Recently active
Currently drawing formats need to be replaced one by one. Multiple sheets can be selected so they all appear in the setup window, but each sheet still needs to be selected one by one for the format to be changed.Add an option to be able to select multiple sheets and "Replace All".
When placing a UDF (User Defined Feature) you must manually move to the next required reference in the pop up window. This causes you to move your mouse back and forth from selecting the reference on your model back to the pop up to select the next requirement. This is not only a time killer but forces you to take your eyes off of your work.Modify the functionality so once a reference is selected on your model and the requirement is fulfilled, the pop up automatically advances to the next reference required. Or make it so clicking the right mouse button will advance to the next requirement.This could potentially work on features other than UDF's.
It would be EXTREMELY helpful to allow the ability to change which simplified rep displays for a part drawing view. Many times I've made a drawing with the master rep and later realized I needed to create a rep that eliminates some features for that drawing. Given that most of our drawings have a minimum of 30 dimensions, and typically twice that, along with multiple detail views, it would be great to be able to change which rep displays for a view so I won't have to re-do the entire drawing or use a family table.Thanks for your consideration and for providing this forum for such requests.Best regards,Don Gilbreath
Enhance Global Interference.When performing a Global Interference in an Assembly with several hundreds of parts it's difficult to clearly see the interference especially now that the parts also highlight. By adding the option to view each interfering pair in a Simplified Rep while viewing the interference we can clearly see what we want.
Why is it that when I modify the quick access tool bar that I have to reconfigure it for every condition.It is a different bar when you are in a part, assembly, drawing, or in an assembly and activate a part.When a custom quick access tool bar is made, you should only have to do it once. Not 4 or 5 times for every condition.Make the quick access tool bar the same from the one custom one created.For example, I want the measure tool available in EVERY condition, and it is frustrating that I must edit the quick access tool bar in every condition to get it to show up in every condition. So what is some of the commands will not work. That is more acceptable than having to change every bar in every condition.Here is a pic of my custom bar when Creo is started.Here is my bar when I am in an assyHere is my bar when I activate a part in the assy.
I can't believe this has not been suggested before - a search shows no results for detail scale note.In a Detail drawing view note, we need to remove the Scale without affecting the Name.Currently it's both or none.I know you can set the text size very small for just the scale, but it's not ideal?!
I request that View Names (View Labels) be automatically inserted for ALL types of drawing views (especially for General Views), not just detail and aux views.There should also be ways to manually insert/reinsert view labels should they not show up or are deleted.Besides having a direct view label insertion function, please allow the drawing parameter &view_name to work when used in Notes. The Note can then be used as a customizable/multi-line view label and display the view name the note is attached to/within or related to (Annotate>Relate to Object).
Currently, the only work around is creating in advance a new group.Consequently, an extended customization means a complete rebuild from scratch.
Enable the functionality to use Thru Thread combined with Thru All at assembly level.
In an assembly it is possible to have different components in different display style. It would be good if this functionality could be passed on to a drawing.
I recommend that PTC should implement this option very early.If you create in a sheetmetal Part a coordinate system and you forget to unselect the "Follow surface", then this will automatically produce a Geom Check if you move that on the top of the modeltree.(see pics).Also very annoying is, that this "Follow Surface" option now can't be eliminated (with Edit Definition) Only if you move back the new csys.Please PTC implement a config.pro option to uncheck this by default!greets martin
The RIBBON User Interface can look easy because it looks like the Microsoft Powerpoint UIbut the Current Ribbon implementation for Creo has many disadvantages.1. takes too much screen space because of the Tab Names, the Group names and the fact that it is not possible to customize the number of rows to 2 or even 1 instead of the current 3 rows.2. The possibility to Select Items in the Graphics Window depends on the selected Tab and this reduces the flexibility and introduces frustration for the users.3. For many kind of tasks, the Ribbon requires More Mouse clicks compared to the Wildfire 4 menu's.4. With the Ribbon, it is not possible to have the Message lines above the Graphics.5. The Quick Access toolbar Icons are too small and cannot be enlarged a little bit, for example to the same size as the Icons in the Wildfire 4 menus.6. Customize the Ribbon is not user friendly and takes much more time compared to WF4.7. There is totally
The need for the CTRL button for multiple selections was introduced since Pro/E Wildfire.The Use of the CTRL button has also influence on the 3D graphics manipulation.As a result, the user must release the CTRL button when he wants for example rotate the viewand after the rotation, he must not forget to hit the CTRL button again, otherwise he loose previousselections.In general, the NEED of the CTRL button for multiple selections is contra productive especiallyif the command is given upfront.Frequent cases where the need of the CTRL button is annoying:- second selection in the Analysis Measure dialog in Creo Parametric 3- boundary surfaces selection in 'seed and boundaries' surface set- edge selection for rounds if round command is already given.- etc ...
I'd like to be able to refer to the rpt.index value of a particular BOM item in a note.I like to refer to item numbers in notes along with the actual instructions:EX: Route tubing, Item 5, from manifold, Item 9, to fitting, Item 3.If the index numbers are ever changed, I (or anyone working on the drawing) would need to know that these dumb references exist.Currently, there isn't a way to do this in Creo 2.0.
Need to display in drawing the construction lines buitl in sketcher.The goal is to have a good dimensioning in drawing from fillet trim.
New option to define and force a STEP file to open as a desiredFor example: Avoid switching systematically from Part to Assembly when dragging a STEP file from other CAD program.
If the user forgets to save his or her work for too long (15 minutes or more) Creo could show a pop up suggestion for the user to do so. This could be non configurable or user configurable to different durations ("only prompt after 45 minutes"for example).While many Creo users are seasoned professionals, we are all human and sometimes for reasons that seem inexplicable we just forget to save, then comes a fatal error and we lose all that work. From personal experience this has cost me anywhere from 2 to 6 hours this year alone. Maybe a save reminder could help.
There is a config option def_layer LAYER_AXIS_ENT that creates a layer and adds the axis entities from features (not the features themselves). However, in modelcheck, the parameter PRT_LAYER 'NAME' 'STATUS" AXIS or DATUM_AXIS can not check for axis entities. PTC insists this is an enhancement. Because of this, the check LAYER_PLACE for an axis is 100% useless. It won't give an error an axis entity. It will only give errors for AXIS features. It WILL give errors for features that have AXIS in them. So either it gives an error you have features or it doesn't give an error that it is missing entities. Either way; you can't use it.
We need to mark through revision cloud on the drawing. However creating revision cloud is not in curent functionality. Creating revision cloud by making symbol is long process and also not usable repeatadly since shape of revision cloud may not be same for all places. Since we are adopting creo also for preparation of drawing, I wish this functionality is present in the future release of the CREO software.Regards,Jayanta Sarkar
Allow option to get all edges from selected surface. Currently to do this you need to use loop and do this as many times as there are closed loops.Just add "All" option, then select surface and Creo should grab all edges.
The points from an external merge can not be used as reference to create point patterns and holes. The pattern only allows the selection of sketched points and datum points features created in the same model. It could exists a third option that allows selection of points regardless what kind of feature is, including those coming from the external merge. Regarding the hole feature, the software does not allow the selection of datum points from external merge as a hole center.These two restrictions limit the functionality to use models as reference to control geometries in other parts without referencing the assembly. As work around, it is necessary recreate all points referenced on the merged points to be able to use as reference for a pattern.We have additional work if we add or delete points in the merged part. In parts which depend from a model, it is necessary redefine all the parts to create the new or delete the old references.
This idea on the integration of Modeling and Model Manager is something i send to CoCreate in 2004. Reading product idea 1061 i thougt it might be useful to add it here as a product idea. We have a company wide multidisciplinary PLM system that is used for interdisciplinary communication and for the release process to the production departments. Besides that we need a database (lets call it Model Manager, MM) that is tightly integrated with the mechanical design tools (OneSpace designer modeling/Annotation). Part (article) structure is managed in the PLM system. The design structure is managed in ModelManager. In the design phase of a project the mechanical engineer only deals with ModelManager. This memo describes some of our ideas on the OneSpace Designer – Model Manager integration. The idea is that we need a kind of BOM in the design environment. However, it should be as simple as possible. We need something like masterdata to keep information like material etc
Currently, sketcher has support only for the simplest spline. Because of their mathematical properties, we would like to have NURBS (non-rational uniform B-splines) implemented in sketcher.This is what we would like to see for a NURBS implementation within sketcher:1. Be able to use all existing constraints.2. Allow tangency at both ends.3. Check box for spline attributes: uniform/non-uniform, rational/non-rational, continuity (1st, 2nd degree), curvature.4. Be able to build NURBS from one or more construction entities in sketch (e.g. line, arc, line)5. Optionally display control points, knots, and weights.6. Allow user to move NURBS by: dragging on curve, modifying control point(s), knot(s), and/or weight(s)7. Specify length.8. Position points along curve either by length or parameter.9. Parameterize in family table.10. Using TOOLKIT/Object Toolkit, create NURBS in sketcher.11. Allow for callbacks/listeners to impose user defined constraints on NURBS.12. Create family of "scaled" curv
Currently Multi tip tools can only be used for Holemaking, Manual cycles and Trajectory milling.It is relevant to expand the usability of multi tip tools to other step types. For example profile steps where you can use multi tip tools for chamfering holes.
Now it is possible to turn off the tips on commands on toolbarsClick File->Customize->OptionsBut there is no possibility to turn off the tips on commands of the ribbon ui
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.