.There should be an config option as display_modelname_in_ui with values file_name (display filename only, standard)common_name (display ptc_common_name only)file_common_name (display filename & ptc_common_name)
We restrict our skeleton models to surfaces only. no solid features. I'd like a config option that prevents solid features from being created in a skeleton model.
Currently if your datum display filters are turned off when you select a datum feature in the model tree you will not see the feature highlight in the graphics window. I would like an option to be able to see the highlighted feature in graphics window when selected from the model tree regardless of display filter state.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.