Recently active
Installing Creo under "Program Files" folder is important from a security point of view.However, only administrator edit "Program Files" folder. So, it is difficult to supply config.sup to client PCs.Therefore, it should set the folder where config.sup is saved to other than the "Common Files/text" folder.I wish being able to specify it with environment variables.
Hi, X,Y,Z (WCS) force measures for individual CONTACT interfaces (I asked Ken Short for this in 1999 and again here several times) SPRINGS CONSTRAINTS Should be automatic and committed to a file It is a complete error prone faff to manually create these. Vis model with 100 contacts & 50 springs (not unreasonable) = 450 component measures = RSI & insanity. Reason = QA. Thanks
ModuleWorks need to support material removal of sequences using the same tool but with different NC Sequences CSYS Currently, for all sequences using the same tool, ModuleWorks don't change the tool orientation even if NC Sequence CSYS change (the calculation of the tool orientation is only based on the first NC Sequence CSYS)
Hello, It would be nice to define an option to designate a parameter when you create it by the Restricted Value Parameter list. (parameter.lst & restricted_val_definition) For example, add: Designated = YES in the parameter.lst ND_ParamDefArr_K01 = { { Name = PARAMETER_NAME Type = string Default = 'BLUE' Enum={'BLUE','RED','GREEN','GREY'} Access = full Designated = YES } }
Being new to CREO and this community I have searched for solutions to issues we are having. I have found it confusing trying to find solutions with so many posts for the same issue. I have submitted 2 other posts that describe all of the issues we are having. It wass suggested that I break these long posts into smaller ones. My original posts are here: https://community.ptc.com/t5/Creo-Ideas/Some-CREO-Drawing-Enhancements/idc-p/485687#M9775 https://community.ptc.com/t5/Creo-Ideas/Some-CREO-Enhancements/idc-p/485686#M9774 I am not even sure if this is the location for CREO enhancemments or iif the PTC folks even read these. I apologize in advance for any duplication. Pleae add to this if I have imissed anything. Drawing Symbol Manipulation Issue Drawing symbols (including REF Balloons) cannot be related to another object, like tables and different symbols. Enhancement Solution Allow Drawing Symbols to be able to relate to other
Being new to CREO and this community I have searched for solutions to issues we are having. I have found it confusing trying to find solutions with so many posts for the same issue. I have submitted 2 other posts that describe all of the issues we are having. It wass suggested that I break these long posts into smaller ones. My original posts are here: https://community.ptc.com/t5/Creo-Ideas/Some-CREO-Drawing-Enhancements/idc-p/485687#M9775 https://community.ptc.com/t5/Creo-Ideas/Some-CREO-Enhancements/idc-p/485686#M9774 I am not even sure if this is the location for CREO enhancemments or iif the PTC folks even read these. I apologize in advance for any duplication. Pleae add to this if I have imissed anything. Assembly Sections Issue We use 2 types of section cuts in an Assembly: the 3D Zone and the 2D Cross Section in our drawings. This issue is if we use the 3D Zone section then wherever the planes intersect a s
The only way to view a transparent display of elements and nodes is to select results display types "Vectors" or "Model". There is no way of previewing a transparent mesh using AutoGEM or viewing a transparent but shaded fringe plot in results. If these capabilities could be added, the elements and nodes embedded within the material of components could be seen easily.
Currently in Creo 4.0 M030 you can not enter more than 4 characters in the "Use Suffix" field when performing Save A Copy function.
Currently in Creo 4.0 M030 when trying to create a chamfer referencing an edge of non-perpendicular surfaces you cannot get desired geometry or dimensions as shown in image. The work around is to create via other feature types (Revolve, Sweep, etc..). This process takes more time than desired. Please consider adding this functionality. Desired
We do a fair amount of curved steel members that are outsourced to a small fabrication shop. On these tubes, they weld steel plates to the inside face of the curved steel tube, and place them using the midpoint along an arc. Presently, the only thing we can do is to either place ordinate dimensions in an XY plane to locate these (not easy to measure) or attempt to add multiple arc dimensions or chord lengths to approximate the location. This obviously gets messy as you can see from the attached images. We would like to know if there is a way to add an Ordinate Arc Dimension where you would pick a baseline of an overall arc length, then pick points along that arc that you would like to have listed out in an ordinate orientation, much like you would do with standard ordinate dimensions. We would like to see this functionality on both 2D Annotations (Drawings) and 3D Annotations (in models).
Because our company has 2 "sister" brands, we do many assemblies that are identical, except assembly "X" will have a red part for one brand, and assembly "Y" will substitute that same part in yellow for our other brand. But the other 50 components in assemblies "X" & "Y" are the same. My request: I would like a way to copy the explode state locations from assembly "X" to assembly "Y" for all the parts that are common to the two assemblies. to elaborate: suppose I spend the time to make my explode state and offset lines in "X", and I now need to recreate that explode state for "Y". I'd like to be able to tell Creo: for every component in "Y", see if it is in "X", if so, find its exploded location in "X", and make its exploded location in "Y" the exact same place.
Hi, Mechanism needs to support the multi-thread computing for its analysis.I don't know why this feature is supported for the Simulate's linear analysis and not for Mechanism. In addiction you can add the possibility to "link" more than two servo motors together (a link in position, velocity and/or acceleration); in this manner you can control a chain by changing only one function of one motor.
The design of "Equal" symbol is too long in Stetcher Toolbar. The "equal" symbol represented by shorter and thicker "segments" of Creo Parametric 2.0 is closer to the symbolic design of equality. Please, shorten the segments of the "equal" symbol. ====================================== N.
Add a parameter that stores the quantity of pattern instances for a sketch points hole pattern and a fill hole pattern, where that parameter represents the total number of holes per pattern, and the parameter can be called out in a drawing Hole Table. Note that this parameter already exists for a table hole pattern and a direction hole pattern.
Currently in Creo 4.0 M030, when you want to change the attachment reference of a GTOL the entire GTOL frame moves as well when using "Change Reference". I don't want my frame location moving, i've already taken the time to place where I want it. If I want the frame location to move I can move it just by selecting and dragging. Unnecessary mouse clicks happening to change the leader reference. "Edit Attachment" will break model dependency of a model based GTOL.
In current functionality in Creo, it is not possible to auto collect user defined reps in lower level while creating rule based simplified rep in an asm. In the below image you can notice there is no used defined option is available. It would be wise to have user defined option here so that rule based sim. reps in higher level asm will act dynamically based on the rules as and when adding new componets in asm. Example: In my std components(bolts and nuts), i prepared a used defined feature called "Nothread" to exclude thread related features. So, in an asm i need to have a dynamic rule based simplified rep to show all my std components with Nothread representation. And this representation should be dynamic.
I'd like to be able to output multiple operations in Creo/NC, rather than the current way of single operation output selection. I believe it would save a ton of time for users that wish to output all the operations in a project, because they would not have to be at the machine upon the completion of each output in order to start the next output. Here is what I'd like to see: 1.) Select "save a cl file" 2.) Select "operation" 3.) at the point that all available operations are shown to select from, wouldn't it make sense to be able to "select all" operations for output? 4.) Then I can walk away, go for an office mail run, lunch or etc. 5.) Get back to the computer, and post all the cl files that were output when I was on the other tasks. Thank you!
It is important to allways click "Roll To" during Edit References to avoid unwanted circular references, so there should be an option to allways activate the option by default.
Suppress Pattern instances: I have total 60 holes (6X10). I made first hole and patterened (6) in X direction using Point pattern. Now I patterned (10) first pattern set of 6 in Y direction to get 60 holes. Now my design requires 59 holes only so I need to suppress one hole. I know we cant supress the origin holes but I am looking for an option to suppress Pattern instances. Currently if you select patterrn instances and try to suppress Creo is suppressing entire family.
I would like to have both mechanism connections and normal constraints in an assembly. I know we cant make them in single set. How ever Creo was able to create different sets of constraints. Why shouldnt we have 2 sets created one for normal constraints and the other for mechanism connections. And high level assembly must have option to swap between sets so that all components will change to set 1 or set 2 as required.
It would be nice addition to Creo Simulate to export a bit more things e.g. mass, stiffness and damping matrix and selected eigenvectors form modal analysis result.
On the csv file listing out all the Configuration Options for Creo Parametric, it would be nice if there was a column listing what version of the software that option was released. There should also be a column noting how it changed. That way if you're looking at upgrading you know what options to look at that are New or Changed without having to manually look through the entire list (like I just did for 4.0). The list should also have options that were removed, and if there are replacements mention of what replaced those options. It should list the Version and Build, and how it changed (New, Updated, Removed) Example: CATEGORY: Environment NAME: modify_abs_accuracy_on_convert DESCRIPTION: Absolute accuracy value will be converted on Set Units -> Convert operation VALUES: yes, no DEFAULT VALUE: yes RELEASE: 4.0 F000 CHANGE: New Implem
Hi, for "tools" I mean the possibility to put labels, draw horizontal/vertical lines, extract the graph directly into Mathcad 15/Prime format, change the axis' units. ThanksBye
While creating features we can take surface, line & point references from previously created features. Likewise if we have option to take reference of dimensions of previously created features would be great. We can use equal dimension option in newly creating feature sketch after taking dimension reference from previously created feature. So that I can keep same dimension value in both features. This way I need not to created relations to maintain both values same.
When creating a hyperlink for a note in an Annotation Ribbon, there is no browse button to select an item within Windows Explorer. This creates a high probability of an error with typing the address of the document or deriving it from another tool. There should be a simple browse button. It would be even better if the browse button was able to browse documents within WindChill too.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.